Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is an extension of the general cs_calibration, and allows for specific parameters associated with an instrument box. The two additional parameters are the offset temperature calibration, and the slope calibration. These allow for a linear shift in temperature vs measurements. Additional offset and slope calibrations may be performed at measurement time. The date of the calibration The business associate that performed the calibration. This may be a standard protocol, or a software application. Attribute name is the name of the parameter. Optional attribute uom is the unit of measure of the parameter. The value of the element is the value of the parameter. Note that a string value may appear as a parameter. Any remarks that may be useful, regarding the calibration information. The temperature offset correction that is applied to the dts instrument box. The temperature slope correction that is applied to the dts instrument box. Unique identifier for the calibration.