1 | <?xml version="1.0" encoding="utf-8"?> |
---|
2 | <xsd:schema |
---|
3 | elementFormDefault="qualified" |
---|
4 | attributeFormDefault="unqualified" |
---|
5 | targetNamespace="http://www.witsml.org/schemas/131" |
---|
6 | xmlns:witsml="http://www.witsml.org/schemas/131" |
---|
7 | xmlns:xsd="http://www.w3.org/2001/XMLSchema" |
---|
8 | version="1.3.1"> |
---|
9 | <!-- --> |
---|
10 | <!-- Energistics License Agreement --> |
---|
11 | <!-- This file is distributed under the Energistics License Agreement at --> |
---|
12 | <!-- http://www.posc.org/about/license.shtml. --> |
---|
13 | <!-- Use of this file constitutes agreement with the Energistics License Agreement. --> |
---|
14 | <!-- --> |
---|
15 | <!--UNUSED: Deleted type q_attgrp_uid.--> |
---|
16 | <!--UNUSED: Deleted type cs_businessAssociate.--> |
---|
17 | <xsd:complexType name="q_cs_commonData"> |
---|
18 | <xsd:annotation> |
---|
19 | <xsd:documentation>WITSML - Common Data Component Schema</xsd:documentation> |
---|
20 | </xsd:annotation> |
---|
21 | <xsd:sequence> |
---|
22 | <xsd:element name="sourceName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
23 | <xsd:annotation> |
---|
24 | <xsd:documentation>An identifier to indicate the data originator. This identifies the server that originally created the object and thus most of the uids in the |
---|
25 | object (but not necessarily the uids of the parents). This is typically a url.</xsd:documentation> |
---|
26 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
27 | </xsd:annotation> |
---|
28 | </xsd:element> |
---|
29 | <xsd:element name="dTimCreation" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
30 | <xsd:annotation> |
---|
31 | <xsd:documentation>When the data was created at the persistent data store.</xsd:documentation> |
---|
32 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
33 | </xsd:annotation> |
---|
34 | </xsd:element> |
---|
35 | <xsd:element name="dTimLastChange" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
36 | <xsd:annotation> |
---|
37 | <xsd:documentation>Last change of any element of the data at the persistent data store. The change time is not updated for a growing object while it is |
---|
38 | growing.</xsd:documentation> |
---|
39 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
40 | </xsd:annotation> |
---|
41 | </xsd:element> |
---|
42 | <xsd:element name="itemState" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
43 | <xsd:annotation> |
---|
44 | <xsd:documentation>The item state for the data object.</xsd:documentation> |
---|
45 | <xsd:appinfo> |
---|
46 | constraints:@type="witsml:q_ItemState",xsd:enumeration="actual",xsd:enumeration="model",xsd:enumeration="plan",xsd:enumeration="unknown",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
47 | </xsd:annotation> |
---|
48 | </xsd:element> |
---|
49 | <xsd:element name="comments" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
50 | <xsd:annotation> |
---|
51 | <xsd:documentation>Comments and remarks.</xsd:documentation> |
---|
52 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
53 | </xsd:annotation> |
---|
54 | </xsd:element> |
---|
55 | </xsd:sequence> |
---|
56 | </xsd:complexType> |
---|
57 | <!--UNUSED: Deleted type cs_connectedNode.--> |
---|
58 | <!--UNUSED: Deleted type cs_curveData.--> |
---|
59 | <!--UNUSED: Deleted type cs_curveDefinition.--> |
---|
60 | <xsd:complexType name="q_cs_customData"> |
---|
61 | <xsd:annotation> |
---|
62 | <xsd:documentation>WITSML - Custom or User Defined Element and Attributes Component Schema. Specify custom element, attributes, and types in the custom data |
---|
63 | area.</xsd:documentation> |
---|
64 | </xsd:annotation> |
---|
65 | <xsd:sequence> |
---|
66 | <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"> |
---|
67 | <xsd:annotation> |
---|
68 | <xsd:documentation>Any element or attribute in any namespace. It is strongly recommended that all custom data definitions be added to a unique |
---|
69 | namespace.</xsd:documentation> |
---|
70 | </xsd:annotation> |
---|
71 | </xsd:any> |
---|
72 | </xsd:sequence> |
---|
73 | </xsd:complexType> |
---|
74 | <!--UNUSED: Deleted type cs_datedComment.--> |
---|
75 | <!--UNUSED: Deleted type q_cs_densityValue.--> |
---|
76 | <xsd:complexType name="q_cs_documentInfo"> |
---|
77 | <xsd:annotation> |
---|
78 | <xsd:documentation>A schema to capture a set of data that is relevant for many exchange documents. It includes information about the file that was created, and high-level |
---|
79 | information about the data that is being exchanged within the file.</xsd:documentation> |
---|
80 | </xsd:annotation> |
---|
81 | <xsd:sequence> |
---|
82 | <xsd:element name="DocumentName" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="1"> |
---|
83 | <xsd:annotation> |
---|
84 | <xsd:documentation>An identifier for the document. This is intended to be unique within the context of the NamingSystem.</xsd:documentation> |
---|
85 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
86 | </xsd:annotation> |
---|
87 | </xsd:element> |
---|
88 | <xsd:element name="DocumentAlias" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
89 | <xsd:annotation> |
---|
90 | <xsd:documentation>Zero or more alternate names for the document. These names do not need to be unique within the naming system.</xsd:documentation> |
---|
91 | </xsd:annotation> |
---|
92 | </xsd:element> |
---|
93 | <xsd:element name="DocumentDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
94 | <xsd:annotation> |
---|
95 | <xsd:documentation>The date of the creation of the document. This is not the same as the date that the file was created. For this date, the document is considered |
---|
96 | to be the set of information associated with this document information. For example, the document may be a seismic binset. This represents the date that the binset |
---|
97 | was created. The FileCreation information would capture the date that the XML file was created to send or exchange the binset.</xsd:documentation> |
---|
98 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
99 | </xsd:annotation> |
---|
100 | </xsd:element> |
---|
101 | <xsd:element name="documentClass" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
102 | <xsd:annotation> |
---|
103 | <xsd:documentation>A document class. Examples of classes would be a metadata classification or a set of keywords.</xsd:documentation> |
---|
104 | </xsd:annotation> |
---|
105 | </xsd:element> |
---|
106 | <xsd:element name="FileCreationInformation" type="witsml:q_fileCreationType" minOccurs="0" maxOccurs="1"> |
---|
107 | <xsd:annotation> |
---|
108 | <xsd:documentation>The information about the creation of the exchange file. This is not about the creation of the data within the file, but the creation of the file |
---|
109 | itself.</xsd:documentation> |
---|
110 | </xsd:annotation> |
---|
111 | </xsd:element> |
---|
112 | <xsd:element name="SecurityInformation" type="witsml:q_securityInfoType" minOccurs="0" maxOccurs="unbounded"> |
---|
113 | <xsd:annotation> |
---|
114 | <xsd:documentation>Information about the security to be applied to this file. More than one classification can be given.</xsd:documentation> |
---|
115 | </xsd:annotation> |
---|
116 | </xsd:element> |
---|
117 | <xsd:element name="Disclaimer" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
118 | <xsd:annotation> |
---|
119 | <xsd:documentation>A free-form string that allows a disclaimer to accompany the information.</xsd:documentation> |
---|
120 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
121 | </xsd:annotation> |
---|
122 | </xsd:element> |
---|
123 | <xsd:element name="AuditTrail" type="witsml:q_auditType" minOccurs="0" maxOccurs="1"> |
---|
124 | <xsd:annotation> |
---|
125 | <xsd:documentation>A collection of events that can document the history of the data.</xsd:documentation> |
---|
126 | </xsd:annotation> |
---|
127 | </xsd:element> |
---|
128 | <xsd:element name="Owner" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
129 | <xsd:annotation> |
---|
130 | <xsd:documentation>The owner of the data.</xsd:documentation> |
---|
131 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
132 | </xsd:annotation> |
---|
133 | </xsd:element> |
---|
134 | <xsd:element name="QueryParam" type="witsml:q_queryParam" minOccurs="0" maxOccurs="1"> |
---|
135 | <xsd:annotation> |
---|
136 | <xsd:documentation>WITSML query parameters.</xsd:documentation> |
---|
137 | </xsd:annotation> |
---|
138 | </xsd:element> |
---|
139 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
140 | <xsd:annotation> |
---|
141 | <xsd:documentation>An optional comment about the document.</xsd:documentation> |
---|
142 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
143 | </xsd:annotation> |
---|
144 | </xsd:element> |
---|
145 | </xsd:sequence> |
---|
146 | </xsd:complexType> |
---|
147 | <xsd:complexType name="q_queryParam"> |
---|
148 | <xsd:annotation> |
---|
149 | <xsd:documentation>A structure for WITSML query parameters. The intent is to allow a query for all objects within an index range (whether or not the object is growing). |
---|
150 | These would typically be something like a daily report.</xsd:documentation> |
---|
151 | </xsd:annotation> |
---|
152 | <xsd:sequence> |
---|
153 | <xsd:element name="dTimMin" type="witsml:q_endpointQualifiedDateTime" minOccurs="0" maxOccurs="1"> |
---|
154 | <xsd:annotation> |
---|
155 | <xsd:documentation>The minimum start time for an object. This only applies to objects with a root level date and/or dateTime element(s). The objects may or not be |
---|
156 | growing objects but the See the API specification for behavior related to this query parameter.</xsd:documentation> |
---|
157 | </xsd:annotation> |
---|
158 | </xsd:element> |
---|
159 | <xsd:element name="dTimMax" type="witsml:q_endpointQualifiedDateTime" minOccurs="0" maxOccurs="1"> |
---|
160 | <xsd:annotation> |
---|
161 | <xsd:documentation>The maximum start time for an object. This only applies to objects with a root level date and/or dateTime element(s). See the API specification |
---|
162 | for behavior related to this query parameter.</xsd:documentation> |
---|
163 | </xsd:annotation> |
---|
164 | </xsd:element> |
---|
165 | </xsd:sequence> |
---|
166 | </xsd:complexType> |
---|
167 | <xsd:complexType name="q_fileCreationType"> |
---|
168 | <xsd:annotation> |
---|
169 | <xsd:documentation>A block of information about the creation of the XML file. This is different than the creation of the data that is included within the |
---|
170 | file.</xsd:documentation> |
---|
171 | </xsd:annotation> |
---|
172 | <xsd:sequence> |
---|
173 | <xsd:element name="FileCreationDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
174 | <xsd:annotation> |
---|
175 | <xsd:documentation>The date and time that the file was created.</xsd:documentation> |
---|
176 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
177 | </xsd:annotation> |
---|
178 | </xsd:element> |
---|
179 | <xsd:element name="SoftwareName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
180 | <xsd:annotation> |
---|
181 | <xsd:documentation>If appropriate, the software that created the file. This is a free form string, and may include whatever information is deemed |
---|
182 | relevant.</xsd:documentation> |
---|
183 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
184 | </xsd:annotation> |
---|
185 | </xsd:element> |
---|
186 | <xsd:element name="FileCreator" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
187 | <xsd:annotation> |
---|
188 | <xsd:documentation>The person or business associate that created the file.</xsd:documentation> |
---|
189 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
190 | </xsd:annotation> |
---|
191 | </xsd:element> |
---|
192 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
193 | <xsd:annotation> |
---|
194 | <xsd:documentation>Any comment that would be useful to further explain the creation of this instance document.</xsd:documentation> |
---|
195 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
196 | </xsd:annotation> |
---|
197 | </xsd:element> |
---|
198 | </xsd:sequence> |
---|
199 | </xsd:complexType> |
---|
200 | <xsd:complexType name="q_securityInfoType"> |
---|
201 | <xsd:annotation> |
---|
202 | <xsd:documentation>Information about the security classification of the document. This is intended as a documentation of the security so that the file will not |
---|
203 | inadvertently be sent to someone who is not allowed access to the data. This block also carries a date that the security classification expires. For example, a well log |
---|
204 | is confidential for a period of time, and then becomes open. All security classes are characterized by their classification systems.</xsd:documentation> |
---|
205 | </xsd:annotation> |
---|
206 | <xsd:sequence> |
---|
207 | <xsd:element name="Class" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
208 | <xsd:annotation> |
---|
209 | <xsd:documentation>The security class in which this document is classified. Examples would be confidential, partner confidential, tight. The meaning of the class is |
---|
210 | determined by the System in which it is defined.</xsd:documentation> |
---|
211 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
212 | </xsd:annotation> |
---|
213 | </xsd:element> |
---|
214 | <xsd:element name="SecuritySystem" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
215 | <xsd:annotation> |
---|
216 | <xsd:documentation>The security classification system. This gives context to the meaning of the Class value.</xsd:documentation> |
---|
217 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
218 | </xsd:annotation> |
---|
219 | </xsd:element> |
---|
220 | <xsd:element name="EndDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
221 | <xsd:annotation> |
---|
222 | <xsd:documentation>The date on which this security class is no longer applicable.</xsd:documentation> |
---|
223 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
224 | </xsd:annotation> |
---|
225 | </xsd:element> |
---|
226 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
227 | <xsd:annotation> |
---|
228 | <xsd:documentation>A general comment to further define the security class.</xsd:documentation> |
---|
229 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
230 | </xsd:annotation> |
---|
231 | </xsd:element> |
---|
232 | </xsd:sequence> |
---|
233 | </xsd:complexType> |
---|
234 | <xsd:complexType name="q_auditType"> |
---|
235 | <xsd:annotation> |
---|
236 | <xsd:documentation>The audit records what happened to the data, to produce the data that is in this file. It consists of one or more events.</xsd:documentation> |
---|
237 | </xsd:annotation> |
---|
238 | <xsd:sequence> |
---|
239 | <xsd:element name="Event" type="witsml:q_eventType" minOccurs="0" maxOccurs="unbounded"> |
---|
240 | <xsd:annotation> |
---|
241 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
242 | </xsd:annotation> |
---|
243 | </xsd:element> |
---|
244 | </xsd:sequence> |
---|
245 | </xsd:complexType> |
---|
246 | <xsd:complexType name="q_eventType"> |
---|
247 | <xsd:annotation> |
---|
248 | <xsd:documentation>An event type captures the basic information about an event that has affected the data.</xsd:documentation> |
---|
249 | </xsd:annotation> |
---|
250 | <xsd:sequence> |
---|
251 | <xsd:element name="EventDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
252 | <xsd:annotation> |
---|
253 | <xsd:documentation>The date on which the event took place.</xsd:documentation> |
---|
254 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
255 | </xsd:annotation> |
---|
256 | </xsd:element> |
---|
257 | <xsd:element name="ResponsibleParty" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
258 | <xsd:annotation> |
---|
259 | <xsd:documentation>The party responsible for the event.</xsd:documentation> |
---|
260 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
261 | </xsd:annotation> |
---|
262 | </xsd:element> |
---|
263 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
264 | <xsd:annotation> |
---|
265 | <xsd:documentation>A free form comment that can further define the event that occurred.</xsd:documentation> |
---|
266 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
267 | </xsd:annotation> |
---|
268 | </xsd:element> |
---|
269 | </xsd:sequence> |
---|
270 | </xsd:complexType> |
---|
271 | <xsd:complexType name="q_cs_dtsBoxInformation"> |
---|
272 | <xsd:annotation> |
---|
