[17] | 1 | <?xml version="1.0" encoding="utf-8"?> |
---|
| 2 | <xsd:schema |
---|
| 3 | elementFormDefault="qualified" |
---|
| 4 | attributeFormDefault="unqualified" |
---|
| 5 | targetNamespace="http://www.witsml.org/schemas/131" |
---|
| 6 | xmlns:witsml="http://www.witsml.org/schemas/131" |
---|
| 7 | xmlns:xsd="http://www.w3.org/2001/XMLSchema" |
---|
| 8 | version="1.3.1"> |
---|
| 9 | <!-- --> |
---|
| 10 | <!-- Energistics License Agreement --> |
---|
| 11 | <!-- This file is distributed under the Energistics License Agreement at --> |
---|
| 12 | <!-- http://www.posc.org/about/license.shtml. --> |
---|
| 13 | <!-- Use of this file constitutes agreement with the Energistics License Agreement. --> |
---|
| 14 | <!-- --> |
---|
| 15 | <!--UNUSED: Deleted type q_attgrp_uid.--> |
---|
| 16 | <!--UNUSED: Deleted type cs_businessAssociate.--> |
---|
| 17 | <xsd:complexType name="q_cs_commonData"> |
---|
| 18 | <xsd:annotation> |
---|
| 19 | <xsd:documentation>WITSML - Common Data Component Schema</xsd:documentation> |
---|
| 20 | </xsd:annotation> |
---|
| 21 | <xsd:sequence> |
---|
| 22 | <xsd:element name="sourceName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 23 | <xsd:annotation> |
---|
| 24 | <xsd:documentation>An identifier to indicate the data originator. This identifies the server that originally created the object and thus most of the uids in the |
---|
| 25 | object (but not necessarily the uids of the parents). This is typically a url.</xsd:documentation> |
---|
| 26 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 27 | </xsd:annotation> |
---|
| 28 | </xsd:element> |
---|
| 29 | <xsd:element name="dTimCreation" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 30 | <xsd:annotation> |
---|
| 31 | <xsd:documentation>When the data was created at the persistent data store.</xsd:documentation> |
---|
| 32 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 33 | </xsd:annotation> |
---|
| 34 | </xsd:element> |
---|
| 35 | <xsd:element name="dTimLastChange" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 36 | <xsd:annotation> |
---|
| 37 | <xsd:documentation>Last change of any element of the data at the persistent data store. The change time is not updated for a growing object while it is |
---|
| 38 | growing.</xsd:documentation> |
---|
| 39 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 40 | </xsd:annotation> |
---|
| 41 | </xsd:element> |
---|
| 42 | <xsd:element name="itemState" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 43 | <xsd:annotation> |
---|
| 44 | <xsd:documentation>The item state for the data object.</xsd:documentation> |
---|
| 45 | <xsd:appinfo> |
---|
| 46 | constraints:@type="witsml:q_ItemState",xsd:enumeration="actual",xsd:enumeration="model",xsd:enumeration="plan",xsd:enumeration="unknown",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 47 | </xsd:annotation> |
---|
| 48 | </xsd:element> |
---|
| 49 | <xsd:element name="comments" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 50 | <xsd:annotation> |
---|
| 51 | <xsd:documentation>Comments and remarks.</xsd:documentation> |
---|
| 52 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 53 | </xsd:annotation> |
---|
| 54 | </xsd:element> |
---|
| 55 | </xsd:sequence> |
---|
| 56 | </xsd:complexType> |
---|
| 57 | <!--UNUSED: Deleted type cs_connectedNode.--> |
---|
| 58 | <!--UNUSED: Deleted type cs_curveData.--> |
---|
| 59 | <!--UNUSED: Deleted type cs_curveDefinition.--> |
---|
| 60 | <xsd:complexType name="q_cs_customData"> |
---|
| 61 | <xsd:annotation> |
---|
| 62 | <xsd:documentation>WITSML - Custom or User Defined Element and Attributes Component Schema. Specify custom element, attributes, and types in the custom data |
---|
| 63 | area.</xsd:documentation> |
---|
| 64 | </xsd:annotation> |
---|
| 65 | <xsd:sequence> |
---|
| 66 | <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"> |
---|
| 67 | <xsd:annotation> |
---|
| 68 | <xsd:documentation>Any element or attribute in any namespace. It is strongly recommended that all custom data definitions be added to a unique |
