Summary report Wellbore: 99/99-A-99 T1 End time:  2006-06-06T12:00 Report Number: 1 Period: 2006-06-06T12:00-2006-06-06T00:00 Wellbore: 99/99-A-99 T1 Wellbore Id: 123 Status:   preliminary Created date:   2006-06-06T13:15 Operator:   Big operator Inc Drilling contractor:   Rig name:   NPD Rig Id:   4321 Spud date:   1986-06-06 Date Well Complete:     Elevation RKB-MSL m: 23.5 Water depth MSL m: 15 Tight well:  no High pressure - High temperature   no Pressure psig:  2 Temperature degC:  20 Rig type Wellbore type:    Depth at Kick Off mMD:    1233.22 Depth at Kick Off mTVD:   Depth mMD:   6898 Depth mTVD:   4561 Plug Back Depth mMD:   3564.22 Dist Drilled  m:  78.9 Penetration Rate m/h:  6.22 Hole Dia in:  43.33 Pressure Test Type:   leak off test Formation Strengthg/cm3:  123 Depth At Formation Strength mMD:    1234 Depth At Formation Strength mTVD:  Dia Last Casing  in:  16.6 Depth At Last Casing mMD:   1234.56 Depth At Last Casing mTVD:       Summary of Activities (24 Hours) Yada yada yada Summary of Planned Activities (Next 24 Hours) Bla bla bla Operation   Start Time End Time Start Depth mMD End Depth mMD Depth mMD Main Oper Class Main Oper Eval Class Remark 22:00 23:00 123 123.4 123.4 drilling -- drill ok Bla bla bla 02:00 06:00 123 123.4 123.4 moving -- transit fail Bla bla bla Equipment Failure Information   Start Depth mMD Sub Equip Syst Class Operation Downtime Equipment Repaired Equip Failure Description 2001-12-31T02:00 1234.5 drill floor -- drilling control 180 2002-01-31T02:00 Bla bla bla   Bit Record   Bit size in Run No Model Hours drilled h MD Start m MD end m Hole made (run) m Hours drilled (run) m ROP m/h Total hole made m Total hours drilled h Total ROP m/h Dull grade 24.6 1 SSB 1 24 25 1 1 1 5 8 3 2/3/NO/A/X/I/NO/DTF 12.2 2 SSB 3 24 32 1 3 2 15 22 5 0/4/BT/B/X/I/BU/DTF   Casing/Liner/Tubing information   Type of pipe Casing type Run time Nominal outside diameter in Nominal inside diameter in Nominal Weight lbm/ft Nominal Grade Nominal Connection Length m MD Top/Hangar m MD Bottom/Shoe m Description Casing Top 14:00 18 13 65 12 2 12 30 42 bla bla bla.. Liner Intermediate 17:00 13 10 63 11 3 6 40 46 bla bla bla.. Tubing Production 10:00 21 12 40 13 4 4 54 58 bla bla bla..   Cement information   Start time End time Job type Casing string diameter in Top plug used Bottom plug used Plug bumped Plug bump pressure bar Float held Pressure release time Full returns Cement volume returns m3 Reciprocated Rotated Comments 16:00 17:00 squeeze 16 no yes no 200 yes 2011-02-07T14:00 no 25 no yes bla bla bla... Cement Fluid Information Fluid type Fluid Description Volume pumped m3 Fluid densitiy sg Yield point ft3/sack Mix water ratio gal/sack Free water % Thick time h Comments Spacer bla bla bla... 15 30 12 15 20 5 bla bla bla...   Cement information   Start time End time Job type Casing string diameter in Top plug used Bottom plug used Plug bumped Plug bump pressure bar Float held Pressure release time Full returns Cement volume returns m3 Reciprocated Rotated Comments 14:00 15:00 primary 18 yes no yes 250 yes 2011-02-07T14:00 no 25 no yes bla bla bla... Cement Fluid Information Fluid type Fluid Description Volume pumped m3 Fluid densitiy sg Yield point ft3/sack Mix water ratio gal/sack Free water % Thick time h Comments Mud bla bla bla... 8 27 19 18 40 2 bla bla bla... Slurry bla bla bla... 10 24 12 12 40 3 bla bla bla... Spacer bla bla bla... 10 24 12 12 40 3 bla bla bla...   