273 | <xsd:documentation>The instrument box used for distributed temperature surveys</xsd:documentation> |
---|
274 | </xsd:annotation> |
---|
275 | <xsd:sequence> |
---|
276 | <xsd:element name="installationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
277 | <xsd:annotation> |
---|
278 | <xsd:documentation>The date the instrument box was installed.</xsd:documentation> |
---|
279 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
280 | </xsd:annotation> |
---|
281 | </xsd:element> |
---|
282 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
283 | <xsd:annotation> |
---|
284 | <xsd:documentation>The company that installed the instrument box in the wellbore measurement system.</xsd:documentation> |
---|
285 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
286 | </xsd:annotation> |
---|
287 | </xsd:element> |
---|
288 | <xsd:element name="deInstallationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
289 | <xsd:annotation> |
---|
290 | <xsd:documentation>The date the instrument box was de-installed from the wellbore.</xsd:documentation> |
---|
291 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
292 | </xsd:annotation> |
---|
293 | </xsd:element> |
---|
294 | <xsd:element name="instrumentBox" type="witsml:q_cs_dtsInstrumentBox" minOccurs="0" maxOccurs="1"> |
---|
295 | <xsd:annotation> |
---|
296 | <xsd:documentation>The properties of the instrument box.</xsd:documentation> |
---|
297 | </xsd:annotation> |
---|
298 | </xsd:element> |
---|
299 | </xsd:sequence> |
---|
300 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
301 | <xsd:annotation> |
---|
302 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
303 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
304 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
305 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
306 | </xsd:annotation> |
---|
307 | </xsd:attribute> |
---|
308 | </xsd:complexType> |
---|
309 | <xsd:complexType name="q_cs_dtsCalibration"> |
---|
310 | <xsd:annotation> |
---|
311 | <xsd:documentation>Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is a general type that allows a calibration |
---|
312 | date, business associate, and many name/value pairs.</xsd:documentation> |
---|
313 | </xsd:annotation> |
---|
314 | <xsd:sequence> |
---|
315 | <xsd:element name="dTimCalibration" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
316 | <xsd:annotation> |
---|
317 | <xsd:documentation>The date of the calibration</xsd:documentation> |
---|
318 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
319 | </xsd:annotation> |
---|
320 | </xsd:element> |
---|
321 | <xsd:element name="calibratedBy" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
322 | <xsd:annotation> |
---|
323 | <xsd:documentation>The business associate that performed the calibration.</xsd:documentation> |
---|
324 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
325 | </xsd:annotation> |
---|
326 | </xsd:element> |
---|
327 | <xsd:element name="calibrationProtocol" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
328 | <xsd:annotation> |
---|
329 | <xsd:documentation>This may be a standard protocol, or a software application.</xsd:documentation> |
---|
330 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
331 | </xsd:annotation> |
---|
332 | </xsd:element> |
---|
333 | <xsd:element name="parameter" type="witsml:q_cs_dtsCalibrationParameter" minOccurs="0" maxOccurs="unbounded"> |
---|
334 | <xsd:annotation> |
---|
335 | <xsd:documentation>Attribute name is the name of the parameter. Optional attribute uom is the unit of measure of the parameter. The value of the element is the |
---|
336 | value of the parameter. Note that a string value may appear as a parameter.</xsd:documentation> |
---|
337 | </xsd:annotation> |
---|
338 | </xsd:element> |
---|
339 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
340 | <xsd:annotation> |
---|
341 | <xsd:documentation>Any remarks that may be useful, regarding the calibration information.</xsd:documentation> |
---|
342 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
343 | </xsd:annotation> |
---|
344 | </xsd:element> |
---|
345 | </xsd:sequence> |
---|
346 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
347 | <xsd:annotation> |
---|
348 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
349 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
350 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
351 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
352 | </xsd:annotation> |
---|
353 | </xsd:attribute> |
---|
354 | </xsd:complexType> |
---|
355 | <xsd:complexType name="q_cs_dtsCalibrationParameter"> |
---|
356 | <xsd:annotation> |
---|
357 | <xsd:documentation>Parameters are given by name/ value pairs, with optional uom. The parameter name and uom are attributes, and the value is the value of the |
---|
358 | element.</xsd:documentation> |
---|
359 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
360 | </xsd:annotation> |
---|
361 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
362 | <xsd:annotation> |
---|
363 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
364 | </xsd:annotation> |
---|
365 | </xsd:attribute> |
---|
366 | <xsd:attribute name="uom" type="xsd:string" use="optional"> |
---|
367 | <xsd:annotation> |
---|
368 | <xsd:documentation>The unit of measure of the parameter value.</xsd:documentation> |
---|
369 | <xsd:appinfo>constraints:@type="witsml:q_uomString",xsd:maxLength="24",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
370 | </xsd:annotation> |
---|
371 | </xsd:attribute> |
---|
372 | <xsd:attribute name="name" type="xsd:string" use="optional"> |
---|
373 | <xsd:annotation> |
---|
374 | <xsd:documentation>The name of the parameter.</xsd:documentation> |
---|
375 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
376 | </xsd:annotation> |
---|
377 | </xsd:attribute> |
---|
378 | </xsd:complexType> |
---|
379 | <!--UNUSED: Deleted type cs_dtsErrorReport.--> |
---|
380 | <xsd:complexType name="q_cs_dtsFiber"> |
---|
381 | <xsd:annotation> |
---|
382 | <xsd:documentation>The optical fiber used for distributed temperature surveys</xsd:documentation> |
---|
383 | </xsd:annotation> |
---|
384 | <xsd:sequence> |
---|
385 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
386 | <xsd:annotation> |
---|
387 | <xsd:documentation>A human understandable name for the fiber. This is used for identification of the instance.</xsd:documentation> |
---|
388 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
389 | </xsd:annotation> |
---|
390 | </xsd:element> |
---|
391 | <xsd:element name="mode" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
392 | <xsd:annotation> |
---|
393 | <xsd:documentation>The mode of fiber.</xsd:documentation> |
---|
394 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_FiberMode",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
395 | </xsd:annotation> |
---|
396 | </xsd:element> |
---|
397 | <xsd:element name="type" type="witsml:q_typeOptionalClassString" minOccurs="0" maxOccurs="unbounded"> |
---|
398 | <xsd:annotation> |
---|
399 | <xsd:documentation>Zero or more instances that allow other classifications to be assigned to the fiber.</xsd:documentation> |
---|
400 | </xsd:annotation> |
---|
401 | </xsd:element> |
---|
402 | <xsd:element name="coating" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
403 | <xsd:annotation> |
---|
404 | <xsd:documentation>The type of coating on the fiber.</xsd:documentation> |
---|
405 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
406 | </xsd:annotation> |
---|
407 | </xsd:element> |
---|
408 | <xsd:element name="jacket" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
409 | <xsd:annotation> |
---|
410 | <xsd:documentation>The type of jacket covering the fiber.</xsd:documentation> |
---|
411 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
412 | </xsd:annotation> |
---|
413 | </xsd:element> |
---|
414 | <xsd:element name="coreDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
415 | <xsd:annotation> |
---|
416 | <xsd:documentation>The inner diameter of the core, generally measured in microns (um).</xsd:documentation> |
---|
417 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
418 | </xsd:annotation> |
---|
419 | </xsd:element> |
---|
420 | <xsd:element name="claddedDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
421 | <xsd:annotation> |
---|
422 | <xsd:documentation>The diameter of the core plus the cladding, generally measured in microns (um).</xsd:documentation> |
---|
423 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
424 | </xsd:annotation> |
---|
425 | </xsd:element> |
---|
426 | <xsd:element name="outsideDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
427 | <xsd:annotation> |
---|
428 | <xsd:documentation>The diameter of the cable and all its sheathing, generally measured in microns (um). This is intended to be the diameter of the cable on the |
---|
429 | spool.</xsd:documentation> |
---|
430 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
431 | </xsd:annotation> |
---|
432 | </xsd:element> |
---|
433 | <xsd:element name="refractiveIndex" type="witsml:q_cs_dtsRefractiveIndex" minOccurs="0" maxOccurs="unbounded"> |
---|
434 | <xsd:annotation> |
---|
435 | <xsd:documentation>The refractive index of the fiber. Also included is the frequency in Hz for which this refractive index is valid. There may be multiple instances |
---|
436 | of this element.</xsd:documentation> |
---|
437 | </xsd:annotation> |
---|
438 | </xsd:element> |
---|
439 | <xsd:element name="oneWayLoss" type="witsml:q_cs_dtsOneWayLoss" minOccurs="0" maxOccurs="unbounded"> |
---|
440 | <xsd:annotation> |
---|
441 | <xsd:documentation>The power loss (usually in decibels) per unit of length of the fiber. Also included is the frequency for which this loss is measured. There ay be |
---|
442 | multiple instances of this element.</xsd:documentation> |
---|
443 | </xsd:annotation> |
---|
444 | </xsd:element> |
---|
445 | <xsd:element name="parameter" type="witsml:q_indexedObject" minOccurs="0" maxOccurs="unbounded"> |
---|
446 | <xsd:annotation> |
---|
447 | <xsd:documentation>Additional parameters to define the fiber as a material. These should not be parameters to define the installation of the fiber in a well, or |
---|
448 | other system. This element should be used only if an appropriate parameter is not available as an element, or in the calibration operation.</xsd:documentation> |
---|
449 | </xsd:annotation> |
---|
450 | </xsd:element> |
---|
451 | <xsd:element name="spoolNumberTag" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
452 | <xsd:annotation> |
---|
453 | <xsd:documentation>The spool number located on the particular spool. The spool number may contain alphanumeric characters.</xsd:documentation> |
---|
454 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
455 | </xsd:annotation> |
---|
456 | </xsd:element> |
---|
457 | <xsd:element name="spoolLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
458 | <xsd:annotation> |
---|
459 | <xsd:documentation>The length of the fiber on the spool when purchased.</xsd:documentation> |
---|
460 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
461 | </xsd:annotation> |
---|
462 | </xsd:element> |
---|
463 | <xsd:element name="supplyDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
464 | <xsd:annotation> |
---|
465 | <xsd:documentation>A fiber may go through several manufacturers for its various parts. The supplier is the final company in the chain that supplies the fiber to the |
---|
466 | end user.</xsd:documentation> |
---|
467 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
468 | </xsd:annotation> |
---|
469 | </xsd:element> |
---|
470 | <xsd:element name="supplier" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
471 | <xsd:annotation> |
---|
472 | <xsd:documentation>A fiber may go through several manufacturers for its various parts. The supplier is the final company in the chain that supplies the fiber to the |
---|
473 | end user.</xsd:documentation> |
---|
474 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
475 | </xsd:annotation> |
---|
476 | </xsd:element> |
---|
477 | <xsd:element name="supplierModelNumber" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
478 | <xsd:annotation> |
---|
479 | <xsd:documentation>The model number (alphanumeric) that is used by the supplier to reference the type of fiber that is supplied to the user.</xsd:documentation> |
---|
480 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
481 | </xsd:annotation> |
---|
482 | </xsd:element> |
---|
483 | <xsd:element name="factoryCalibration" type="witsml:q_cs_dtsCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
484 | <xsd:annotation> |
---|
485 | <xsd:documentation>Information about calibrations and quality checks that were performed on the cable at the factory. This is not to include calibrations that are |
---|
486 | run at installation time and at measurement time.</xsd:documentation> |
---|
487 | </xsd:annotation> |
---|
488 | </xsd:element> |
---|
489 | <xsd:element name="installationHistory" type="witsml:q_refNameString" minOccurs="0" maxOccurs="unbounded"> |
---|
490 | <xsd:annotation> |
---|
491 | <xsd:documentation>A reference to a dtsInstalledSytem object that previously used the fiber.</xsd:documentation> |
---|
492 | </xsd:annotation> |
---|
493 | </xsd:element> |
---|
494 | </xsd:sequence> |
---|
495 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
496 | <xsd:annotation> |
---|
497 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
498 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
499 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
500 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
501 | </xsd:annotation> |
---|
502 | </xsd:attribute> |
---|
503 | </xsd:complexType> |
---|
504 | <xsd:complexType name="q_cs_dtsFiberEndPoint"> |
---|
505 | <xsd:annotation> |
---|
506 | <xsd:documentation>A fiber installed in a "U" configuration has two end points that a cable may hook to. When making a measurement, it is useful to be able to say which |
---|
507 | end was hooked to the input from the instrument box. In order to do this, the fiber ends must be identified. The identifier is a name, along with a description to further |
---|
508 | aid the interpreter in determining which end was used as the input</xsd:documentation> |
---|
509 | </xsd:annotation> |
---|
510 | <xsd:sequence> |
---|
511 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
512 | <xsd:annotation> |
---|
513 | <xsd:documentation>A name, unique within the context of the well, for an instrument box cable to hook to.</xsd:documentation> |
---|
514 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
515 | </xsd:annotation> |
---|
516 | </xsd:element> |
---|
517 | <xsd:element name="description" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
518 | <xsd:annotation> |
---|
519 | <xsd:documentation>Any description of the node that may be useful in identifying the hookup.</xsd:documentation> |
---|
520 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
521 | </xsd:annotation> |
---|
522 | </xsd:element> |
---|
523 | </xsd:sequence> |
---|
524 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
525 | <xsd:annotation> |
---|
526 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
527 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
528 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
529 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
530 | </xsd:annotation> |
---|
531 | </xsd:attribute> |
---|
532 | </xsd:complexType> |
---|
533 | <xsd:complexType name="q_cs_dtsFiberInformation"> |
---|
534 | <xsd:annotation> |
---|
535 | <xsd:documentation>The optical fiber used for distributed temperature surveys</xsd:documentation> |
---|
536 | </xsd:annotation> |
---|
537 | <xsd:sequence> |
---|
538 | <xsd:element name="installationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
539 | <xsd:annotation> |
---|
540 | <xsd:documentation>The date the fiber is installed.</xsd:documentation> |
---|
541 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
542 | </xsd:annotation> |
---|
543 | </xsd:element> |
---|
544 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
545 | <xsd:annotation> |
---|
546 | <xsd:documentation>The company that installed the fiber in the wellbore.</xsd:documentation> |
---|
547 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
548 | </xsd:annotation> |
---|
549 | </xsd:element> |
---|
550 | <xsd:element name="deInstallationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