---|
| 69 | namespace.</xsd:documentation> |
---|
| 70 | </xsd:annotation> |
---|
| 71 | </xsd:any> |
---|
| 72 | </xsd:sequence> |
---|
| 73 | </xsd:complexType> |
---|
| 74 | <!--UNUSED: Deleted type cs_datedComment.--> |
---|
| 75 | <!--UNUSED: Deleted type q_cs_densityValue.--> |
---|
| 76 | <xsd:complexType name="q_cs_documentInfo"> |
---|
| 77 | <xsd:annotation> |
---|
| 78 | <xsd:documentation>A schema to capture a set of data that is relevant for many exchange documents. It includes information about the file that was created, and high-level |
---|
| 79 | information about the data that is being exchanged within the file.</xsd:documentation> |
---|
| 80 | </xsd:annotation> |
---|
| 81 | <xsd:sequence> |
---|
| 82 | <xsd:element name="DocumentName" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="1"> |
---|
| 83 | <xsd:annotation> |
---|
| 84 | <xsd:documentation>An identifier for the document. This is intended to be unique within the context of the NamingSystem.</xsd:documentation> |
---|
| 85 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 86 | </xsd:annotation> |
---|
| 87 | </xsd:element> |
---|
| 88 | <xsd:element name="DocumentAlias" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
| 89 | <xsd:annotation> |
---|
| 90 | <xsd:documentation>Zero or more alternate names for the document. These names do not need to be unique within the naming system.</xsd:documentation> |
---|
| 91 | </xsd:annotation> |
---|
| 92 | </xsd:element> |
---|
| 93 | <xsd:element name="DocumentDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 94 | <xsd:annotation> |
---|
| 95 | <xsd:documentation>The date of the creation of the document. This is not the same as the date that the file was created. For this date, the document is considered |
---|
| 96 | to be the set of information associated with this document information. For example, the document may be a seismic binset. This represents the date that the binset |
---|
| 97 | was created. The FileCreation information would capture the date that the XML file was created to send or exchange the binset.</xsd:documentation> |
---|
| 98 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 99 | </xsd:annotation> |
---|
| 100 | </xsd:element> |
---|
| 101 | <xsd:element name="documentClass" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
| 102 | <xsd:annotation> |
---|
| 103 | <xsd:documentation>A document class. Examples of classes would be a metadata classification or a set of keywords.</xsd:documentation> |
---|
| 104 | </xsd:annotation> |
---|
| 105 | </xsd:element> |
---|
| 106 | <xsd:element name="FileCreationInformation" type="witsml:q_fileCreationType" minOccurs="0" maxOccurs="1"> |
---|
| 107 | <xsd:annotation> |
---|
| 108 | <xsd:documentation>The information about the creation of the exchange file. This is not about the creation of the data within the file, but the creation of the file |
---|
| 109 | itself.</xsd:documentation> |
---|
| 110 | </xsd:annotation> |
---|
| 111 | </xsd:element> |
---|
| 112 | <xsd:element name="SecurityInformation" type="witsml:q_securityInfoType" minOccurs="0" maxOccurs="unbounded"> |
---|
| 113 | <xsd:annotation> |
---|
| 114 | <xsd:documentation>Information about the security to be applied to this file. More than one classification can be given.</xsd:documentation> |
---|
| 115 | </xsd:annotation> |
---|
| 116 | </xsd:element> |
---|
| 117 | <xsd:element name="Disclaimer" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 118 | <xsd:annotation> |
---|
| 119 | <xsd:documentation>A free-form string that allows a disclaimer to accompany the information.</xsd:documentation> |
---|
| 120 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 121 | </xsd:annotation> |
---|
| 122 | </xsd:element> |
---|
| 123 | <xsd:element name="AuditTrail" type="witsml:q_auditType" minOccurs="0" maxOccurs="1"> |
---|
| 124 | <xsd:annotation> |
---|
| 125 | <xsd:documentation>A collection of events that can document the history of the data.</xsd:documentation> |
---|
| 126 | </xsd:annotation> |
---|
| 127 | </xsd:element> |