Pore Pressure   Reading Equ Mud Weight g/cm3 Time Depth mMD Depth mTVD       estimated 23.1 2001-12-31T12:00 321.1 123.4       measured 23.5 2001-12-31T22:00 9321.1 9123.4232         Survey Station   Depth mMD Depth mTVD Inclination Azimuth         123.4 123.4 66.6 55.5           Log Information   Logging Company:Small Service Inc   Run no Depth Top mMD Depth Bottom mMD Tool BHCT degC BHST degC     1 4567.6 4668.9 Hammer 85.6     1 4567.6 4668.9 Hammer 85.6       Core Information   Core no Depth Top mMD Depth Bottom mMD Core length m Recover core % Core barrel length m Inner barrel type Description 1 1234 1234 123 89.9 33.3 aluminum bla bla bla   Well Test Information   Time Test no Type Depth Top mMD Depth Bottom mMD Choke orifice Size mm Density crude oil g/cm3 Oil flow rate m3/d Gas flow rate M M(m3)/d Water flow rate m3/d Shut in pressure MPa Flow pressure MPa Bottom hole pressure MPa Gas oil ratio m3/m3 Water oil ratio m3/m3 Chloride content ppm CO2 content ppm H2S content ppm 02:00 1 production test 1234.5 2345.6 32.1 0.86 77.7 88.8 7.7 44.4 33.3 22.2 23 0.33 22.2 11.1 7.3   Formation Test   Depth mMD Formation pore pressure MPa Good seal ind Depth to sample point m Dominate fluid component HC Component density g/cm3 Sample volume dm3 Description 1234.5 66.5 yes 1224.3 oil 0.33 11 Yada yada yada   Stratigraphic Information   Depth to top of formation mMD Depth to top of formation mTVD Formation name           1234.5 1234 bla bla bla             Lithology Information   Start Depth mMD End Depth mMD Difference in Depth mMD Start Depth mTVD End Depth mTVD Difference in Depth mTVD Shows Description Lithology Description 1234.5 1234.5 0 1234.5 1234.5 0 Browser support: IE: Internet Explorer, M: Mac IE only, F: Firefox, N: Netscape. Browser support: IE: Internet Explorer, M: Mac IE only, F: Firefox, N: Netscape. W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2). W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).   Well Control Incident   Date Depth of well mMD Depth of well mTVD Lost time min Time for well control regain Depth at bit mMD Drilling fluid density g/cm3 Pore pressure g/cm3 Depth to casing mMD Gained vol of Fluid Shut in casing pressure bar Shut in drill pipe pressure bar Incident class Killing procd Formation BHT 2001-12-31 1234.5 16 02:16 123 1.23 1.12 123 112 44 33 oil kick lubricate and bleed jura 258   Browser support: IE: Internet Explorer, M: Mac IE only, F: Firefox, N: Netscape. W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2). W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).   Well Control Incident   Date Depth of well mMD Depth of well mTVD Lost time min Time for well control regain Depth at bit mMD Drilling fluid density g/cm3 Pore pressure g/cm3 Depth to casing mMD Gained vol of Fluid Shut in casing pressure bar Shut in drill pipe pressure bar Incident class Killing procd Formation BHT 2008-12-31 1234.5 16 02:16 123 1.23 1.12 123 112 44 33 oil kick lubricate and bleed jura 258   Browser support: IE: Internet Explorer, M: Mac IE only, F: Firefox, N: Netscape. W3C: The number in the "W3C" column indicates in which CSS recommendation the property is defined (CSS1 or CSS2).   Perforation Information   Time of opening well perf Time of closing well perf Duration well perf Top of perf mMD Bottom of Perf mMD Top of perf mTVD Bottom of Perf mTVD 2001-12-31T02:00 2001-12-31T18:00 duration 1033 1234 999 1100   Gas Reading Information   Time Class Depth to top mMD Depth to bottom mMD Depth to top mTVD Depth to bottom mTVD Highest gas % Lowest gas % C1 ppm C2 ppm C3 ppm IC4 ppm IC5 ppm 02:00:00.000Z shut down gas 1234 1256 999 1120 77.7 44.4 55 55 55 55 55