551 | <xsd:annotation> |
---|
552 | <xsd:documentation>The date the fiber was de-installed from the wellbore.</xsd:documentation> |
---|
553 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
554 | </xsd:annotation> |
---|
555 | </xsd:element> |
---|
556 | <xsd:element name="capillaryTubeDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
557 | <xsd:annotation> |
---|
558 | <xsd:documentation>The diameter of the capillary tube into which one or more fibers will be installed. If the installation has fibers that go to different |
---|
559 | wellbores, only those fibers installed in the parent wellbore should be included in this instance.</xsd:documentation> |
---|
560 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
561 | </xsd:annotation> |
---|
562 | </xsd:element> |
---|
563 | <xsd:element name="fiber" type="witsml:q_cs_dtsFiber" minOccurs="0" maxOccurs="unbounded"> |
---|
564 | <xsd:annotation> |
---|
565 | <xsd:documentation>The properties of the fiber or fibers installed in the wellbore.</xsd:documentation> |
---|
566 | </xsd:annotation> |
---|
567 | </xsd:element> |
---|
568 | </xsd:sequence> |
---|
569 | </xsd:complexType> |
---|
570 | <xsd:complexType name="q_cs_dtsFiberInstalledPoints"> |
---|
571 | <xsd:annotation> |
---|
572 | <xsd:documentation>A wrapper for multiple instances of the point in a well.</xsd:documentation> |
---|
573 | </xsd:annotation> |
---|
574 | <xsd:sequence> |
---|
575 | <xsd:element name="installedPoint" type="witsml:q_cs_dtsSingleInstalledPoint" minOccurs="0" maxOccurs="unbounded"> |
---|
576 | <xsd:annotation> |
---|
577 | <xsd:documentation>This carries the information about one point</xsd:documentation> |
---|
578 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
579 | </xsd:annotation> |
---|
580 | </xsd:element> |
---|
581 | </xsd:sequence> |
---|
582 | </xsd:complexType> |
---|
583 | <xsd:complexType name="q_cs_dtsInstrumentBox"> |
---|
584 | <xsd:annotation> |
---|
585 | <xsd:documentation>The instrument box used for distributed temperature surveys</xsd:documentation> |
---|
586 | </xsd:annotation> |
---|
587 | <xsd:sequence> |
---|
588 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
589 | <xsd:annotation> |
---|
590 | <xsd:documentation>A name for the instrument box. This can be used to access the instrument box.</xsd:documentation> |
---|
591 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
592 | </xsd:annotation> |
---|
593 | </xsd:element> |
---|
594 | <xsd:element name="manufacturer" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
595 | <xsd:annotation> |
---|
596 | <xsd:documentation>The ultimate manufacturer of the instrument box.</xsd:documentation> |
---|
597 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
598 | </xsd:annotation> |
---|
599 | </xsd:element> |
---|
600 | <xsd:element name="manufacturingDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
601 | <xsd:annotation> |
---|
602 | <xsd:documentation>The date the manufacturing of the instrument box was completed.</xsd:documentation> |
---|
603 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
604 | </xsd:annotation> |
---|
605 | </xsd:element> |
---|
606 | <xsd:element name="type" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
607 | <xsd:annotation> |
---|
608 | <xsd:documentation>The type of instrument box used.</xsd:documentation> |
---|
609 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
610 | </xsd:annotation> |
---|
611 | </xsd:element> |
---|
612 | <xsd:element name="nameTag" type="witsml:q_cs_nameTag" minOccurs="0" maxOccurs="unbounded"> |
---|
613 | <xsd:annotation> |
---|
614 | <xsd:documentation>An identification tag for the instrument box. A serial number is a type of identification tag however some tags contain many pieces of |
---|
615 | information. This structure just identifies the tag and does not describe the contents.</xsd:documentation> |
---|
616 | </xsd:annotation> |
---|
617 | </xsd:element> |
---|
618 | <xsd:element name="softwareVersion" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
619 | <xsd:annotation> |
---|
620 | <xsd:documentation>The version of the software installed in the instrument box.</xsd:documentation> |
---|
621 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
622 | </xsd:annotation> |
---|
623 | </xsd:element> |
---|
624 | <xsd:element name="factoryCalibration" type="witsml:q_cs_dtsInstrumentBoxCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
625 | <xsd:annotation> |
---|
626 | <xsd:documentation>Information about the calibration of the instrument box that was performed. This includes factory calibrations before shipping, and bench |
---|
627 | calibrations. This does not include calibrations made in preparation for taking measurements.</xsd:documentation> |
---|
628 | </xsd:annotation> |
---|
629 | </xsd:element> |
---|
630 | <xsd:element name="internalOvenLocationNear" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
631 | <xsd:annotation> |
---|
632 | <xsd:documentation>Near distance of the oven from the beginning of the fiber.</xsd:documentation> |
---|
633 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
634 | </xsd:annotation> |
---|
635 | </xsd:element> |
---|
636 | <xsd:element name="internalOvenLocationFar" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
637 | <xsd:annotation> |
---|
638 | <xsd:documentation>Far distance of the oven from the beginning of the fiber.</xsd:documentation> |
---|
639 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
640 | </xsd:annotation> |
---|
641 | </xsd:element> |
---|
642 | <xsd:element name="ovenSetPoint" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
643 | <xsd:annotation> |
---|
644 | <xsd:documentation>The temperature of the oven.</xsd:documentation> |
---|
645 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
646 | </xsd:annotation> |
---|
647 | </xsd:element> |
---|
648 | <xsd:element name="testCable" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
649 | <xsd:annotation> |
---|
650 | <xsd:documentation>The cable used to test the instrument box.</xsd:documentation> |
---|
651 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
652 | </xsd:annotation> |
---|
653 | </xsd:element> |
---|
654 | <xsd:element name="offset" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
655 | <xsd:annotation> |
---|
656 | <xsd:documentation>The offset setting applied to the instrument box based on the factory or bench calibration.</xsd:documentation> |
---|
657 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
658 | </xsd:annotation> |
---|
659 | </xsd:element> |
---|
660 | <xsd:element name="differentialLossSetting" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
661 | <xsd:annotation> |
---|
662 | <xsd:documentation>The power loss over the length of the cable.</xsd:documentation> |
---|
663 | <xsd:appinfo>constraints:@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
664 | </xsd:annotation> |
---|
665 | </xsd:element> |
---|
666 | <xsd:element name="parameter" type="witsml:q_indexedObject" minOccurs="0" maxOccurs="unbounded"> |
---|
667 | <xsd:annotation> |
---|
668 | <xsd:documentation>Additional parameters to define the instrument box as a piece of equipment. These should not be parameters to define the installation or use of |
---|
669 | the box in the wellbore, or other system. This element should be used only if an appropriate parameter is not available as an element, or in the calibration |
---|
670 | operation.</xsd:documentation> |
---|
671 | </xsd:annotation> |
---|
672 | </xsd:element> |
---|
673 | </xsd:sequence> |
---|
674 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
675 | <xsd:annotation> |
---|
676 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
677 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
678 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
679 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
680 | </xsd:annotation> |
---|
681 | </xsd:attribute> |
---|
682 | </xsd:complexType> |
---|
683 | <xsd:complexType name="q_cs_dtsInstrumentBoxCalibration"> |
---|
684 | <xsd:annotation> |
---|
685 | <xsd:documentation>Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is an extension of the general |
---|
686 | cs_dtsCalibration, and allows for specific parameters associated with an instrument box. The two additional parameters are the offset temperature calibration, and the |
---|
687 | slope calibration. These allow for a linear shift in temperature vs measurements. Additional offset and slope calibrations may be performed at measurement |
---|
688 | time.</xsd:documentation> |
---|
689 | </xsd:annotation> |
---|
690 | <xsd:sequence> |
---|
691 | <xsd:element name="dTimCalibration" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
692 | <xsd:annotation> |
---|
693 | <xsd:documentation>The date of the calibration</xsd:documentation> |
---|
694 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
695 | </xsd:annotation> |
---|
696 | </xsd:element> |
---|
697 | <xsd:element name="calibratedBy" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
698 | <xsd:annotation> |
---|
699 | <xsd:documentation>The business associate that performed the calibration.</xsd:documentation> |
---|
700 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
701 | </xsd:annotation> |
---|
702 | </xsd:element> |
---|
703 | <xsd:element name="calibrationProtocol" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
704 | <xsd:annotation> |
---|
705 | <xsd:documentation>This may be a standard protocol, or a software application.</xsd:documentation> |
---|
706 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
707 | </xsd:annotation> |
---|
708 | </xsd:element> |
---|
709 | <xsd:element name="parameter" type="witsml:q_cs_dtsCalibrationParameter" minOccurs="0" maxOccurs="unbounded"> |
---|
710 | <xsd:annotation> |
---|
711 | <xsd:documentation>Attribute name is the name of the parameter. Optional attribute uom is the unit of measure of the parameter. The value of the element is the |
---|
712 | value of the parameter. Note that a string value may appear as a parameter.</xsd:documentation> |
---|
713 | </xsd:annotation> |
---|
714 | </xsd:element> |
---|
715 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
716 | <xsd:annotation> |
---|
717 | <xsd:documentation>Any remarks that may be useful, regarding the calibration information.</xsd:documentation> |
---|
718 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
719 | </xsd:annotation> |
---|
720 | </xsd:element> |
---|
721 | <xsd:element name="offsetTemperatureCalibration" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
722 | <xsd:annotation> |
---|
723 | <xsd:documentation>The temperature offset correction that is applied to the dts instrument box.</xsd:documentation> |
---|
724 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
725 | </xsd:annotation> |
---|
726 | </xsd:element> |
---|
727 | <xsd:element name="slopeCalibration" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
728 | <xsd:annotation> |
---|
729 | <xsd:documentation>The temperature slope correction that is applied to the dts instrument box.</xsd:documentation> |
---|
730 | <xsd:appinfo>constraints:@type="witsml:q_temperatureSlopeMeasure"</xsd:appinfo> |
---|
731 | </xsd:annotation> |
---|
732 | </xsd:element> |
---|
733 | </xsd:sequence> |
---|
734 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
735 | <xsd:annotation> |
---|
736 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
737 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
738 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
739 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
740 | </xsd:annotation> |
---|
741 | </xsd:attribute> |
---|
742 | </xsd:complexType> |
---|
743 | <xsd:complexType name="q_cs_dtsOneWayLoss"> |
---|
744 | <xsd:annotation> |
---|
745 | <xsd:documentation>The The power loss for one way travel of a beam of light, usually measured in decibels per unit length. It is necessary to include both the value (and |
---|
746 | its unit) and the wavelength. The wavelength varies with the refractive index, while the frequency remains constant. The wavelength given to specify this type is the |
---|
747 | wavelength in a vacuum (refractive index = 1).</xsd:documentation> |
---|
748 | </xsd:annotation> |
---|
749 | <xsd:sequence> |
---|
750 | <xsd:element name="value" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
751 | <xsd:annotation> |
---|
752 | <xsd:documentation>The value of the one way loss per unit of length. The usual uom is decibels per kilometre (dB/km), although this might vary depending on the |
---|
753 | calibration method used.</xsd:documentation> |
---|
754 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
755 | </xsd:annotation> |
---|
756 | </xsd:element> |
---|
757 | <xsd:element name="frequency" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
758 | <xsd:annotation> |
---|
759 | <xsd:documentation>The frequency (and uom) for which the one-way loss is measured.</xsd:documentation> |
---|
760 | <xsd:appinfo>constraints:@type="witsml:q_frequencyMeasure"</xsd:appinfo> |
---|
761 | </xsd:annotation> |
---|
762 | </xsd:element> |
---|
763 | <xsd:element name="wavelength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
764 | <xsd:annotation> |
---|
765 | <xsd:documentation>The wavelength (and uom) for which the one-way loss is measured. The reported wavelength should be the wavelength of the light in a |
---|
766 | vacuum.</xsd:documentation> |
---|
767 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
768 | </xsd:annotation> |
---|
769 | </xsd:element> |
---|
770 | </xsd:sequence> |
---|
771 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
772 | <xsd:annotation> |
---|
773 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
774 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
775 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
776 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
777 | </xsd:annotation> |
---|
778 | </xsd:attribute> |
---|
779 | </xsd:complexType> |
---|
780 | <xsd:complexType name="q_cs_dtsOtdr"> |
---|
781 | <xsd:annotation> |
---|
782 | <xsd:documentation>This records the result arrays, along with context information, from an Optical Time Domain Reflectometry (OTDR) run. The arrays will define the |
---|
783 | relative scattered power from the Rayleigh scattering vs distance along the fiber. The actual data values are recorded in a wellLog object, which is referenced in a |
---|
784 | subelement.</xsd:documentation> |
---|
785 | </xsd:annotation> |
---|
786 | <xsd:sequence> |
---|
787 | <xsd:element name="reasonForRun" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
788 | <xsd:annotation> |
---|
789 | <xsd:documentation>The reason the OTDR test was run. The three main reasons are 'pre-installation', which is before the installation of the fiber; |
---|
790 | 'post-installation', which is used to validate a successful fiber installation; and 'DTS run', which is a quality check of the fiber prior to a DTS run. A fourth |
---|
791 | permitted value is 'other'.</xsd:documentation> |
---|
792 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_OTDRReason",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
793 | </xsd:annotation> |
---|
794 | </xsd:element> |
---|
795 | <xsd:element name="dTimRun" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
796 | <xsd:annotation> |
---|
797 | <xsd:documentation>The dateTime of the run.</xsd:documentation> |
---|
798 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
799 | </xsd:annotation> |
---|
800 | </xsd:element> |
---|
801 | <xsd:element name="dataInWellLog" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
802 | <xsd:annotation> |
---|
803 | <xsd:documentation>A reference to the well log used to record the table of data.</xsd:documentation> |
---|
804 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
805 | </xsd:annotation> |
---|
806 | </xsd:element> |
---|
807 | <xsd:element name="fiberEndConncected" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
808 | <xsd:annotation> |
---|
809 | <xsd:documentation>A pointer to the fiber connection node. If more than one node is available for a well/wellbore, this element is used to specify which node is |
---|
810 | connected to the instrument box. This name should correspond to the fiberEndPoint/name that is recorded in the installed system object.</xsd:documentation> |
---|
811 | </xsd:annotation> |
---|
812 | </xsd:element> |
---|
813 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