---|
| 128 | <xsd:element name="Owner" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 129 | <xsd:annotation> |
---|
| 130 | <xsd:documentation>The owner of the data.</xsd:documentation> |
---|
| 131 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 132 | </xsd:annotation> |
---|
| 133 | </xsd:element> |
---|
| 134 | <xsd:element name="QueryParam" type="witsml:q_queryParam" minOccurs="0" maxOccurs="1"> |
---|
| 135 | <xsd:annotation> |
---|
| 136 | <xsd:documentation>WITSML query parameters.</xsd:documentation> |
---|
| 137 | </xsd:annotation> |
---|
| 138 | </xsd:element> |
---|
| 139 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 140 | <xsd:annotation> |
---|
| 141 | <xsd:documentation>An optional comment about the document.</xsd:documentation> |
---|
| 142 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 143 | </xsd:annotation> |
---|
| 144 | </xsd:element> |
---|
| 145 | </xsd:sequence> |
---|
| 146 | </xsd:complexType> |
---|
| 147 | <xsd:complexType name="q_queryParam"> |
---|
| 148 | <xsd:annotation> |
---|
| 149 | <xsd:documentation>A structure for WITSML query parameters. The intent is to allow a query for all objects within an index range (whether or not the object is growing). |
---|
| 150 | These would typically be something like a daily report.</xsd:documentation> |
---|
| 151 | </xsd:annotation> |
---|
| 152 | <xsd:sequence> |
---|
| 153 | <xsd:element name="dTimMin" type="witsml:q_endpointQualifiedDateTime" minOccurs="0" maxOccurs="1"> |
---|
| 154 | <xsd:annotation> |
---|
| 155 | <xsd:documentation>The minimum start time for an object. This only applies to objects with a root level date and/or dateTime element(s). The objects may or not be |
---|
| 156 | growing objects but the See the API specification for behavior related to this query parameter.</xsd:documentation> |
---|
| 157 | </xsd:annotation> |
---|
| 158 | </xsd:element> |
---|
| 159 | <xsd:element name="dTimMax" type="witsml:q_endpointQualifiedDateTime" minOccurs="0" maxOccurs="1"> |
---|
| 160 | <xsd:annotation> |
---|
| 161 | <xsd:documentation>The maximum start time for an object. This only applies to objects with a root level date and/or dateTime element(s). See the API specification |
---|
| 162 | for behavior related to this query parameter.</xsd:documentation> |
---|
| 163 | </xsd:annotation> |
---|
| 164 | </xsd:element> |
---|
| 165 | </xsd:sequence> |
---|
| 166 | </xsd:complexType> |
---|
| 167 | <xsd:complexType name="q_fileCreationType"> |
---|
| 168 | <xsd:annotation> |
---|
| 169 | <xsd:documentation>A block of information about the creation of the XML file. This is different than the creation of the data that is included within the |
---|
| 170 | file.</xsd:documentation> |
---|
| 171 | </xsd:annotation> |
---|
| 172 | <xsd:sequence> |
---|
| 173 | <xsd:element name="FileCreationDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 174 | <xsd:annotation> |
---|
| 175 | <xsd:documentation>The date and time that the file was created.</xsd:documentation> |
---|
| 176 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 177 | </xsd:annotation> |
---|
| 178 | </xsd:element> |
---|
| 179 | <xsd:element name="SoftwareName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 180 | <xsd:annotation> |
---|
| 181 | <xsd:documentation>If appropriate, the software that created the file. This is a free form string, and may include whatever information is deemed |
---|
| 182 | relevant.</xsd:documentation> |
---|
| 183 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 184 | </xsd:annotation> |
---|
| 185 | </xsd:element> |
---|
| 186 | <xsd:element name="FileCreator" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 187 | <xsd:annotation> |
---|
| 188 | <xsd:documentation>The person or business associate that created the file.</xsd:documentation> |
---|
| 189 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 190 | </xsd:annotation> |
---|
| 191 | </xsd:element> |
---|
| 192 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 193 | <xsd:annotation> |
---|
