DTS Pumping Activity The activity of pumping the fiber downhole. A name which can be used to reference the pumping activity. In general, a pumping activity does not have a natural name, so that this element will not be often used. The name of the InstalledFiberInstance that this activity relates to. The date, or dateTime of the pumping activity. The person in charge of the pumping activity. The company that performed the pumping activity. The type of fluid used in the pump. The type of fluid used in the control line. The direction of the pumping. The type of end seal on the fiber. The type of cable meter. The serial number of the cable meter. The date the cable meter was calibrated. True or False. Was a drift run performed? This element should be used to indicate if a drift run was performed or not, where the instance of the drift run (OTDR) is not available. If the OTDR is available, use the OTDRPerformed element to specify the OTDR instance. A reference to the OTDR that was run. If an OTDR was run, but there is not instance of the OTDR to reference, choose the wasDriftRunPerformed element, and set it to True. The length of the excess fiber that was removed. Information about the pumping activity, that is captured in the pump log. Unique identifier for the pump activity.