814 | <xsd:annotation> |
---|
815 | <xsd:documentation>A general comment about the OTDR run.</xsd:documentation> |
---|
816 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
817 | </xsd:annotation> |
---|
818 | </xsd:element> |
---|
819 | </xsd:sequence> |
---|
820 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
821 | <xsd:annotation> |
---|
822 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
823 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
824 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
825 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
826 | </xsd:annotation> |
---|
827 | </xsd:attribute> |
---|
828 | </xsd:complexType> |
---|
829 | <!--UNUSED: Deleted type cs_dtsProcessedWellLog.--> |
---|
830 | <xsd:complexType name="q_cs_dtsPumpActivity"> |
---|
831 | <xsd:annotation> |
---|
832 | <xsd:documentation>The activity of pumping the fiber downhole.</xsd:documentation> |
---|
833 | </xsd:annotation> |
---|
834 | <xsd:sequence> |
---|
835 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
836 | <xsd:annotation> |
---|
837 | <xsd:documentation>A name which can be used to reference the pumping activity. In general, a pumping activity does not have a natural name, so that this element |
---|
838 | will not be often used.</xsd:documentation> |
---|
839 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
840 | </xsd:annotation> |
---|
841 | </xsd:element> |
---|
842 | <xsd:element name="installedFiber" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
843 | <xsd:annotation> |
---|
844 | <xsd:documentation>The name of the InstalledFiberInstance that this activity relates to.</xsd:documentation> |
---|
845 | </xsd:annotation> |
---|
846 | </xsd:element> |
---|
847 | <xsd:element name="pumpingDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
848 | <xsd:annotation> |
---|
849 | <xsd:documentation>The date of the pumping activity.</xsd:documentation> |
---|
850 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
851 | </xsd:annotation> |
---|
852 | </xsd:element> |
---|
853 | <xsd:element name="engineerName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
854 | <xsd:annotation> |
---|
855 | <xsd:documentation>The person in charge of the pumping activity.</xsd:documentation> |
---|
856 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
857 | </xsd:annotation> |
---|
858 | </xsd:element> |
---|
859 | <xsd:element name="serviceCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
860 | <xsd:annotation> |
---|
861 | <xsd:documentation>The company that performed the pumping activity.</xsd:documentation> |
---|
862 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
863 | </xsd:annotation> |
---|
864 | </xsd:element> |
---|
865 | <xsd:element name="pumpFluidType" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
866 | <xsd:annotation> |
---|
867 | <xsd:documentation>The type of fluid used in the pump.</xsd:documentation> |
---|
868 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
869 | </xsd:annotation> |
---|
870 | </xsd:element> |
---|
871 | <xsd:element name="controlLineFluid" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
872 | <xsd:annotation> |
---|
873 | <xsd:documentation>The type of fluid used in the control line.</xsd:documentation> |
---|
874 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
875 | </xsd:annotation> |
---|
876 | </xsd:element> |
---|
877 | <xsd:element name="pumpDirection" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
878 | <xsd:annotation> |
---|
879 | <xsd:documentation>The direction of the pumping.</xsd:documentation> |
---|
880 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
881 | </xsd:annotation> |
---|
882 | </xsd:element> |
---|
883 | <xsd:element name="fiberEndSeal" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
884 | <xsd:annotation> |
---|
885 | <xsd:documentation>The type of end seal on the fiber.</xsd:documentation> |
---|
886 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
887 | </xsd:annotation> |
---|
888 | </xsd:element> |
---|
889 | <xsd:element name="cableMeterType" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
890 | <xsd:annotation> |
---|
891 | <xsd:documentation>The type of cable meter.</xsd:documentation> |
---|
892 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
893 | </xsd:annotation> |
---|
894 | </xsd:element> |
---|
895 | <xsd:element name="cableMeterSerialNumber" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
896 | <xsd:annotation> |
---|
897 | <xsd:documentation>The serial number of the cable meter.</xsd:documentation> |
---|
898 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
899 | </xsd:annotation> |
---|
900 | </xsd:element> |
---|
901 | <xsd:element name="cableMeterCalibrationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
902 | <xsd:annotation> |
---|
903 | <xsd:documentation>The date the cable meter was calibrated.</xsd:documentation> |
---|
904 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
905 | </xsd:annotation> |
---|
906 | </xsd:element> |
---|
907 | <xsd:element name="wasDriftRunPerformed" type="witsml:q_booleanTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
908 | <xsd:annotation> |
---|
909 | <xsd:documentation>True or False. Was a drift run performed? This element should be used to indicate if a drift run was performed or not, where the instance of the |
---|
910 | drift run (OTDR) is not available. If the OTDR is available, use the OTDRPerformed element to specify the OTDR instance.</xsd:documentation> |
---|
911 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
912 | </xsd:annotation> |
---|
913 | </xsd:element> |
---|
914 | <xsd:element name="OTDRPerformed" type="witsml:q_refNameString" minOccurs="0" maxOccurs="unbounded"> |
---|
915 | <xsd:annotation> |
---|
916 | <xsd:documentation>A reference to the OTDR that was run. If an OTDR was run, but there is not instance of the OTDR to reference, choose the wasDriftRunPerformed |
---|
917 | element, and set it to True.</xsd:documentation> |
---|
918 | </xsd:annotation> |
---|
919 | </xsd:element> |
---|
920 | <xsd:element name="excessFiberRecovered" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
921 | <xsd:annotation> |
---|
922 | <xsd:documentation>The length of the excess fiber that was removed.</xsd:documentation> |
---|
923 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
924 | </xsd:annotation> |
---|
925 | </xsd:element> |
---|
926 | <xsd:element name="pumpLog" type="witsml:q_cs_dtsPumpLogTable" minOccurs="0" maxOccurs="1"> |
---|
927 | <xsd:annotation> |
---|
928 | <xsd:documentation>Information about the pumping activity, that is captured in the pump log.</xsd:documentation> |
---|
929 | </xsd:annotation> |
---|
930 | </xsd:element> |
---|
931 | </xsd:sequence> |
---|
932 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
933 | <xsd:annotation> |
---|
934 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
935 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
936 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
937 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
938 | </xsd:annotation> |
---|
939 | </xsd:attribute> |
---|
940 | </xsd:complexType> |
---|
941 | <xsd:complexType name="q_cs_dtsPumpLogRow"> |
---|
942 | <xsd:annotation> |
---|
943 | <xsd:documentation>The pump log row are elements defined in the sequence below.</xsd:documentation> |
---|
944 | </xsd:annotation> |
---|
945 | <xsd:sequence> |
---|
946 | <xsd:element name="cableSpeed" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
947 | <xsd:annotation> |
---|
948 | <xsd:documentation>The speed of the cable.</xsd:documentation> |
---|
949 | <xsd:appinfo>constraints:@type="witsml:q_velocityMeasure"</xsd:appinfo> |
---|
950 | </xsd:annotation> |
---|
951 | </xsd:element> |
---|
952 | <xsd:element name="fiberPumpedLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
953 | <xsd:annotation> |
---|
954 | <xsd:documentation>The length of fiber pumped into the wellbore.</xsd:documentation> |
---|
955 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
956 | </xsd:annotation> |
---|
957 | </xsd:element> |
---|
958 | <xsd:element name="pumpPressure" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
959 | <xsd:annotation> |
---|
960 | <xsd:documentation>The operating pressure of the pump.</xsd:documentation> |
---|
961 | <xsd:appinfo>constraints:@type="witsml:q_pressureMeasure"</xsd:appinfo> |
---|
962 | </xsd:annotation> |
---|
963 | </xsd:element> |
---|
964 | <xsd:element name="pumpFluid" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
965 | <xsd:annotation> |
---|
966 | <xsd:documentation>The fluid used in the pumping operation.</xsd:documentation> |
---|
967 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
968 | </xsd:annotation> |
---|
969 | </xsd:element> |
---|
970 | <xsd:element name="temperatureIn" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
971 | <xsd:annotation> |
---|
972 | <xsd:documentation>The temperature going into the wellbore.</xsd:documentation> |
---|
973 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
974 | </xsd:annotation> |
---|
975 | </xsd:element> |
---|
976 | <xsd:element name="temperatureOut" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
977 | <xsd:annotation> |
---|
978 | <xsd:documentation>The temperature at the end of the operation</xsd:documentation> |
---|
979 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
980 | </xsd:annotation> |
---|
981 | </xsd:element> |
---|
982 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
983 | <xsd:annotation> |
---|
984 | <xsd:documentation>Any general remarks about the pumping operation.</xsd:documentation> |
---|
985 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
986 | </xsd:annotation> |
---|
987 | </xsd:element> |
---|
988 | </xsd:sequence> |
---|
989 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
990 | <xsd:annotation> |
---|
991 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
992 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
993 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
994 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
995 | </xsd:annotation> |
---|
996 | </xsd:attribute> |
---|
997 | </xsd:complexType> |
---|
998 | <xsd:complexType name="q_cs_dtsPumpLogTable"> |
---|
999 | <xsd:annotation> |
---|
1000 | <xsd:documentation>Data type supporting a pump log for DST fiber installation data.</xsd:documentation> |
---|
1001 | </xsd:annotation> |
---|
1002 | <xsd:sequence> |
---|
1003 | <xsd:element name="tableRow" type="witsml:q_cs_dtsPumpLogRow" minOccurs="0" maxOccurs="unbounded"> |
---|
1004 | <xsd:annotation> |
---|
1005 | <xsd:documentation>This is a row of the pump log table.</xsd:documentation> |
---|
1006 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
1007 | </xsd:annotation> |
---|
1008 | </xsd:element> |
---|
1009 | </xsd:sequence> |
---|
1010 | </xsd:complexType> |
---|
1011 | <xsd:complexType name="q_cs_dtsRefractiveIndex"> |
---|
1012 | <xsd:annotation> |
---|
1013 | <xsd:documentation>The refractive index of a material depends on the frequency or wavelength of the light. Hence it is necessary to include both the value (a unitless |
---|
1014 | number) and the frequency or wavelength. The frequency will be a quantity type with a frequency unit, such as Hz, kHz, or MHz. The wavelength will be a quantity type with |
---|
1015 | a length unit, such as m, cm, um, in, or ft.</xsd:documentation> |
---|
1016 | </xsd:annotation> |
---|
1017 | <xsd:sequence> |
---|
1018 | <xsd:element name="value" type="witsml:q_doubleTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1019 | <xsd:annotation> |
---|
1020 | <xsd:documentation>The value of the refractive index.</xsd:documentation> |
---|
1021 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_unitlessQuantity",xsd:pattern=".+"</xsd:appinfo> |
---|
1022 | </xsd:annotation> |
---|
1023 | </xsd:element> |
---|
1024 | <xsd:element name="frequency" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
1025 | <xsd:annotation> |
---|
1026 | <xsd:documentation>The frequency (and uom) for which the refractive index is measured.</xsd:documentation> |
---|
1027 | <xsd:appinfo>constraints:@type="witsml:q_frequencyMeasure"</xsd:appinfo> |
---|
1028 | </xsd:annotation> |
---|
1029 | </xsd:element> |
---|
1030 | <xsd:element name="wavelength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
1031 | <xsd:annotation> |
---|
1032 | <xsd:documentation>The wavelength (and uom) for which the refractive index is measured. The reported wavelength should be the wavelength of the light in a |
---|
1033 | vacuum.</xsd:documentation> |
---|
1034 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
1035 | </xsd:annotation> |
---|
1036 | </xsd:element> |
---|
1037 | </xsd:sequence> |
---|
1038 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
1039 | <xsd:annotation> |
---|
1040 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
1041 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
1042 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
1043 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1044 | </xsd:annotation> |
---|
1045 | </xsd:attribute> |
---|
1046 | </xsd:complexType> |
---|
1047 | <xsd:complexType name="q_cs_dtsSingleInstalledPoint"> |
---|
1048 | <xsd:annotation> |
---|
1049 | <xsd:documentation>A set of points recorded during the installation process. The information can include the length along the fiber, the measured depth, and a type of |
---|
1050 | point.</xsd:documentation> |
---|
1051 | </xsd:annotation> |
---|
1052 | <xsd:sequence> |
---|
1053 | <xsd:element name="md" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
1054 | <xsd:annotation> |
---|
1055 | <xsd:documentation>The measured depth of the installed point of the fiber. This is optional, because the sender may want to record points that are outside the |
---|
1056 | well.</xsd:documentation> |
---|
1057 | <xsd:appinfo>constraints:@type="witsml:q_measuredDepthCoord"</xsd:appinfo> |
---|
1058 | </xsd:annotation> |
---|
1059 | </xsd:element> |
---|
1060 | <xsd:element name="lengthAlongFiber" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
1061 | <xsd:annotation> |
---|
1062 | <xsd:documentation>The length along the fiber, from the zero point, for this particular point.</xsd:documentation> |
---|
1063 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
1064 | </xsd:annotation> |
---|
1065 | </xsd:element> |
---|
1066 | <xsd:element name="type" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1067 | <xsd:annotation> |
---|
1068 | <xsd:documentation>The type of point that is being recorded.</xsd:documentation> |
---|
1069 | <xsd:appinfo>constraints:@type="witsml:q_InstalledFiberPoint",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1070 | </xsd:annotation> |
---|
1071 | </xsd:element> |
---|
1072 | </xsd:sequence> |
---|
1073 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
1074 | <xsd:annotation> |
---|
1075 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
1076 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
1077 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
1078 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1079 | </xsd:annotation> |
---|
1080 | </xsd:attribute> |
---|
1081 | </xsd:complexType> |
---|
1082 | <!--UNUSED: Deleted type cs_fluidResultCceTestStep.--> |
---|
1083 | <!--UNUSED: Deleted type cs_fluidResultCompositeComposition.--> |
---|
1084 | <!--UNUSED: Deleted type cs_fluidResultComposition.--> |
---|
1085 | <!--UNUSED: Deleted type cs_fluidResultConstantCompositionExpansionTest.--> |
---|
1086 | <!--UNUSED: Deleted type cs_fluidResultConstantVolumeDepletionTest.--> |
---|
1087 | <!--UNUSED: Deleted type cs_fluidResultContaminant.--> |
---|
1088 | <!--UNUSED: Deleted type cs_fluidResultCvdTestStep.--> |
---|
1089 | <!--UNUSED: Deleted type cs_fluidResultDataQuality.--> |
---|
1090 | <!--UNUSED: Deleted type cs_fluidResultDifferentialLiberationTest.--> |
---|
1091 | <!--UNUSED: Deleted type cs_fluidResultDifferentialLiberationTestStep.--> |
---|
1092 | <!--UNUSED: Deleted type cs_fluidResultJCurveTest.--> |
---|
1093 | <!--UNUSED: Deleted type cs_fluidResultJCurveTestStep.--> |
---|
1094 | <!--UNUSED: Deleted type cs_fluidResultPhaseComposition.--> |
---|
1095 | <!--UNUSED: Deleted type cs_fluidResultSaturationTest.--> |
---|
1096 | <!--UNUSED: Deleted type cs_fluidResultSaturationTestStep.--> |
---|
1097 | <!--UNUSED: Deleted type cs_fluidResultSeparatorTest.--> |
---|
1098 | <!--UNUSED: Deleted type cs_fluidResultSeparatorTestStep.--> |