| 194 | <xsd:documentation>Any comment that would be useful to further explain the creation of this instance document.</xsd:documentation> |
---|
| 195 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 196 | </xsd:annotation> |
---|
| 197 | </xsd:element> |
---|
| 198 | </xsd:sequence> |
---|
| 199 | </xsd:complexType> |
---|
| 200 | <xsd:complexType name="q_securityInfoType"> |
---|
| 201 | <xsd:annotation> |
---|
| 202 | <xsd:documentation>Information about the security classification of the document. This is intended as a documentation of the security so that the file will not |
---|
| 203 | inadvertently be sent to someone who is not allowed access to the data. This block also carries a date that the security classification expires. For example, a well log |
---|
| 204 | is confidential for a period of time, and then becomes open. All security classes are characterized by their classification systems.</xsd:documentation> |
---|
| 205 | </xsd:annotation> |
---|
| 206 | <xsd:sequence> |
---|
| 207 | <xsd:element name="Class" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 208 | <xsd:annotation> |
---|
| 209 | <xsd:documentation>The security class in which this document is classified. Examples would be confidential, partner confidential, tight. The meaning of the class is |
---|
| 210 | determined by the System in which it is defined.</xsd:documentation> |
---|
| 211 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 212 | </xsd:annotation> |
---|
| 213 | </xsd:element> |
---|
| 214 | <xsd:element name="SecuritySystem" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 215 | <xsd:annotation> |
---|
| 216 | <xsd:documentation>The security classification system. This gives context to the meaning of the Class value.</xsd:documentation> |
---|
| 217 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 218 | </xsd:annotation> |
---|
| 219 | </xsd:element> |
---|
| 220 | <xsd:element name="EndDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 221 | <xsd:annotation> |
---|
| 222 | <xsd:documentation>The date on which this security class is no longer applicable.</xsd:documentation> |
---|
| 223 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 224 | </xsd:annotation> |
---|
| 225 | </xsd:element> |
---|
| 226 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 227 | <xsd:annotation> |
---|
| 228 | <xsd:documentation>A general comment to further define the security class.</xsd:documentation> |
---|
| 229 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 230 | </xsd:annotation> |
---|
| 231 | </xsd:element> |
---|
| 232 | </xsd:sequence> |
---|
| 233 | </xsd:complexType> |
---|
| 234 | <xsd:complexType name="q_auditType"> |
---|
| 235 | <xsd:annotation> |
---|
| 236 | <xsd:documentation>The audit records what happened to the data, to produce the data that is in this file. It consists of one or more events.</xsd:documentation> |
---|
| 237 | </xsd:annotation> |
---|
| 238 | <xsd:sequence> |
---|
| 239 | <xsd:element name="Event" type="witsml:q_eventType" minOccurs="0" maxOccurs="unbounded"> |
---|
| 240 | <xsd:annotation> |
---|
| 241 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 242 | </xsd:annotation> |
---|
| 243 | </xsd:element> |
---|
| 244 | </xsd:sequence> |
---|
| 245 | </xsd:complexType> |
---|
| 246 | <xsd:complexType name="q_eventType"> |
---|
| 247 | <xsd:annotation> |
---|
| 248 | <xsd:documentation>An event type captures the basic information about an event that has affected the data.</xsd:documentation> |
---|
| 249 | </xsd:annotation> |
---|
| 250 | <xsd:sequence> |
---|
| 251 | <xsd:element name="EventDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 252 | <xsd:annotation> |
---|
| 253 | <xsd:documentation>The date on which the event took place.</xsd:documentation> |
---|
| 254 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 255 | </xsd:annotation> |
---|
| 256 | </xsd:element> |
---|
| 257 | <xsd:element name="ResponsibleParty" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 258 | <xsd:annotation> |
---|
| 259 | <xsd:documentation>The party responsible for the event.</xsd:documentation> |
