[16] | 1 | <?xml version="1.0" encoding="UTF-8"?> |
---|
| 2 | <xsd:schema |
---|
| 3 | elementFormDefault="qualified" |
---|
| 4 | attributeFormDefault="unqualified" |
---|
| 5 | targetNamespace="http://www.witsml.org/schemas/131" |
---|
| 6 | xmlns:witsml="http://www.witsml.org/schemas/131" |
---|
| 7 | xmlns:xsd="http://www.w3.org/2001/XMLSchema" |
---|
| 8 | version="1.3.1"> |
---|
| 9 | |
---|
| 10 | <!-- --> |
---|
| 11 | <!-- POSC License Agreement |
---|
| 12 | This file is distributed under the POSC License Agreement at |
---|
| 13 | http://www.posc.org/about/license.shtml. |
---|
| 14 | Use of this file constitutes agreement with the POSC License Agreement. |
---|
| 15 | --> |
---|
| 16 | <!-- --> |
---|
| 17 | <xsd:include schemaLocation="cs_fiberInformation.xsd"/> |
---|
| 18 | <xsd:include schemaLocation="cs_boxInformation.xsd"/> |
---|
| 19 | <xsd:include schemaLocation="cs_fiberInstalledPoints.xsd"/> |
---|
| 20 | <xsd:include schemaLocation="cs_fiberEndPoint.xsd"/> |
---|
| 21 | <xsd:include schemaLocation="cs_otdr.xsd"/> |
---|
| 22 | <xsd:include schemaLocation="cs_pumpActivity.xsd"/> |
---|
| 23 | <xsd:include schemaLocation="cs_calibration.xsd"/> |
---|
| 24 | <!-- --> |
---|
| 25 | <xsd:annotation> |
---|
| 26 | <xsd:documentation>DTS Installed System Type</xsd:documentation> |
---|
| 27 | </xsd:annotation> |
---|
| 28 | <!-- --> |
---|
| 29 | <xsd:group name="grp_dtsInstalledSystem"> |
---|
| 30 | <xsd:annotation> |
---|
| 31 | <xsd:documentation>The optical fiber is installed in a wellbore and attached to an |
---|
| 32 | instrument box. Calibrations are performed. In general, this should be a subelement of |
---|
| 33 | a DTS object.</xsd:documentation> |
---|
| 34 | </xsd:annotation> |
---|
| 35 | <xsd:sequence> |
---|
| 36 | <xsd:element name="isPlanned" type="witsml:logicalBoolean" minOccurs="0" maxOccurs="1"> |
---|
| 37 | <xsd:annotation> |
---|
| 38 | <xsd:documentation>Is this a planned installation in a well, or has the |
---|
| 39 | installation already occurred. Note that the default value is 'false', |
---|
| 40 | which states that this is an actual installation.</xsd:documentation> |
---|
| 41 | </xsd:annotation> |
---|
| 42 | </xsd:element> |
---|
| 43 | <xsd:element name="fiberInformation" type="witsml:cs_fiberInformation" minOccurs="0" maxOccurs="1"> |
---|
| 44 | <xsd:annotation> |
---|
| 45 | <xsd:documentation>Information about the fiber used, and its installation.</xsd:documentation> |
---|
| 46 | </xsd:annotation> |
---|
| 47 | </xsd:element> |
---|
| 48 | <xsd:element name="instrumentBoxInformation" type="witsml:cs_boxInformation" minOccurs="0" maxOccurs="1"> |
---|
| 49 | <xsd:annotation> |
---|
| 50 | <xsd:documentation>Information about the instrument box used, and its installation.</xsd:documentation> |
---|
| 51 | </xsd:annotation> |
---|
| 52 | </xsd:element> |
---|
| 53 | <xsd:element name="fiberConfiguration" type="witsml:kindString" minOccurs="0" maxOccurs="1"> |
---|
| 54 | <xsd:annotation> |
---|
| 55 | <xsd:documentation>The configuration of the fiber installation. Example values |
---|
| 56 | would be linear, linear with gauge, J, U.</xsd:documentation> |
---|
| 57 | </xsd:annotation> |
---|
| 58 | </xsd:element> |
---|
| 59 | <xsd:element name="fiberEndPoint" type="witsml:cs_fiberEndPoint" minOccurs="0" maxOccurs="2"> |
---|
| 60 | <xsd:annotation> |
---|
| 61 | <xsd:documentation>A fiber installed with a "U" configuration will have two ends |
---|
| 62 | available for hookup to an instrument box. In order to record which end is |
---|
| 63 | cabled to the instrument box on a particular measurement run, it is necessary |
---|