---|
1099 | <!--UNUSED: Deleted type cs_fluidResultStockTank.--> |
---|
1100 | <!--UNUSED: Deleted type cs_fluidResultTransportPropertiesTest.--> |
---|
1101 | <!--UNUSED: Deleted type cs_fluidResultTransportTestStep.--> |
---|
1102 | <!--UNUSED: Deleted type cs_fluidResultVolumeReference.--> |
---|
1103 | <!--UNUSED: Deleted type cs_generalAddress.--> |
---|
1104 | <!--UNUSED: Deleted type cs_geographicContext.--> |
---|
1105 | <xsd:complexType name="q_cs_nameTag"> |
---|
1106 | <xsd:annotation> |
---|
1107 | <xsd:documentation>WITSML - Equipment NameTag Schema</xsd:documentation> |
---|
1108 | </xsd:annotation> |
---|
1109 | <xsd:sequence> |
---|
1110 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1111 | <xsd:annotation> |
---|
1112 | <xsd:documentation>The physical identification string of the equipment tag.</xsd:documentation> |
---|
1113 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1114 | </xsd:annotation> |
---|
1115 | </xsd:element> |
---|
1116 | <xsd:element name="numberingScheme" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1117 | <xsd:annotation> |
---|
1118 | <xsd:documentation>The format or encoding specification of the equipment tag. The tag may contain may different pieces of information and knowledge of that |
---|
1119 | information is inherent in the specification. The "identification string" is a mandatory part of the information in a tag.</xsd:documentation> |
---|
1120 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_NameTagNumberingScheme",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1121 | </xsd:annotation> |
---|
1122 | </xsd:element> |
---|
1123 | <xsd:element name="technology" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1124 | <xsd:annotation> |
---|
1125 | <xsd:documentation>Identifies the general type of identifier on an item. If multiple identifiers exist on an item, a separate description set for each identifier |
---|
1126 | should be created. For example, a joint of casing may have a barcode label on it along with a painted-on code and an RFID tag attached or embedded into the |
---|
1127 | coupling. The barcode label may in turn be an RFID equipped label. This particular scenario would require populating five nameTags to fully describe and decode all |
---|
1128 | the possible identifiers as follows: 'tagged' - RFID tag embedded in the coupling, 'label' - Serial number printed on the label, 'tagged' - RFID tag embedded into |
---|
1129 | the label, 'label' - Barcode printed on the label, 'painted'- Mill number painted on the pipe body.</xsd:documentation> |
---|
1130 | <xsd:appinfo>constraints:@type="witsml:q_NameTagTechnology",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1131 | </xsd:annotation> |
---|
1132 | </xsd:element> |
---|
1133 | <xsd:element name="location" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1134 | <xsd:annotation> |
---|
1135 | <xsd:documentation>An indicator of where the tag is attached to the item. This is used to assist the user in finding where an identifier is located on an item. This |
---|
1136 | optional field also helps to differentiate where an identifier is located when multiple identifiers exist on an item. Most downhole components have a box (female |
---|
1137 | thread) and pin (male thread) end as well as a pipe body in between the ends. Where multiple identifiers are used on an item, it is convenient to have a reference |
---|
1138 | as to which end, or somewhere in the middle, an identifier may be closer to. Some items may have an identifier on a non-standard location, such as on the arm of a |
---|
1139 | hole opener. 'other', by exclusion, tells a user to look elsewhere than on the body or near the ends of an item. Most non-downhole tools will use either 'body', |
---|
1140 | 'other' or not specified as the location tends to lose value with smaller or non threaded items.</xsd:documentation> |
---|
1141 | <xsd:appinfo>constraints:@type="witsml:q_NameTagLocation",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1142 | </xsd:annotation> |
---|
1143 | </xsd:element> |
---|
1144 | <xsd:element name="installationDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1145 | <xsd:annotation> |
---|
1146 | <xsd:documentation>When the tag was installed in or on the item.</xsd:documentation> |
---|
1147 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
1148 | </xsd:annotation> |
---|
1149 | </xsd:element> |
---|
1150 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1151 | <xsd:annotation> |
---|
1152 | <xsd:documentation>The name of the company that installed the tag.</xsd:documentation> |
---|
1153 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1154 | </xsd:annotation> |
---|
1155 | </xsd:element> |
---|
1156 | <xsd:element name="mountingCode" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1157 | <xsd:annotation> |
---|
1158 | <xsd:documentation>Reference to a manufacturers or installers installation description, code, or method.</xsd:documentation> |
---|
1159 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1160 | </xsd:annotation> |
---|
1161 | </xsd:element> |
---|
1162 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1163 | <xsd:annotation> |
---|
1164 | <xsd:documentation>A comment or remark about the tag.</xsd:documentation> |
---|
1165 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1166 | </xsd:annotation> |
---|
1167 | </xsd:element> |
---|
1168 | </xsd:sequence> |
---|
1169 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
1170 | <xsd:annotation> |
---|
1171 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
1172 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
1173 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
1174 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1175 | </xsd:annotation> |
---|
1176 | </xsd:attribute> |
---|
1177 | </xsd:complexType> |
---|
1178 | <!--UNUSED: Deleted type cs_northSeaOffshore.--> |
---|
1179 | <!--UNUSED: Deleted type cs_offshoreLocation.--> |
---|
1180 | <!--UNUSED: Deleted type cs_personName.--> |
---|
1181 | <!--UNUSED: Deleted type cs_productFlowChangeLog.--> |
---|
1182 | <!--UNUSED: Deleted type cs_productFlowExpectedPortProperty.--> |
---|
1183 | <!--UNUSED: Deleted type cs_productFlowExpectedUnitProperty.--> |
---|
1184 | <!--UNUSED: Deleted type cs_productFlowExternalReference.--> |
---|
1185 | <!--UNUSED: Deleted type cs_productFlowlExternalPort.--> |
---|
1186 | <!--UNUSED: Deleted type cs_productFlowNetwork.--> |
---|
1187 | <!--UNUSED: Deleted type cs_productFlowNetworkPlan.--> |
---|
1188 | <!--UNUSED: Deleted type cs_productFlowPort.--> |
---|
1189 | <!--UNUSED: Deleted type cs_productFlowQualifierExpected.--> |
---|
1190 | <!--UNUSED: Deleted type cs_productFlowUnit.--> |
---|
1191 | <!--UNUSED: Deleted type cs_productionOperationActivity.--> |
---|
1192 | <!--UNUSED: Deleted type cs_productionOperationAlarm.--> |
---|
1193 | <!--UNUSED: Deleted type cs_productionOperationCargoShipOperation.--> |
---|
1194 | <!--UNUSED: Deleted type cs_productionOperationHSE.--> |
---|
1195 | <!--UNUSED: Deleted type cs_productionOperationInstallationReport.--> |
---|
1196 | <!--UNUSED: Deleted type cs_productionOperationLostProduction.--> |
---|
1197 | <!--UNUSED: Deleted type cs_productionOperationMarineOperation.--> |
---|
1198 | <!--UNUSED: Deleted type cs_productionOperationOperationalComment.--> |
---|
1199 | <!--UNUSED: Deleted type cs_productionOperationSafety.--> |
---|
1200 | <!--UNUSED: Deleted type cs_productionOperationShutdown.--> |
---|
1201 | <!--UNUSED: Deleted type cs_productionOperationThirdPartyProcessing.--> |
---|
1202 | <!--UNUSED: Deleted type cs_productionOperationWaterCleaningQuality.--> |
---|
1203 | <!--UNUSED: Deleted type cs_productionOperationWeather.--> |
---|
1204 | <!--UNUSED: Deleted type cs_productVolumeAlert.--> |
---|
1205 | <!--UNUSED: Deleted type cs_productVolumeBusinessUnit.--> |
---|
1206 | <!--UNUSED: Deleted type cs_productVolumeBusinessSubUnit.--> |
---|
1207 | <!--UNUSED: Deleted type cs_productVolumeBusinessOwnershipShare.--> |
---|
1208 | <!--UNUSED: Deleted type cs_productVolumeBusinessAccountInfo.--> |
---|
1209 | <!--UNUSED: Deleted type BusinessUnitKind.--> |
---|
1210 | <!--UNUSED: Deleted type cs_productVolumeComponentContent.--> |
---|
1211 | <!--UNUSED: Deleted type cs_productVolumeFacility.--> |
---|
1212 | <!--UNUSED: Deleted type cs_productVolumeFlow.--> |
---|
1213 | <!--UNUSED: Deleted type cs_productVolumeParameterSet.--> |
---|
1214 | <!--UNUSED: Deleted type cs_productVolumeParameterValue.--> |
---|
1215 | <!--UNUSED: Deleted type cs_productVolumePeriod.--> |
---|
1216 | <!--UNUSED: Deleted type q_cs_productVolumePortDifference.--> |
---|
1217 | <!--UNUSED: Deleted type cs_productVolumeProduct.--> |
---|
1218 | <!--UNUSED: Deleted type cs_productVolumeRelatedFacility.--> |
---|
1219 | <!--UNUSED: Deleted type cs_productVolumeSalesSet.--> |
---|
1220 | <!--UNUSED: Deleted type cs_productVolumeSalesDetail.--> |
---|
1221 | <!--UNUSED: Deleted type cs_productVolumeDestination.--> |
---|
1222 | <!--UNUSED: Deleted type cs_productVolumeSaleEvent.--> |
---|
1223 | <!--UNUSED: Deleted type SaleEventKind.--> |
---|
1224 | <!--UNUSED: Deleted type SalesFlowPart.--> |
---|
1225 | <!--UNUSED: Deleted type SaleDestinationType.--> |
---|
1226 | <!--UNUSED: Deleted type cs_refProductFlow.--> |
---|
1227 | <xsd:complexType name="q_cs_refWellWellbore"> |
---|
1228 | <xsd:annotation> |
---|
1229 | <xsd:documentation>Data that represents a foreign key to a wellbore. The wellbore may be defined within the context of another well.</xsd:documentation> |
---|
1230 | </xsd:annotation> |
---|
1231 | <xsd:sequence> |
---|
1232 | <xsd:element name="wellboreReference" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1233 | <xsd:annotation> |
---|
1234 | <xsd:documentation>A pointer the wellbore with which there is a relationship.</xsd:documentation> |
---|
1235 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
1236 | </xsd:annotation> |
---|
1237 | </xsd:element> |
---|
1238 | <xsd:element name="wellParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1239 | <xsd:annotation> |
---|
1240 | <xsd:documentation>A pointer to the well that contains the wellboreReference. This is not needed unless the referenced wellbore is outside the context of a common |
---|
1241 | parent well.</xsd:documentation> |
---|
1242 | </xsd:annotation> |
---|
1243 | </xsd:element> |
---|
1244 | </xsd:sequence> |
---|
1245 | </xsd:complexType> |
---|
1246 | <xsd:complexType name="q_cs_refWellWellboreRig"> |
---|
1247 | <xsd:annotation> |
---|
1248 | <xsd:documentation>A reference to a rig within a wellbore. The wellbore may be defined within the context of another well. This value represents a foreign key from one |
---|
1249 | node to another.</xsd:documentation> |
---|
1250 | </xsd:annotation> |
---|
1251 | <xsd:sequence> |
---|
1252 | <xsd:element name="rigReference" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1253 | <xsd:annotation> |
---|
1254 | <xsd:documentation>A pointer to the rig with which there is a relationship.</xsd:documentation> |
---|
1255 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
1256 | </xsd:annotation> |
---|
1257 | </xsd:element> |
---|
1258 | <xsd:element name="wellboreParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1259 | <xsd:annotation> |
---|
1260 | <xsd:documentation>A pointer to the wellbore that contains the rigReference. This is not needed unless the referenced rig is outside the context of a common parent |
---|
1261 | wellbore.</xsd:documentation> |
---|
1262 | </xsd:annotation> |
---|
1263 | </xsd:element> |
---|
1264 | <xsd:element name="wellParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1265 | <xsd:annotation> |
---|
1266 | <xsd:documentation>A pointer to the well that contains the wellboreParent. This is not needed unless the referenced wellbore is outside the context of a common |
---|
1267 | parent well.</xsd:documentation> |
---|
1268 | </xsd:annotation> |
---|
1269 | </xsd:element> |
---|
1270 | </xsd:sequence> |
---|
1271 | </xsd:complexType> |
---|
1272 | <!--UNUSED: Deleted type cs_relativeCoordinate.--> |
---|
1273 | <!--UNUSED: Deleted type q_cs_volumeValue.--> |
---|
1274 | <xsd:complexType name="q_cs_wellContext"> |
---|
1275 | <xsd:annotation> |
---|
1276 | <xsd:documentation>Within the context of a WITSML Server, this data should duplicate the equivalent information in the well object.</xsd:documentation> |
---|
1277 | </xsd:annotation> |
---|
1278 | <xsd:sequence> |
---|
1279 | <xsd:element name="field" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="1"> |
---|
1280 | <xsd:annotation> |
---|
1281 | <xsd:documentation>Name of the field in which the well is located.</xsd:documentation> |
---|
1282 | </xsd:annotation> |
---|
1283 | </xsd:element> |
---|
1284 | <xsd:element name="wellAlias" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
1285 | <xsd:annotation> |
---|
1286 | <xsd:documentation>An alias name associated with the well. If the wellName is associated with a naming system then it should be included in this |
---|
1287 | list.</xsd:documentation> |
---|
1288 | </xsd:annotation> |
---|
1289 | </xsd:element> |
---|
1290 | <xsd:element name="wellDatum" type="witsml:q_cs_wellDatum" minOccurs="0" maxOccurs="unbounded"> |
---|
1291 | <xsd:annotation> |
---|
1292 | <xsd:documentation>A datum to which elevations and depths are referenced.</xsd:documentation> |
---|
1293 | </xsd:annotation> |
---|
1294 | </xsd:element> |
---|
1295 | </xsd:sequence> |
---|
1296 | </xsd:complexType> |
---|
1297 | <xsd:complexType name="q_cs_wellDatum"> |
---|
1298 | <xsd:annotation> |
---|
1299 | <xsd:documentation>Defines the datums associated with elevation, vertical depth and measured depth coordinates within the context of a well.</xsd:documentation> |
---|
1300 | </xsd:annotation> |
---|
1301 | <xsd:sequence> |
---|
1302 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1303 | <xsd:annotation> |
---|
1304 | <xsd:documentation>The human understandable contextual name of the reference datum.</xsd:documentation> |
---|
1305 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1306 | </xsd:annotation> |
---|
1307 | </xsd:element> |
---|
1308 | <xsd:element name="code" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1309 | <xsd:annotation> |
---|
1310 | <xsd:documentation>The code value that represents the type of reference datum. This may represent a point on a device (e.g., kelly bushing) or it may represent a |
---|
1311 | vertical reference datum (e.g., mean sea level).</xsd:documentation> |
---|
1312 | <xsd:appinfo> |
---|
1313 | constraints:@type="witsml:q_ElevCodeEnum",xsd:enumeration="CF",xsd:enumeration="CV",xsd:enumeration="DF",xsd:enumeration="GL",xsd:enumeration="KB",xsd:enumeration="RB",xsd:enumeration="RT",xsd:enumeration="SF",xsd:enumeration="LAT",xsd:enumeration="SL",xsd:enumeration="MHHW",xsd:enumeration="MHW",xsd:enumeration="MLLW",xsd:enumeration="MLW",xsd:enumeration="MTL",xsd:enumeration="KO",xsd:enumeration="unknown",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1314 | </xsd:annotation> |
---|
1315 | </xsd:element> |
---|
1316 | <xsd:element name="datumName" type="witsml:q_wellKnownNameStruct" minOccurs="0" maxOccurs="1"> |
---|
1317 | <xsd:annotation> |
---|
1318 | <xsd:documentation>The name of the vertical reference datum in a particular naming system. This should only be specified if the above 'code' represents some |
---|
1319 | variation of sea level. An optional short name (code) can also be specified. Specifying a well known datum is highly desired if the above code is a variant of sea |
---|
1320 | level because sea level varies over time and space. An example would be to specify a name of 'Caspian Sea' with a code of '5106' in the 'EPSG' naming |
---|
1321 | system.</xsd:documentation> |
---|
1322 | </xsd:annotation> |
---|
1323 | </xsd:element> |
---|
1324 | <xsd:element name="kind" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
1325 | <xsd:annotation> |
---|
1326 | <xsd:documentation>Since various activities may use different points as measurement datums, it is useful to characterize the point based on its usage. A well |
---|
1327 | reference datum may have more than one such characterization. For example, it may be the datum used by the driller and logger for measuring their depths. Example |
---|
1328 | usage values would be 'permanent','driller', 'logger' 'WRP' (well reference point) and 'SRP' (site reference point).</xsd:documentation> |