---|
| 260 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 261 | </xsd:annotation> |
---|
| 262 | </xsd:element> |
---|
| 263 | <xsd:element name="Comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 264 | <xsd:annotation> |
---|
| 265 | <xsd:documentation>A free form comment that can further define the event that occurred.</xsd:documentation> |
---|
| 266 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 267 | </xsd:annotation> |
---|
| 268 | </xsd:element> |
---|
| 269 | </xsd:sequence> |
---|
| 270 | </xsd:complexType> |
---|
| 271 | <xsd:complexType name="q_cs_dtsBoxInformation"> |
---|
| 272 | <xsd:annotation> |
---|
| 273 | <xsd:documentation>The instrument box used for distributed temperature surveys</xsd:documentation> |
---|
| 274 | </xsd:annotation> |
---|
| 275 | <xsd:sequence> |
---|
| 276 | <xsd:element name="installationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 277 | <xsd:annotation> |
---|
| 278 | <xsd:documentation>The date the instrument box was installed.</xsd:documentation> |
---|
| 279 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 280 | </xsd:annotation> |
---|
| 281 | </xsd:element> |
---|
| 282 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 283 | <xsd:annotation> |
---|
| 284 | <xsd:documentation>The company that installed the instrument box in the wellbore measurement system.</xsd:documentation> |
---|
| 285 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 286 | </xsd:annotation> |
---|
| 287 | </xsd:element> |
---|
| 288 | <xsd:element name="deInstallationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 289 | <xsd:annotation> |
---|
| 290 | <xsd:documentation>The date the instrument box was de-installed from the wellbore.</xsd:documentation> |
---|
| 291 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 292 | </xsd:annotation> |
---|
| 293 | </xsd:element> |
---|
| 294 | <xsd:element name="instrumentBox" type="witsml:q_cs_dtsInstrumentBox" minOccurs="0" maxOccurs="1"> |
---|
| 295 | <xsd:annotation> |
---|
| 296 | <xsd:documentation>The properties of the instrument box.</xsd:documentation> |
---|
| 297 | </xsd:annotation> |
---|
| 298 | </xsd:element> |
---|
| 299 | </xsd:sequence> |
---|
| 300 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 301 | <xsd:annotation> |
---|
| 302 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 303 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 304 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 305 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 306 | </xsd:annotation> |
---|
| 307 | </xsd:attribute> |
---|
| 308 | </xsd:complexType> |
---|
| 309 | <xsd:complexType name="q_cs_dtsCalibration"> |
---|
| 310 | <xsd:annotation> |
---|
| 311 | <xsd:documentation>Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is a general type that allows a calibration |
---|
| 312 | date, business associate, and many name/value pairs.</xsd:documentation> |
---|
| 313 | </xsd:annotation> |
---|
| 314 | <xsd:sequence> |
---|
| 315 | <xsd:element name="dTimCalibration" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 316 | <xsd:annotation> |
---|
| 317 | <xsd:documentation>The date of the calibration</xsd:documentation> |
---|
| 318 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 319 | </xsd:annotation> |
---|
| 320 | </xsd:element> |
---|
| 321 | <xsd:element name="calibratedBy" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 322 | <xsd:annotation> |
---|
| 323 | <xsd:documentation>The business associate that performed the calibration.</xsd:documentation> |
---|
| 324 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 325 | </xsd:annotation> |
---|
| 326 | </xsd:element> |
---|
| 327 | <xsd:element name="calibrationProtocol" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 328 | <xsd:annotation> |
---|
| 329 | <xsd:documentation>This may be a standard protocol, or a software application.</xsd:documentation> |
---|
| 330 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 331 | </xsd:annotation> |
---|
| 332 | </xsd:element> |
---|