| 64 | to identify the two ends. This complex type allows a name and description for |
---|
| 65 | each end, so that it may be identified in a later use. This may also be useful |
---|
| 66 | when multiple fibers in multiple wellbores converge at the same wellhead.</xsd:documentation> |
---|
| 67 | </xsd:annotation> |
---|
| 68 | </xsd:element> |
---|
| 69 | <xsd:element name="fiberLength" type="witsml:lengthMeasure" minOccurs="0" maxOccurs="1"> |
---|
| 70 | <xsd:annotation> |
---|
| 71 | <xsd:documentation>The length of the fiber installed in the wellbore.</xsd:documentation> |
---|
| 72 | </xsd:annotation> |
---|
| 73 | </xsd:element> |
---|
| 74 | <xsd:element name="wellboreFiberSchematic" type="witsml:cs_fiberInstalledPoints" minOccurs="0" maxOccurs="1"> |
---|
| 75 | <xsd:annotation> |
---|
| 76 | <xsd:documentation>A table of values along the length along the fiber.</xsd:documentation> |
---|
| 77 | </xsd:annotation> |
---|
| 78 | </xsd:element> |
---|
| 79 | <xsd:element name="opticalBudget" type="witsml:generalMeasureType" minOccurs="0" maxOccurs="1"> |
---|
| 80 | <xsd:annotation> |
---|
| 81 | <xsd:documentation>Total light budget available for the installation. This is |
---|
| 82 | generally measured in decibels, and indicates the total power loss for two-way |
---|
| 83 | travel of the light in the installed fiber.</xsd:documentation> |
---|
| 84 | </xsd:annotation> |
---|
| 85 | </xsd:element> |
---|
| 86 | <xsd:element name="pumpActivity" type="witsml:cs_pumpActivity" minOccurs="0" maxOccurs="1"> |
---|
| 87 | <xsd:annotation> |
---|
| 88 | <xsd:documentation>The activity of pumping the fiber downhole</xsd:documentation> |
---|
| 89 | </xsd:annotation> |
---|
| 90 | </xsd:element> |
---|
| 91 | <xsd:element name="otdrInstallationTest" type="witsml:cs_otdr" minOccurs="0" maxOccurs="unbounded"> |
---|
| 92 | <xsd:annotation> |
---|
| 93 | <xsd:documentation>This captures the data from the pre-installation and post-installation |
---|
| 94 | OTDR tests run on the fiber. A standard quality control program would include these |
---|
| 95 | two, but the schema allows for more than two if additional runs associated with the |
---|
| 96 | installation of the fiber are performed. OTDR runs associated with a measurement are |
---|
| 97 | given as a child of the measurementInformation element.</xsd:documentation> |
---|
| 98 | </xsd:annotation> |
---|
| 99 | </xsd:element> |
---|
| 100 | <xsd:element name="installationCalibration" type="witsml:cs_calibration" minOccurs="0" maxOccurs="unbounded"> |
---|
| 101 | <xsd:annotation> |
---|
| 102 | <xsd:documentation>Any calibration other than the ones explicitly given may be |
---|
| 103 | recorded here. This is a general calibration type, which is populated with name/value pairs.</xsd:documentation> |
---|
| 104 | </xsd:annotation> |
---|
| 105 | </xsd:element> |
---|
| 106 | <xsd:element name="basedOnInstalledFiber" type="witsml:refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 107 | <xsd:annotation> |
---|
| 108 | <xsd:documentation>If an instrument box is changed, for example, but the |
---|
| 109 | fiber remains the same, this instance of installed fiber is given to record |
---|
| 110 | that change. This element refers to a previous installed fiber, on which |
---|
| 111 | this one is based. For example, the wellboreFiberSchematic is unchanged, and |
---|
| 112 | may be obtained from the previous instance of installed fiber that is |
---|
| 113 | referenced here.</xsd:documentation> |
---|
| 114 | </xsd:annotation> |
---|
| 115 | </xsd:element> |
---|
| 116 | </xsd:sequence> |
---|
| 117 | </xsd:group> |
---|
| 118 | <!-- --> |
---|
| 119 | </xsd:schema> |
---|