---|
1329 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1330 | </xsd:annotation> |
---|
1331 | </xsd:element> |
---|
1332 | <xsd:element name="wellbore" type="witsml:q_cs_refWellWellbore" minOccurs="0" maxOccurs="1"> |
---|
1333 | <xsd:annotation> |
---|
1334 | <xsd:documentation>A pointer to the wellbore that contains the reference datum. This should be specified if a measured depth is given.</xsd:documentation> |
---|
1335 | </xsd:annotation> |
---|
1336 | </xsd:element> |
---|
1337 | <xsd:element name="rig" type="witsml:q_cs_refWellWellboreRig" minOccurs="0" maxOccurs="1"> |
---|
1338 | <xsd:annotation> |
---|
1339 | <xsd:documentation>A pointer to the rig that contains the device used as a reference datum. The rig may be associated with a wellbore in another well (e.g., pattern |
---|
1340 | drilling using a rig on a track).</xsd:documentation> |
---|
1341 | </xsd:annotation> |
---|
1342 | </xsd:element> |
---|
1343 | <xsd:element name="elevation" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
1344 | <xsd:annotation> |
---|
1345 | <xsd:documentation>The gravity based elevation coordinate of this reference datum as measured from another datum. Positive moving upward from the elevation datum. |
---|
1346 | An elevation should be given unless this is a vertical reference datum (e.g., sea level).</xsd:documentation> |
---|
1347 | <xsd:appinfo>constraints:@type="witsml:q_wellElevationCoord"</xsd:appinfo> |
---|
1348 | </xsd:annotation> |
---|
1349 | </xsd:element> |
---|
1350 | <xsd:element name="measuredDepth" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
1351 | <xsd:annotation> |
---|
1352 | <xsd:documentation>The measured depth coordinate of this reference datum as measured from another datum. The measured depth datum should either be the same as the |
---|
1353 | elevation datum or it should be relatable to the elevation datum through other datums. Positive moving toward the bottomhole from the measured depth datum. This |
---|
1354 | should be given when a local reference is "downhole", such as a kickoff point or ocean bottom template, and the borehole may not be vertical. If a Depth is given |
---|
1355 | then an Elevation should also be given.</xsd:documentation> |
---|
1356 | <xsd:appinfo>constraints:@type="witsml:q_measuredDepthCoord"</xsd:appinfo> |
---|
1357 | </xsd:annotation> |
---|
1358 | </xsd:element> |
---|
1359 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1360 | <xsd:annotation> |
---|
1361 | <xsd:documentation>A contextual description of the well reference datum.</xsd:documentation> |
---|
1362 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1363 | </xsd:annotation> |
---|
1364 | </xsd:element> |
---|
1365 | </xsd:sequence> |
---|
1366 | <xsd:attribute name="defaultMeasuredDepth" type="xsd:string" use="optional"> |
---|
1367 | <xsd:annotation> |
---|
1368 | <xsd:documentation>True indicates that this is the default reference datum for measured depth coordinates. False or not given indicates that this is not the default |
---|
1369 | reference datum. Measured depth coordinates that do not specify a datum reference should be assumed to be measured relative to this default reference datum. Only one |
---|
1370 | reference datum may be designated as the default measured depth datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
1371 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
1372 | </xsd:annotation> |
---|
1373 | </xsd:attribute> |
---|
1374 | <xsd:attribute name="defaultVerticalDepth" type="xsd:string" use="optional"> |
---|
1375 | <xsd:annotation> |
---|
1376 | <xsd:documentation>True indicates that this is the default reference datum for vertical depth coordinates. False or not given indicates that this is not the default |
---|
1377 | reference datum. Vertical depth coordinates that do not specify a datum reference should be assumed to be measured relative to the default reference datum. Only one |
---|
1378 | reference datum may be designated as the default vertical depth datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
1379 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
1380 | </xsd:annotation> |
---|
1381 | </xsd:attribute> |
---|
1382 | <xsd:attribute name="defaultElevation" type="xsd:string" use="optional"> |
---|
1383 | <xsd:annotation> |
---|
1384 | <xsd:documentation>True indicates that this is the default reference datum for elevation coordinates. False or not given indicates that this is not the default |
---|
1385 | reference datum. Elevation coordinates that do not specify a datum reference should be assumed to be measured relative to the default reference datum. Only one |
---|
1386 | reference datum may be designated as the default elevation datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
1387 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
1388 | </xsd:annotation> |
---|
1389 | </xsd:attribute> |
---|
1390 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
1391 | <xsd:annotation> |
---|
1392 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
1393 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
1394 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
1395 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1396 | </xsd:annotation> |
---|
1397 | </xsd:attribute> |
---|
1398 | </xsd:complexType> |
---|
1399 | <!--UNUSED: Deleted type cs_wellTestBottomholeData.--> |
---|
1400 | <!--UNUSED: Deleted type cs_wellTestCumulative.--> |
---|
1401 | <!--UNUSED: Deleted type cs_wellTestFluidLevelTest.--> |
---|
1402 | <!--UNUSED: Deleted type cs_wellTestFluidRate.--> |
---|
1403 | <!--UNUSED: Deleted type cs_wellTestInjectionTestData.--> |
---|
1404 | <!--UNUSED: Deleted type cs_wellTestInjectionTestResults.--> |
---|
1405 | <!--UNUSED: Deleted type cs_wellTestInterval.--> |
---|
1406 | <!--UNUSED: Deleted type cs_wellTestPointData.--> |
---|
1407 | <!--UNUSED: Deleted type cs_wellTestProductionTestData.--> |
---|
1408 | <!--UNUSED: Deleted type cs_wellTestProductionTestResults.--> |
---|
1409 | <!--UNUSED: Deleted type cs_wellTestSeparatorData.--> |
---|
1410 | <!--UNUSED: Deleted type cs_wellTestTestVolume.--> |
---|
1411 | <!--UNUSED: Deleted type cs_wellTestWellheadData.--> |
---|
1412 | <!--UNUSED: Deleted type grp_commonPropertiesProductVolume.--> |
---|
1413 | <!--UNUSED: Deleted type grp_dtsMeasurement.--> |
---|
1414 | <!--UNUSED: Deleted type grp_fluidAnalysis.--> |
---|
1415 | <!--UNUSED: Deleted type grp_fluidAnalysisResult.--> |
---|
1416 | <!--UNUSED: Deleted type grp_fluidResultCommonTestGroup.--> |
---|
1417 | <!--UNUSED: Deleted type grp_fluidSample.--> |
---|
1418 | <!--UNUSED: Deleted type grp_productFlowModel.--> |
---|
1419 | <!--UNUSED: Deleted type grp_productionOperation.--> |
---|
1420 | <!--UNUSED: Deleted type grp_productVolume.--> |
---|
1421 | <!--UNUSED: Deleted type grp_wellTest.--> |
---|
1422 | <xsd:element name="dtsInstalledSystemQuerySet" type="witsml:q_obj_dtsInstalledSystems"> |
---|
1423 | <xsd:annotation> |
---|
1424 | <xsd:documentation>The WITSML API mandated plural root element which allows multiple singular objects to be sent. The plural name is formed by adding an "s" to the |
---|
1425 | singular name.</xsd:documentation> |
---|
1426 | </xsd:annotation> |
---|
1427 | </xsd:element> |
---|
1428 | <xsd:complexType name="q_obj_dtsInstalledSystems"> |
---|
1429 | <xsd:sequence> |
---|
1430 | <xsd:element name="documentInfo" type="witsml:q_cs_documentInfo" minOccurs="0" maxOccurs="1"> |
---|
1431 | <xsd:annotation> |
---|
1432 | <xsd:documentation>Information about the XML message instance.</xsd:documentation> |
---|
1433 | </xsd:annotation> |
---|
1434 | </xsd:element> |
---|
1435 | <xsd:element name="dtsInstalledSystem" type="witsml:q_obj_dtsInstalledSystem" minOccurs="0" maxOccurs="unbounded"> |
---|
1436 | <xsd:annotation> |
---|
1437 | <xsd:documentation>Main wrapper for all the distributed temperature survey information about the installed system. Note that this can serve as a standalone object |
---|
1438 | for messages that are not part of the WITSML server architecture.</xsd:documentation> |
---|
1439 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
1440 | </xsd:annotation> |
---|
1441 | </xsd:element> |
---|
1442 | </xsd:sequence> |
---|
1443 | <xsd:attribute name="version" type="xsd:string" use="optional"> |
---|
1444 | <xsd:annotation> |
---|
1445 | <xsd:documentation>Data object schema version. The fourth level must match the version of the schema constraints (enumerations and XML loader files) that are assumed |
---|
1446 | by the document instance.</xsd:documentation> |
---|
1447 | <xsd:appinfo> |
---|
1448 | constraints:@use="required",@type="witsml:q_schemaVersionString",xsd:maxLength="16",xsd:pattern="1\.0\.0\.[1-9]?[0-9]\(PRODML\)",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1449 | </xsd:annotation> |
---|
1450 | </xsd:attribute> |
---|
1451 | </xsd:complexType> |
---|
1452 | <xsd:complexType name="q_obj_dtsInstalledSystem"> |
---|
1453 | <xsd:complexContent> |
---|
1454 | <xsd:extension base="witsml:q_abstractSingularDataObject"> |
---|
1455 | <xsd:sequence> |
---|
1456 | <xsd:element name="nameWell" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1457 | <xsd:annotation> |
---|
1458 | <xsd:documentation>Human recognizable context for the well that contains the wellbore.</xsd:documentation> |
---|
1459 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1460 | </xsd:annotation> |
---|
1461 | </xsd:element> |
---|
1462 | <xsd:element name="nameWellbore" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1463 | <xsd:annotation> |
---|
1464 | <xsd:documentation>Human recognizable context for the wellbore that contains the installed system.</xsd:documentation> |
---|
1465 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1466 | </xsd:annotation> |
---|
1467 | </xsd:element> |
---|
1468 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1469 | <xsd:annotation> |
---|
1470 | <xsd:documentation>Human recognizable context for the dts.</xsd:documentation> |
---|
1471 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1472 | </xsd:annotation> |
---|
1473 | </xsd:element> |
---|
1474 | <xsd:element name="dateMin" type="witsml:q_endpointQualifiedDate" minOccurs="0" maxOccurs="1"> |
---|
1475 | <xsd:annotation> |
---|
1476 | <xsd:documentation>The minimum date index contained within the object. The minimum and maximum indexes are server query parameters and will be populated with |
---|
1477 | valid values in a "get" result. That is, all measurements for a well in the specified period defined by the min/max. See the WITSML API Specification appendix |
---|
1478 | on "Special Handling" of growing objects for a description of the behavior related to this parameter.</xsd:documentation> |
---|
1479 | </xsd:annotation> |
---|
1480 | </xsd:element> |
---|
1481 | <xsd:element name="dateMax" type="witsml:q_endpointQualifiedDate" minOccurs="0" maxOccurs="1"> |
---|
1482 | <xsd:annotation> |
---|
1483 | <xsd:documentation>The maximum date index contained within the object. The minimum and maximum indexes are server query parameters and will be populated with |
---|
1484 | valid values in a "get" result. See the WITSML API Specification appendix on "Special Handling" of growing objects for a description of the behavior related |
---|
1485 | to this parameter.</xsd:documentation> |
---|
1486 | </xsd:annotation> |
---|
1487 | </xsd:element> |
---|
1488 | <xsd:element name="dateCurrent" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1489 | <xsd:annotation> |
---|
1490 | <xsd:documentation>The definition of the "current date" index for this object. The current date index is a server query parameter which requests the selection |
---|
1491 | of a single node from a recurring set (e.g., the data related to one point in a date series). That is, the "most recent" (at or before the specified date) |
---|
1492 | installation for a well. See the WITSML API Specification appendix on "Special Handling" of growing objects for a description of the behavior related to this |
---|
1493 | parameter.</xsd:documentation> |
---|
1494 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
1495 | </xsd:annotation> |
---|
1496 | </xsd:element> |
---|
1497 | <xsd:element name="wellContext" type="witsml:q_cs_wellContext" minOccurs="0" maxOccurs="1"> |
---|
1498 | <xsd:annotation> |
---|
1499 | <xsd:documentation>Contextual data about the well in which the system was installed.</xsd:documentation> |
---|
1500 | </xsd:annotation> |
---|
1501 | </xsd:element> |
---|
1502 | <xsd:element name="isPlanned" type="witsml:q_booleanTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1503 | <xsd:annotation> |
---|
1504 | <xsd:documentation>Is this a planned installation in a well, or has the installation already occurred. Note that the default value is 'false', which states |
---|
1505 | that this is an actual installation.</xsd:documentation> |
---|
1506 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
1507 | </xsd:annotation> |
---|
1508 | </xsd:element> |
---|
1509 | <xsd:element name="fiberInformation" type="witsml:q_cs_dtsFiberInformation" minOccurs="0" maxOccurs="1"> |
---|
1510 | <xsd:annotation> |
---|
1511 | <xsd:documentation>Information about the fiber used, and its installation.</xsd:documentation> |
---|
1512 | </xsd:annotation> |
---|
1513 | </xsd:element> |
---|
1514 | <xsd:element name="instrumentBoxInformation" type="witsml:q_cs_dtsBoxInformation" minOccurs="0" maxOccurs="1"> |
---|
1515 | <xsd:annotation> |
---|
1516 | <xsd:documentation>Information about the instrument box used, and its installation.</xsd:documentation> |
---|
1517 | </xsd:annotation> |
---|
1518 | </xsd:element> |
---|
1519 | <xsd:element name="fiberConfiguration" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
1520 | <xsd:annotation> |
---|
1521 | <xsd:documentation>The configuration of the fiber installation. Example values would be linear, linear with gauge, J, U.</xsd:documentation> |
---|
1522 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1523 | </xsd:annotation> |
---|
1524 | </xsd:element> |
---|
1525 | <xsd:element name="fiberEndPoint" type="witsml:q_cs_dtsFiberEndPoint" minOccurs="0" maxOccurs="unbounded"> |
---|
1526 | <xsd:annotation> |
---|
1527 | <xsd:documentation>A fiber installed with a "U" configuration will have two ends available for hookup to an instrument box. In order to record which end is |
---|
1528 | cabled to the instrument box on a particular measurement run, it is necessary to identify the two ends. This complex type allows a name and description for |
---|
1529 | each end, so that it may be identified in a later use. This may also be useful when multiple fibers in multiple wellbores converge at the same |
---|
1530 | wellhead.</xsd:documentation> |
---|
1531 | </xsd:annotation> |
---|
1532 | </xsd:element> |
---|
1533 | <xsd:element name="fiberLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
1534 | <xsd:annotation> |
---|
1535 | <xsd:documentation>The length of the fiber installed in the wellbore.</xsd:documentation> |
---|
1536 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
1537 | </xsd:annotation> |
---|
1538 | </xsd:element> |
---|
1539 | <xsd:element name="wellboreFiberSchematic" type="witsml:q_cs_dtsFiberInstalledPoints" minOccurs="0" maxOccurs="1"> |
---|
1540 | <xsd:annotation> |
---|
1541 | <xsd:documentation>A table of values along the length along the fiber.</xsd:documentation> |
---|
1542 | </xsd:annotation> |
---|
1543 | </xsd:element> |
---|
1544 | <xsd:element name="opticalBudget" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
1545 | <xsd:annotation> |
---|
1546 | <xsd:documentation>Total light budget available for the installation. This is generally measured in decibels, and indicates the total power loss for two-way |
---|
1547 | travel of the light in the installed fiber.</xsd:documentation> |
---|
1548 | <xsd:appinfo>constraints:@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
1549 | </xsd:annotation> |
---|
1550 | </xsd:element> |
---|
1551 | <xsd:element name="pumpActivity" type="witsml:q_cs_dtsPumpActivity" minOccurs="0" maxOccurs="1"> |
---|
1552 | <xsd:annotation> |
---|
1553 | <xsd:documentation>The activity of pumping the fiber downhole</xsd:documentation> |
---|
1554 | </xsd:annotation> |
---|
1555 | </xsd:element> |
---|
1556 | <xsd:element name="otdrInstallationTest" type="witsml:q_cs_dtsOtdr" minOccurs="0" maxOccurs="unbounded"> |
---|
1557 | <xsd:annotation> |