| 333 | <xsd:element name="parameter" type="witsml:q_cs_dtsCalibrationParameter" minOccurs="0" maxOccurs="unbounded"> |
---|
| 334 | <xsd:annotation> |
---|
| 335 | <xsd:documentation>Attribute name is the name of the parameter. Optional attribute uom is the unit of measure of the parameter. The value of the element is the |
---|
| 336 | value of the parameter. Note that a string value may appear as a parameter.</xsd:documentation> |
---|
| 337 | </xsd:annotation> |
---|
| 338 | </xsd:element> |
---|
| 339 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 340 | <xsd:annotation> |
---|
| 341 | <xsd:documentation>Any remarks that may be useful, regarding the calibration information.</xsd:documentation> |
---|
| 342 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 343 | </xsd:annotation> |
---|
| 344 | </xsd:element> |
---|
| 345 | </xsd:sequence> |
---|
| 346 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 347 | <xsd:annotation> |
---|
| 348 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 349 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 350 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 351 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 352 | </xsd:annotation> |
---|
| 353 | </xsd:attribute> |
---|
| 354 | </xsd:complexType> |
---|
| 355 | <xsd:complexType name="q_cs_dtsCalibrationParameter"> |
---|
| 356 | <xsd:annotation> |
---|
| 357 | <xsd:documentation>Parameters are given by name/ value pairs, with optional uom. The parameter name and uom are attributes, and the value is the value of the |
---|
| 358 | element.</xsd:documentation> |
---|
| 359 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 360 | </xsd:annotation> |
---|
| 361 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 362 | <xsd:annotation> |
---|
| 363 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 364 | </xsd:annotation> |
---|
| 365 | </xsd:attribute> |
---|
| 366 | <xsd:attribute name="uom" type="xsd:string" use="optional"> |
---|
| 367 | <xsd:annotation> |
---|
| 368 | <xsd:documentation>The unit of measure of the parameter value.</xsd:documentation> |
---|
| 369 | <xsd:appinfo>constraints:@type="witsml:q_uomString",xsd:maxLength="24",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 370 | </xsd:annotation> |
---|
| 371 | </xsd:attribute> |
---|
| 372 | <xsd:attribute name="name" type="xsd:string" use="optional"> |
---|
| 373 | <xsd:annotation> |
---|
| 374 | <xsd:documentation>The name of the parameter.</xsd:documentation> |
---|
| 375 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 376 | </xsd:annotation> |
---|
| 377 | </xsd:attribute> |
---|
| 378 | </xsd:complexType> |
---|
| 379 | <!--UNUSED: Deleted type cs_dtsErrorReport.--> |
---|
| 380 | <xsd:complexType name="q_cs_dtsFiber"> |
---|
| 381 | <xsd:annotation> |
---|
| 382 | <xsd:documentation>The optical fiber used for distributed temperature surveys</xsd:documentation> |
---|
| 383 | </xsd:annotation> |
---|
| 384 | <xsd:sequence> |
---|
| 385 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 386 | <xsd:annotation> |
---|
| 387 | <xsd:documentation>A human understandable name for the fiber. This is used for identification of the instance.</xsd:documentation> |
---|
| 388 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 389 | </xsd:annotation> |
---|
| 390 | </xsd:element> |
---|
| 391 | <xsd:element name="mode" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 392 | <xsd:annotation> |
---|
| 393 | <xsd:documentation>The mode of fiber.</xsd:documentation> |
---|
| 394 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_FiberMode",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 395 | </xsd:annotation> |
---|
| 396 | </xsd:element> |
---|
| 397 | <xsd:element name="type" type="witsml:q_typeOptionalClassString" minOccurs="0" maxOccurs="unbounded"> |
---|
| 398 | <xsd:annotation> |
---|
| 399 | <xsd:documentation>Zero or more instances that allow other classifications to be assigned to the fiber.</xsd:documentation> |
---|
| 400 | </xsd:annotation> |
---|
| 401 | </xsd:element> |
---|