---|
1558 | <xsd:documentation>This captures the data from the pre-installation and post-installation OTDR tests run on the fiber. A standard quality control program |
---|
1559 | would include these two, but the schema allows for more than two if additional runs associated with the installation of the fiber are performed. OTDR runs |
---|
1560 | associated with a measurement are given as a child of the measurementInformation element.</xsd:documentation> |
---|
1561 | </xsd:annotation> |
---|
1562 | </xsd:element> |
---|
1563 | <xsd:element name="installationCalibration" type="witsml:q_cs_dtsCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
1564 | <xsd:annotation> |
---|
1565 | <xsd:documentation>Any calibration other than the ones explicitly given may be recorded here. This is a general calibration type, which is populated with |
---|
1566 | name/value pairs.</xsd:documentation> |
---|
1567 | </xsd:annotation> |
---|
1568 | </xsd:element> |
---|
1569 | <xsd:element name="basedOnInstalledFiber" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
1570 | <xsd:annotation> |
---|
1571 | <xsd:documentation>If an instrument box is changed, for example, but the fiber remains the same, this instance of installed fiber is given to record that |
---|
1572 | change. This element refers to a previous installed fiber, on which this one is based. For example, the wellboreFiberSchematic is unchanged, and may be |
---|
1573 | obtained from the previous instance of installed fiber that is referenced here.</xsd:documentation> |
---|
1574 | </xsd:annotation> |
---|
1575 | </xsd:element> |
---|
1576 | <xsd:element name="commonData" type="witsml:q_cs_commonData" minOccurs="0" maxOccurs="1"> |
---|
1577 | <xsd:annotation> |
---|
1578 | <xsd:documentation>A container element that contains elements that are common to all data objects.</xsd:documentation> |
---|
1579 | </xsd:annotation> |
---|
1580 | </xsd:element> |
---|
1581 | <xsd:element name="customData" type="witsml:q_cs_customData" minOccurs="0" maxOccurs="1"> |
---|
1582 | <xsd:annotation> |
---|
1583 | <xsd:documentation>A container element that can contain custom or user defined data elements.</xsd:documentation> |
---|
1584 | </xsd:annotation> |
---|
1585 | </xsd:element> |
---|
1586 | </xsd:sequence> |
---|
1587 | <xsd:attribute name="uidWell" type="xsd:string" use="optional"> |
---|
1588 | <xsd:annotation> |
---|
1589 | <xsd:documentation>Unique identifier for the well. This uniquely represents the well referenced by the (possibly non-unique) nameWell.</xsd:documentation> |
---|
1590 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1591 | </xsd:annotation> |
---|
1592 | </xsd:attribute> |
---|
1593 | <xsd:attribute name="uidWellbore" type="xsd:string" use="optional"> |
---|
1594 | <xsd:annotation> |
---|
1595 | <xsd:documentation>Unique identifier for the wellbore. This uniquely represents the wellbore referenced by the (possibly non-unique) |
---|
1596 | nameWellbore.</xsd:documentation> |
---|
1597 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1598 | </xsd:annotation> |
---|
1599 | </xsd:attribute> |
---|
1600 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
1601 | <xsd:annotation> |
---|
1602 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
1603 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is |
---|
1604 | only required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
1605 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1606 | </xsd:annotation> |
---|
1607 | </xsd:attribute> |
---|
1608 | </xsd:extension> |
---|
1609 | </xsd:complexContent> |
---|
1610 | </xsd:complexType> |
---|
1611 | <!--UNUSED: Deleted type q_abstractBoolean.--> |
---|
1612 | <!--UNUSED: Deleted type q_abstractDateTime.--> |
---|
1613 | <!--UNUSED: Deleted type q_abstractDate.--> |
---|
1614 | <!--UNUSED: Deleted type abstractYear.--> |
---|
1615 | <!--UNUSED: Deleted type q_abstractDouble.--> |
---|
1616 | <!--UNUSED: Deleted type q_abstractShort.--> |
---|
1617 | <!--UNUSED: Deleted type abstractInt.--> |
---|
1618 | <!--UNUSED: Deleted type q_abstractString.--> |
---|
1619 | <!--UNUSED: Deleted type q_abstractMeasure.--> |
---|
1620 | <!--UNUSED: Deleted type q_abstractMaximumLengthString.--> |
---|
1621 | <!--UNUSED: Deleted type abstractUncollapsedString.--> |
---|
1622 | <!--UNUSED: Deleted type abstractContextualObject.--> |
---|
1623 | <xsd:complexType name="q_abstractSingularDataObject"> |
---|
1624 | <xsd:annotation> |
---|
1625 | <xsd:documentation>The intended abstract supertype of all singular data objects.</xsd:documentation> |
---|
1626 | </xsd:annotation> |
---|
1627 | <xsd:sequence /> |
---|
1628 | </xsd:complexType> |
---|
1629 | <!--UNUSED: Deleted type q_abstractPositiveCount.--> |
---|
1630 | <!--UNUSED: Deleted type q_abstractNameString.--> |
---|
1631 | <!--UNUSED: Deleted type q_abstractUidString.--> |
---|
1632 | <!--UNUSED: Deleted type q_abstractCommentString.--> |
---|
1633 | <!--UNUSED: Deleted type q_abstractTypeEnum.--> |
---|
1634 | <!--UNUSED: Deleted type q_abstractUomEnum.--> |
---|
1635 | <!--UNUSED: Deleted type abstractNonNegativeCount.--> |
---|
1636 | <!--UNUSED: Deleted type ActivityClassType.--> |
---|
1637 | <!--UNUSED: Deleted type ActivityCode.--> |
---|
1638 | <!--UNUSED: Deleted type AddressKindEnum.--> |
---|
1639 | <!--UNUSED: Deleted type AddressQualifier.--> |
---|
1640 | <!--UNUSED: Deleted type AziRef.--> |
---|
1641 | <!--UNUSED: Deleted type ArrayElementDataType.--> |
---|
1642 | <!--UNUSED: Deleted type BearingType.--> |
---|
1643 | <!--UNUSED: Deleted type BitDullCode.--> |
---|
1644 | <!--UNUSED: Deleted type BitReasonPulled.--> |
---|
1645 | <!--UNUSED: Deleted type BitType.--> |
---|
1646 | <!--UNUSED: Deleted type BhaStatus.--> |
---|
1647 | <!--UNUSED: Deleted type BladeShapeType.--> |
---|
1648 | <!--UNUSED: Deleted type BladeType.--> |
---|
1649 | <!--UNUSED: Deleted type BopType.--> |
---|
1650 | <!--UNUSED: Deleted type BoxPinConfig.--> |
---|
1651 | <!--UNUSED: Deleted type CalculationMethod.--> |
---|
1652 | <!--UNUSED: Deleted type CementJobType.--> |
---|
1653 | <!--UNUSED: Deleted type ConnectionPosition.--> |
---|
1654 | <!--UNUSED: Deleted type ContactPreference.--> |
---|
1655 | <!--UNUSED: Deleted type DeflectionMethod.--> |
---|
1656 | <!--UNUSED: Deleted type DerrickType.--> |
---|
1657 | <!--UNUSED: Deleted type DrawWorksType.--> |
---|
1658 | <!--UNUSED: Deleted type DriveType.--> |
---|
1659 | <!--UNUSED: Deleted type q_ElevCodeEnum.--> |
---|
1660 | <!--UNUSED: Deleted type Ellipsoid.--> |
---|
1661 | <!--UNUSED: Deleted type q_EndpointQualifier.--> |
---|
1662 | <!--UNUSED: Deleted type FacilityParameter.--> |
---|
1663 | <!--UNUSED: Deleted type q_FiberMode.--> |
---|
1664 | <!--UNUSED: Deleted type FlowQualifier.--> |
---|
1665 | <!--UNUSED: Deleted type FlowSubQualifier.--> |
---|
1666 | <!--UNUSED: Deleted type GasPeakType.--> |
---|
1667 | <!--UNUSED: Deleted type GeodeticDatum.--> |
---|
1668 | <!--UNUSED: Deleted type Hemispheres.--> |
---|
1669 | <!--UNUSED: Deleted type HoleCasingType.--> |
---|
1670 | <!--UNUSED: Deleted type HoleOpenerType.--> |
---|
1671 | <!--UNUSED: Deleted type InjectionFluid.--> |
---|
1672 | <!--UNUSED: Deleted type IntervalMethod.--> |
---|
1673 | <!--UNUSED: Deleted type IntervalType.--> |
---|
1674 | <!--UNUSED: Deleted type q_ItemState.--> |
---|
1675 | <!--UNUSED: Deleted type q_InstalledFiberPoint.--> |
---|
1676 | <!--UNUSED: Deleted type JarType.--> |
---|
1677 | <!--UNUSED: Deleted type JarAction.--> |
---|
1678 | <!--UNUSED: Deleted type LithologySource.--> |
---|
1679 | <!--UNUSED: Deleted type LithologyType.--> |
---|
1680 | <!--UNUSED: Deleted type LogDataType.--> |
---|
1681 | <!--UNUSED: Deleted type LogIndexDirection.--> |
---|
1682 | <!--UNUSED: Deleted type LogIndexType.--> |
---|
1683 | <!--UNUSED: Deleted type LogTraceOrigin.--> |
---|
1684 | <!--UNUSED: Deleted type LogTraceState.--> |
---|
1685 | <!--UNUSED: Deleted type MaterialType.--> |
---|
1686 | <!--UNUSED: Deleted type MeasureClass.--> |
---|
1687 | <!--UNUSED: Deleted type MeasurementType.--> |
---|
1688 | <!--UNUSED: Deleted type MessageProbability.--> |
---|
1689 | <!--UNUSED: Deleted type MessageSeverity.--> |
---|
1690 | <!--UNUSED: Deleted type MessageType.--> |
---|
1691 | <!--UNUSED: Deleted type MudLogParameterType.--> |
---|
1692 | <!--UNUSED: Deleted type NADTypes.--> |
---|
1693 | <!--UNUSED: Deleted type q_NameTagLocation.--> |
---|
1694 | <!--UNUSED: Deleted type q_NameTagNumberingScheme.--> |
---|
1695 | <!--UNUSED: Deleted type q_NameTagTechnology.--> |
---|
1696 | <!--UNUSED: Deleted type NozzleType.--> |
---|
1697 | <!--UNUSED: Deleted type q_OTDRReason.--> |
---|
1698 | <!--UNUSED: Deleted type PhoneType.--> |
---|
1699 | <!--UNUSED: Deleted type PitType.--> |
---|
1700 | <!--UNUSED: Deleted type ProductFlowPortType.--> |
---|
1701 | <!--UNUSED: Deleted type Projection.--> |
---|
1702 | <!--UNUSED: Deleted type ProjectionVariantsObliqueMercator.--> |
---|
1703 | <!--UNUSED: Deleted type PumpType.--> |
---|
1704 | <!--UNUSED: Deleted type PumpOpType.--> |
---|
1705 | <!--UNUSED: Deleted type QualifierType.--> |
---|
1706 | <!--UNUSED: Deleted type RealtimeData.--> |
---|
1707 | <!--UNUSED: Deleted type ReportingFacility.--> |
---|
1708 | <!--UNUSED: Deleted type ReportingFlow.--> |
---|
1709 | <!--UNUSED: Deleted type ReportingPeriod.--> |
---|
1710 | <!--UNUSED: Deleted type ReportingProduct.--> |
---|
1711 | <!--UNUSED: Deleted type ReportingProperty.--> |
---|
1712 | <!--UNUSED: Deleted type RigType.--> |
---|
1713 | <!--UNUSED: Deleted type RiskAffectedPersonnel.--> |
---|
1714 | <!--UNUSED: Deleted type RiskCategory.--> |
---|
1715 | <!--UNUSED: Deleted type RiskSubCategory.--> |
---|
1716 | <!--UNUSED: Deleted type RiskType.--> |
---|
1717 | <!--UNUSED: Deleted type ScrType.--> |
---|
1718 | <!--UNUSED: Deleted type ShowFluorescence.--> |
---|
1719 | <!--UNUSED: Deleted type ShowLevel.--> |
---|
1720 | <!--UNUSED: Deleted type ShowRating.--> |
---|
1721 | <!--UNUSED: Deleted type ShowSpeed.--> |
---|
1722 | <!--UNUSED: Deleted type StandardTempPress.--> |
---|
1723 | <!--UNUSED: Deleted type SupportCraft.--> |
---|
1724 | <!--UNUSED: Deleted type SurfEquipType.--> |
---|
1725 | <!--UNUSED: Deleted type TargetCategory.--> |
---|
1726 | <!--UNUSED: Deleted type TargetScope.--> |
---|
1727 | <!--UNUSED: Deleted type TargetSectionScope.--> |
---|
1728 | <!--UNUSED: Deleted type TestReason.--> |
---|
1729 | <!--UNUSED: Deleted type TrajStationStatus.--> |
---|
1730 | <!--UNUSED: Deleted type TrajStationType.--> |
---|
1731 | <!--UNUSED: Deleted type TubularAssembly.--> |
---|
1732 | <!--UNUSED: Deleted type TubularComponent.--> |
---|
1733 | <!--UNUSED: Deleted type TypeSurveyTool.--> |
---|
1734 | <!--UNUSED: Deleted type q_ValueStatus.--> |
---|
1735 | <!--UNUSED: Deleted type WellDirection.--> |
---|
1736 | <!--UNUSED: Deleted type WellFluid.--> |
---|
1737 | <!--UNUSED: Deleted type WellboreShape.--> |
---|
1738 | <!--UNUSED: Deleted type WellboreType.--> |
---|
1739 | <!--UNUSED: Deleted type WellPurpose.--> |
---|
1740 | <!--UNUSED: Deleted type WellStatus.--> |
---|
1741 | <!--UNUSED: Deleted type CrewType.--> |
---|
1742 | <!--UNUSED: Deleted type OperationKind.--> |
---|
1743 | <!--UNUSED: Deleted type ReasonLost.--> |
---|
1744 | <!--UNUSED: Deleted type SafetyType.--> |
---|
1745 | <!--UNUSED: Deleted type VolumeReferenceKind.--> |
---|
1746 | <!--UNUSED: Deleted type DataQuality.--> |
---|
1747 | <!--UNUSED: Deleted type FluidAnalysisKind.--> |
---|
1748 | <!--UNUSED: Deleted type FluidComponent.--> |
---|
1749 | <!--UNUSED: Deleted type FluidSampleTestAcquisition.--> |
---|
1750 | <!--UNUSED: Deleted type FluidComponentKind.--> |
---|
1751 | <!--UNUSED: Deleted type FluidContaminant.--> |
---|
1752 | <!--UNUSED: Deleted type FluidSampleKind.--> |
---|
1753 | <!--UNUSED: Deleted type ReservoirFluidKind.--> |
---|
1754 | <!--UNUSED: Deleted type EosModelKind.--> |
---|
1755 | <!--UNUSED: Deleted type q_generalMeasureType.--> |
---|
1756 | <!--UNUSED: Deleted type q_temperatureSlopeMeasure.--> |
---|
1757 | <xsd:complexType name="q_typeOptionalClassString"> |
---|
1758 | <xsd:annotation> |
---|
1759 | <xsd:documentation>A type with a classType attribute. This allows a user to give a classification of something, and to specify the type of classification that it is. |
---|
1760 | There is no control over the class values, or the class types.</xsd:documentation> |
---|
1761 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1762 | </xsd:annotation> |
---|
1763 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
1764 | <xsd:annotation> |
---|
1765 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1766 | </xsd:annotation> |
---|
1767 | </xsd:attribute> |
---|
1768 | <xsd:attribute name="classType" type="xsd:string" use="optional"> |
---|
1769 | <xsd:annotation> |
---|
1770 | <xsd:documentation>This identifies the classification system to which the class belongs.</xsd:documentation> |
---|
1771 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1772 | </xsd:annotation> |
---|
1773 | </xsd:attribute> |
---|
1774 | </xsd:complexType> |
---|
1775 | <xsd:complexType name="q_endpointQualifiedDateTime"> |
---|
1776 | <xsd:annotation> |
---|
1777 | <xsd:documentation>A timestamp value used for min/max query parameters related to "growing objects". The meaning of the endpoint of an interval can be modified by the |
---|
1778 | endpoint attribute.</xsd:documentation> |
---|
1779 | <xsd:appinfo>constraints:@base="witsml:abstractDateTime",xsd:pattern=".+"</xsd:appinfo> |
---|
1780 | </xsd:annotation> |
---|
1781 | <xsd:attribute name="queryValue" type="xsd:dateTime"> |
---|
1782 | <xsd:annotation> |
---|
1783 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1784 | </xsd:annotation> |
---|
1785 | </xsd:attribute> |
---|
1786 | <xsd:attribute name="endpoint" type="xsd:string" use="optional"> |
---|
1787 | <xsd:annotation> |
---|
1788 | <xsd:documentation>The default is "inclusive".</xsd:documentation> |
---|
1789 | <xsd:appinfo>constraints:@type="witsml:q_EndpointQualifier",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1790 | </xsd:annotation> |
---|
1791 | </xsd:attribute> |
---|
1792 | </xsd:complexType> |
---|
1793 | <xsd:complexType name="q_endpointQualifiedDate"> |
---|
1794 | <xsd:annotation> |
---|
1795 | <xsd:documentation>A date value used for min/max query parameters related to "growing objects". The meaning of the endpoint of an interval can be modified by the endpoint |
---|
1796 | attribute.</xsd:documentation> |
---|
1797 | <xsd:appinfo>constraints:@base="witsml:abstractDate",xsd:pattern=".+"</xsd:appinfo> |
---|
1798 | </xsd:annotation> |
---|
1799 | <xsd:attribute name="queryValue" type="xsd:date"> |
---|
1800 | <xsd:annotation> |
---|
1801 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1802 | </xsd:annotation> |
---|
1803 | </xsd:attribute> |
---|
1804 | <xsd:attribute name="endpoint" type="xsd:string" use="optional"> |
---|
1805 | <xsd:annotation> |
---|
1806 | <xsd:documentation>The default is "inclusive".</xsd:documentation> |
---|
1807 | <xsd:appinfo>constraints:@type="witsml:q_EndpointQualifier",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1808 | </xsd:annotation> |
---|
1809 | </xsd:attribute> |
---|
1810 | </xsd:complexType> |
---|
1811 | <!--UNUSED: Deleted type emailQualifierStruct.--> |
---|
1812 | <!--UNUSED: Deleted type facilityIdentifierStruct.--> |
---|
1813 | <!--UNUSED: Deleted type phoneNumberStruct.--> |
---|
1814 | <!--UNUSED: Deleted type q_logicalBoolean.--> |
---|
1815 | <!--UNUSED: Deleted type q_date.--> |
---|
1816 | <!--UNUSED: Deleted type month.--> |
---|
1817 | <!--UNUSED: Deleted type year.--> |
---|
1818 | <!--UNUSED: Deleted type q_timestamp.--> |
---|
1819 | <!--UNUSED: Deleted type timeZone.--> |
---|
1820 | <!--UNUSED: Deleted type calendarYear.--> |
---|
1821 | <!--UNUSED: Deleted type yAxisAzimuth.--> |
---|
1822 | <!--UNUSED: Deleted type nonNegativeFraction.--> |
---|
1823 | <!--UNUSED: Deleted type q_unitlessQuantity.--> |
---|
1824 | <!--UNUSED: Deleted type genericMeasure.--> |
---|
1825 | <!--UNUSED: Deleted type indexCurve.--> |
---|
1826 | <!--UNUSED: Deleted type ratioGenericMeasure.--> |
---|
1827 | <!--UNUSED: Deleted type listOfString.--> |
---|
1828 | <!--UNUSED: Deleted type listOfDouble.--> |
---|
1829 | <xsd:complexType name="q_refNameString"> |
---|
1830 | <xsd:annotation> |
---|
1831 | <xsd:documentation>A reference to a name in another node of the xml hierachy. This value represents a foreign key from one element to another.</xsd:documentation> |
---|
1832 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1833 | </xsd:annotation> |
---|
1834 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
1835 | <xsd:annotation> |
---|
1836 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1837 | </xsd:annotation> |
---|
1838 | </xsd:attribute> |
---|
1839 | <xsd:attribute name="uidRef" type="xsd:string" use="optional"> |
---|
1840 | <xsd:annotation> |
---|
1841 | <xsd:documentation>A reference to the unique identifier (uid attribute) in the node referenced by the name value. This attribute is required within the context of a |
---|
1842 | WITSML server.</xsd:documentation> |
---|
1843 | <xsd:appinfo>constraints:@type="witsml:q_refString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1844 | </xsd:annotation> |
---|
1845 | </xsd:attribute> |
---|
1846 | </xsd:complexType> |
---|
1847 | <!--UNUSED: Deleted type refObjectString.--> |
---|
1848 | <!--UNUSED: Deleted type refPositiveCount.--> |
---|
1849 | <!--UNUSED: Deleted type q_refWellDatum.--> |
---|
1850 | <!--UNUSED: Deleted type q_nameString.--> |
---|
1851 | <!--UNUSED: Deleted type q_commentString.--> |
---|
1852 | <!--UNUSED: Deleted type q_descriptionString.--> |
---|
1853 | <!--UNUSED: Deleted type shortDescriptionString.--> |
---|
1854 | <!--UNUSED: Deleted type encodedArrayString.--> |
---|
1855 | <!--UNUSED: Deleted type encodedValueString.--> |
---|
1856 | <!--UNUSED: Deleted type q_kindString.--> |
---|
1857 | <!--UNUSED: Deleted type q_uomString.--> |
---|
1858 | <!--UNUSED: Deleted type q_uidString.--> |
---|
1859 | <!--UNUSED: Deleted type q_refString.--> |
---|
1860 | <!--UNUSED: Deleted type q_schemaVersionString.--> |
---|
1861 | <xsd:complexType name="q_nameStruct"> |
---|
1862 | <xsd:annotation> |
---|
1863 | <xsd:documentation>The name of something within a naming system.</xsd:documentation> |
---|
1864 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1865 | </xsd:annotation> |
---|
1866 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
1867 | <xsd:annotation> |
---|
1868 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1869 | </xsd:annotation> |
---|
1870 | </xsd:attribute> |
---|
1871 | <xsd:attribute name="namingSystem" type="xsd:string" use="optional"> |
---|
1872 | <xsd:annotation> |
---|
1873 | <xsd:documentation>The naming system within the name is (hopefully) unique.</xsd:documentation> |
---|
1874 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1875 | </xsd:annotation> |
---|
1876 | </xsd:attribute> |
---|
1877 | </xsd:complexType> |
---|
1878 | <xsd:complexType name="q_wellKnownNameStruct"> |
---|
1879 | <xsd:annotation> |
---|
1880 | <xsd:documentation>The name of something within a mandatory naming system with an optional code.</xsd:documentation> |
---|
1881 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1882 | </xsd:annotation> |
---|
1883 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
1884 | <xsd:annotation> |
---|
1885 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1886 | </xsd:annotation> |
---|
1887 | </xsd:attribute> |
---|
1888 | <xsd:attribute name="namingSystem" type="xsd:string" use="optional"> |
---|
1889 | <xsd:annotation> |
---|
1890 | <xsd:documentation>The naming system within the name is unique.</xsd:documentation> |
---|
1891 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1892 | </xsd:annotation> |
---|
1893 | </xsd:attribute> |
---|
1894 | <xsd:attribute name="code" type="xsd:string" use="optional"> |
---|
1895 | <xsd:annotation> |
---|
1896 | <xsd:documentation>A unique (short) code associated with the name.</xsd:documentation> |
---|
1897 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1898 | </xsd:annotation> |
---|
1899 | </xsd:attribute> |
---|
1900 | </xsd:complexType> |
---|
1901 | <!--UNUSED: Deleted type uncollapsedString.--> |
---|
1902 | <!--UNUSED: Deleted type iadcBearingWearCode.--> |
---|
1903 | <!--UNUSED: Deleted type geodeticZoneString.--> |
---|
1904 | <!--UNUSED: Deleted type generalQualifiedMeasure.--> |
---|
1905 | <!--UNUSED: Deleted type integerQualifiedCount.--> |
---|
1906 | <!--UNUSED: Deleted type kindQualifiedString.--> |
---|
1907 | <!--UNUSED: Deleted type areaQualifiedMeasure.--> |
---|
1908 | <!--UNUSED: Deleted type areaPerAreaQualifiedMeasure.--> |
---|
1909 | <!--UNUSED: Deleted type anglePerTimeQualifiedMeasure.--> |
---|
1910 | <!--UNUSED: Deleted type lengthPerLengthQualifiedMeasure.--> |
---|
1911 | <!--UNUSED: Deleted type pressureQualifiedMeasure.--> |
---|
1912 | <!--UNUSED: Deleted type thermodynamicTemperatureQualifiedMeasure.--> |
---|
1913 | <!--UNUSED: Deleted type q_volumeQualifiedMeasure.--> |
---|
1914 | <!--UNUSED: Deleted type q_volumeFlowRateQualifiedMeasure.--> |
---|
1915 | <!--UNUSED: Deleted type q_measuredDepthCoord.--> |
---|
1916 | <!--UNUSED: Deleted type q_MeasuredDepthUom.--> |
---|
1917 | <!--UNUSED: Deleted type wellVerticalDepthCoord.--> |
---|
1918 | <!--UNUSED: Deleted type q_wellElevationCoord.--> |
---|
1919 | <!--UNUSED: Deleted type q_WellVerticalCoordinateUom.--> |
---|
1920 | <!--UNUSED: Deleted type nonNegativeCount.--> |
---|
1921 | <!--UNUSED: Deleted type q_positiveCount.--> |
---|
1922 | <!--UNUSED: Deleted type positiveBigCount.--> |
---|
1923 | <!--UNUSED: Deleted type integerCount.--> |
---|
1924 | <!--UNUSED: Deleted type beaufortScaleIntegerCode.--> |
---|
1925 | <!--UNUSED: Deleted type pumpActionIntegerCode.--> |
---|
1926 | <!--UNUSED: Deleted type iadcIntegerCode.--> |
---|
1927 | <!--UNUSED: Deleted type levelIntegerCode.--> |
---|
1928 | <!--UNUSED: Deleted type cost.--> |
---|
1929 | <xsd:complexType name="q_indexedObject"> |
---|
1930 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
1931 | <xsd:annotation> |
---|
1932 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
1933 | </xsd:annotation> |
---|
1934 | </xsd:attribute> |
---|
1935 | <xsd:attribute name="index" type="xsd:string" use="optional"> |
---|
1936 | <xsd:annotation> |
---|
1937 | <xsd:documentation>Indexes things with the same name. That is the first one, the second one, etc.</xsd:documentation> |
---|
1938 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_positiveCount",xsd:minInclusive="1",xsd:minInclusive="1",xsd:pattern=".+"</xsd:appinfo> |
---|
1939 | </xsd:annotation> |
---|
1940 | </xsd:attribute> |
---|
1941 | <xsd:attribute name="name" type="xsd:string" use="optional"> |
---|
1942 | <xsd:annotation> |
---|
1943 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1944 | </xsd:annotation> |
---|
1945 | </xsd:attribute> |
---|
1946 | <xsd:attribute name="uom" type="xsd:string" use="optional"> |
---|
1947 | <xsd:annotation> |
---|
1948 | <xsd:appinfo>constraints:@type="witsml:q_uomString",xsd:maxLength="24",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1949 | </xsd:annotation> |
---|
1950 | </xsd:attribute> |
---|
1951 | <xsd:attribute name="description" type="xsd:string" use="optional"> |
---|
1952 | <xsd:annotation> |
---|
1953 | <xsd:appinfo>constraints:@type="witsml:q_descriptionString",xsd:maxLength="256",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
1954 | </xsd:annotation> |
---|
1955 | </xsd:attribute> |
---|
1956 | </xsd:complexType> |
---|
1957 | <!--UNUSED: Deleted type str2.--> |
---|
1958 | <!--UNUSED: Deleted type str16.--> |
---|
1959 | <!--UNUSED: Deleted type str32.--> |
---|
1960 | <!--UNUSED: Deleted type crewCount.--> |
---|
1961 | <!--UNUSED: Deleted type lostVolumeAndReason.--> |
---|
1962 | <!--UNUSED: Deleted type safetyCount.--> |
---|
1963 | <!--UNUSED: Deleted type binaryInteractionCoefficient.--> |
---|
1964 | <!--UNUSED: Deleted type q_massConcentrationMeasurePercent.--> |
---|
1965 | <!--UNUSED: Deleted type q_molarFractionMeasurePercent.--> |
---|
1966 | <!--UNUSED: Deleted type volumePerVolumeMeasurePercent.--> |
---|
1967 | <!--UNUSED: Deleted type q_PercentUom.--> |
---|
1968 | <!--UNUSED: Deleted type accelerationLinearMeasure.--> |
---|
1969 | <!--UNUSED: Deleted type q_amountOfSubstanceMeasure.--> |
---|
1970 | <!--UNUSED: Deleted type anglePerLengthMeasure.--> |
---|
1971 | <!--UNUSED: Deleted type anglePerTimeMeasure.--> |
---|
1972 | <!--UNUSED: Deleted type areaMeasure.--> |
---|
1973 | <!--UNUSED: Deleted type areaPerAreaMeasure.--> |
---|
1974 | <!--UNUSED: Deleted type q_densityMeasure.--> |
---|
1975 | <!--UNUSED: Deleted type q_dimensionlessMeasure.--> |
---|
1976 | <!--UNUSED: Deleted type dynamicViscosityMeasure.--> |
---|
1977 | <!--UNUSED: Deleted type electricPotentialMeasure.--> |
---|
1978 | <!--UNUSED: Deleted type energyPerAreaMeasure.--> |
---|
1979 | <!--UNUSED: Deleted type equivalentPerMassMeasure.--> |
---|
1980 | <!--UNUSED: Deleted type forceMeasure.--> |
---|
1981 | <!--UNUSED: Deleted type forcePerVolumeMeasure.--> |
---|
1982 | <!--UNUSED: Deleted type q_frequencyMeasure.--> |
---|
1983 | <!--UNUSED: Deleted type illuminanceMeasure.--> |
---|
1984 | <!--UNUSED: Deleted type q_lengthMeasure.--> |
---|
1985 | <!--UNUSED: Deleted type q_lengthPerLengthMeasure.--> |
---|
1986 | <!--UNUSED: Deleted type magneticFieldStrengthMeasure.--> |
---|
1987 | <!--UNUSED: Deleted type q_massConcentrationMeasure.--> |
---|
1988 | <!--UNUSED: Deleted type q_massFlowRateMeasure.--> |
---|
1989 | <!--UNUSED: Deleted type q_massMeasure.--> |
---|
1990 | <!--UNUSED: Deleted type massPerLengthMeasure.--> |
---|
1991 | <!--UNUSED: Deleted type q_modulusOfCompressionMeasure.--> |
---|
1992 | <!--UNUSED: Deleted type momentOfForceMeasure.--> |
---|
1993 | <!--UNUSED: Deleted type perLengthMeasure.--> |
---|
1994 | <!--UNUSED: Deleted type planeAngleMeasure.--> |
---|
1995 | <!--UNUSED: Deleted type powerMeasure.--> |
---|
1996 | <!--UNUSED: Deleted type q_pressureMeasure.--> |
---|
1997 | <!--UNUSED: Deleted type relativePowerMeasure.--> |
---|
1998 | <!--UNUSED: Deleted type specificVolumeMeasure.--> |
---|
1999 | <!--UNUSED: Deleted type q_thermodynamicTemperatureMeasure.--> |
---|
2000 | <!--UNUSED: Deleted type timeMeasure.--> |
---|
2001 | <!--UNUSED: Deleted type q_velocityMeasure.--> |
---|
2002 | <!--UNUSED: Deleted type volumeMeasure.--> |
---|
2003 | <!--UNUSED: Deleted type volumeFlowRateMeasure.--> |
---|
2004 | <!--UNUSED: Deleted type q_volumePerVolumeMeasure.--> |
---|
2005 | <!--UNUSED: Deleted type q_workMeasure.--> |
---|
2006 | <!--UNUSED: Deleted type compressibilityMeasure.--> |
---|
2007 | <!--UNUSED: Deleted type molarVolumeMeasure.--> |
---|
2008 | <!--UNUSED: Deleted type standardVolumeMeasure.--> |
---|
2009 | <!--UNUSED: Deleted type thermalConductivityMeasure.--> |
---|
2010 | <!--UNUSED: Deleted type volumePerStandardVolumeMeasure.--> |
---|
2011 | <!--UNUSED: Deleted type standardVolumePerStandardVolumeMeasure.--> |
---|
2012 | <!--UNUSED: Deleted type standardVolumePerVolumeMeasure.--> |
---|
2013 | <!--UNUSED: Deleted type accelerationLinearUom.--> |
---|
2014 | <!--UNUSED: Deleted type q_amountOfSubstanceUom.--> |
---|
2015 | <!--UNUSED: Deleted type anglePerLengthUom.--> |
---|
2016 | <!--UNUSED: Deleted type anglePerTimeUom.--> |
---|
2017 | <!--UNUSED: Deleted type areaUom.--> |
---|
2018 | <!--UNUSED: Deleted type areaPerAreaUom.--> |
---|
2019 | <!--UNUSED: Deleted type q_densityUom.--> |
---|
2020 | <!--UNUSED: Deleted type q_dimensionlessUom.--> |
---|
2021 | <!--UNUSED: Deleted type dynamicViscosityUom.--> |
---|
2022 | <!--UNUSED: Deleted type electricPotentialUom.--> |
---|
2023 | <!--UNUSED: Deleted type energyPerAreaUom.--> |
---|
2024 | <!--UNUSED: Deleted type equivalentPerMassUom.--> |
---|
2025 | <!--UNUSED: Deleted type forceUom.--> |
---|
2026 | <!--UNUSED: Deleted type forcePerVolumeUom.--> |
---|
2027 | <!--UNUSED: Deleted type q_frequencyUom.--> |
---|
2028 | <!--UNUSED: Deleted type illuminanceUom.--> |
---|
2029 | <!--UNUSED: Deleted type q_lengthUom.--> |
---|
2030 | <!--UNUSED: Deleted type q_lengthPerLengthUom.--> |
---|
2031 | <!--UNUSED: Deleted type magneticFieldStrengthUom.--> |
---|
2032 | <!--UNUSED: Deleted type q_massConcentrationUom.--> |
---|
2033 | <!--UNUSED: Deleted type q_massFlowRateUom.--> |
---|
2034 | <!--UNUSED: Deleted type q_massUom.--> |
---|
2035 | <!--UNUSED: Deleted type massPerLengthUom.--> |
---|
2036 | <!--UNUSED: Deleted type q_modulusOfCompressionUom.--> |
---|
2037 | <!--UNUSED: Deleted type momentOfForceUom.--> |
---|
2038 | <!--UNUSED: Deleted type perLengthUom.--> |
---|
2039 | <!--UNUSED: Deleted type planeAngleUom.--> |
---|
2040 | <!--UNUSED: Deleted type powerUom.--> |
---|
2041 | <!--UNUSED: Deleted type q_pressureUom.--> |
---|
2042 | <!--UNUSED: Deleted type relativePowerUom.--> |
---|
2043 | <!--UNUSED: Deleted type specificVolumeUom.--> |
---|
2044 | <!--UNUSED: Deleted type q_thermodynamicTemperatureUom.--> |
---|
2045 | <!--UNUSED: Deleted type timeUom.--> |
---|
2046 | <!--UNUSED: Deleted type q_velocityUom.--> |
---|
2047 | <!--UNUSED: Deleted type q_volumeUom.--> |
---|
2048 | <!--UNUSED: Deleted type q_volumeFlowRateUom.--> |
---|
2049 | <!--UNUSED: Deleted type q_volumePerVolumeUom.--> |
---|
2050 | <!--UNUSED: Deleted type q_workUom.--> |
---|
2051 | <!--UNUSED: Deleted type compressibilityUom.--> |
---|
2052 | <!--UNUSED: Deleted type molarVolumeUom.--> |
---|
2053 | <!--UNUSED: Deleted type thermalConductivityUom.--> |
---|
2054 | <xsd:complexType name="q_booleanTemplateStruct"> |
---|
2055 | <xsd:attribute name="queryValue" type="xsd:boolean"> |
---|
2056 | <xsd:annotation> |
---|
2057 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2058 | </xsd:annotation> |
---|
2059 | </xsd:attribute> |
---|
2060 | </xsd:complexType> |
---|
2061 | <!--UNUSED: Deleted type q_shortTemplateStruct.--> |
---|
2062 | <!--UNUSED: Deleted type q_intTemplateStruct.--> |
---|
2063 | <xsd:complexType name="q_stringTemplateStruct"> |
---|
2064 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
2065 | <xsd:annotation> |
---|
2066 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2067 | </xsd:annotation> |
---|
2068 | </xsd:attribute> |
---|
2069 | </xsd:complexType> |
---|
2070 | <xsd:complexType name="q_doubleTemplateStruct"> |
---|
2071 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
2072 | <xsd:annotation> |
---|
2073 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2074 | </xsd:annotation> |
---|
2075 | </xsd:attribute> |
---|
2076 | </xsd:complexType> |
---|
2077 | <xsd:complexType name="q_dateTimeTemplateStruct"> |
---|
2078 | <xsd:attribute name="queryValue" type="xsd:dateTime"> |
---|
2079 | <xsd:annotation> |
---|
2080 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2081 | </xsd:annotation> |
---|
2082 | </xsd:attribute> |
---|
2083 | </xsd:complexType> |
---|
2084 | <xsd:complexType name="q_dateTemplateStruct"> |
---|
2085 | <xsd:attribute name="queryValue" type="xsd:date"> |
---|
2086 | <xsd:annotation> |
---|
2087 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2088 | </xsd:annotation> |
---|
2089 | </xsd:attribute> |
---|
2090 | </xsd:complexType> |
---|
2091 | <!--UNUSED: Deleted type q_gYearTemplateStruct.--> |
---|
2092 | <xsd:complexType name="q_measure"> |
---|
2093 | <xsd:attribute name="uom" type="xsd:string"> |
---|
2094 | <xsd:annotation> |
---|
2095 | <xsd:documentation>The unit of measure for the value.</xsd:documentation> |
---|
2096 | </xsd:annotation> |
---|
2097 | </xsd:attribute> |
---|
2098 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
2099 | <xsd:annotation> |
---|
2100 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2101 | </xsd:annotation> |
---|
2102 | </xsd:attribute> |
---|
2103 | </xsd:complexType> |
---|
2104 | <!--UNUSED: Deleted type q_measureWithQualifier.--> |
---|
2105 | <xsd:complexType name="q_verticalCoord"> |
---|
2106 | <xsd:attribute name="uom" type="xsd:string"> |
---|
2107 | <xsd:annotation> |
---|
2108 | <xsd:documentation>The unit of measure for the value.</xsd:documentation> |
---|
2109 | </xsd:annotation> |
---|
2110 | </xsd:attribute> |
---|
2111 | <xsd:attribute name="datum" type="xsd:string"> |
---|
2112 | <xsd:annotation> |
---|
2113 | <xsd:documentation>The datum of the coordinate value.</xsd:documentation> |
---|
2114 | </xsd:annotation> |
---|
2115 | </xsd:attribute> |
---|
2116 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
2117 | <xsd:annotation> |
---|
2118 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
2119 | </xsd:annotation> |
---|
2120 | </xsd:attribute> |
---|
2121 | </xsd:complexType> |
---|
2122 | <!--UNUSED: Deleted type q_integerString.--> |
---|
2123 | </xsd:schema> |
---|