| 402 | <xsd:element name="coating" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 403 | <xsd:annotation> |
---|
| 404 | <xsd:documentation>The type of coating on the fiber.</xsd:documentation> |
---|
| 405 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 406 | </xsd:annotation> |
---|
| 407 | </xsd:element> |
---|
| 408 | <xsd:element name="jacket" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 409 | <xsd:annotation> |
---|
| 410 | <xsd:documentation>The type of jacket covering the fiber.</xsd:documentation> |
---|
| 411 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 412 | </xsd:annotation> |
---|
| 413 | </xsd:element> |
---|
| 414 | <xsd:element name="coreDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 415 | <xsd:annotation> |
---|
| 416 | <xsd:documentation>The inner diameter of the core, generally measured in microns (um).</xsd:documentation> |
---|
| 417 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 418 | </xsd:annotation> |
---|
| 419 | </xsd:element> |
---|
| 420 | <xsd:element name="claddedDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 421 | <xsd:annotation> |
---|
| 422 | <xsd:documentation>The diameter of the core plus the cladding, generally measured in microns (um).</xsd:documentation> |
---|
| 423 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 424 | </xsd:annotation> |
---|
| 425 | </xsd:element> |
---|
| 426 | <xsd:element name="outsideDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 427 | <xsd:annotation> |
---|
| 428 | <xsd:documentation>The diameter of the cable and all its sheathing, generally measured in microns (um). This is intended to be the diameter of the cable on the |
---|
| 429 | spool.</xsd:documentation> |
---|
| 430 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 431 | </xsd:annotation> |
---|
| 432 | </xsd:element> |
---|
| 433 | <xsd:element name="refractiveIndex" type="witsml:q_cs_dtsRefractiveIndex" minOccurs="0" maxOccurs="unbounded"> |
---|
| 434 | <xsd:annotation> |
---|
| 435 | <xsd:documentation>The refractive index of the fiber. Also included is the frequency in Hz for which this refractive index is valid. There may be multiple instances |
---|
| 436 | of this element.</xsd:documentation> |
---|
| 437 | </xsd:annotation> |
---|
| 438 | </xsd:element> |
---|
| 439 | <xsd:element name="oneWayLoss" type="witsml:q_cs_dtsOneWayLoss" minOccurs="0" maxOccurs="unbounded"> |
---|
| 440 | <xsd:annotation> |
---|
| 441 | <xsd:documentation>The power loss (usually in decibels) per unit of length of the fiber. Also included is the frequency for which this loss is measured. There ay be |
---|
| 442 | multiple instances of this element.</xsd:documentation> |
---|
| 443 | </xsd:annotation> |
---|
| 444 | </xsd:element> |
---|
| 445 | <xsd:element name="parameter" type="witsml:q_indexedObject" minOccurs="0" maxOccurs="unbounded"> |
---|
| 446 | <xsd:annotation> |
---|
| 447 | <xsd:documentation>Additional parameters to define the fiber as a material. These should not be parameters to define the installation of the fiber in a well, or |
---|
| 448 | other system. This element should be used only if an appropriate parameter is not available as an element, or in the calibration operation.</xsd:documentation> |
---|
| 449 | </xsd:annotation> |
---|
| 450 | </xsd:element> |
---|
| 451 | <xsd:element name="spoolNumberTag" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 452 | <xsd:annotation> |
---|
| 453 | <xsd:documentation>The spool number located on the particular spool. The spool number may contain alphanumeric characters.</xsd:documentation> |
---|
| 454 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 455 | </xsd:annotation> |
---|
| 456 | </xsd:element> |
---|
| 457 | <xsd:element name="spoolLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 458 | <xsd:annotation> |
---|
| 459 | <xsd:documentation>The length of the fiber on the spool when purchased.</xsd:documentation> |
---|
| 460 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 461 | </xsd:annotation> |
---|
| 462 | </xsd:element> |
---|
| 463 | <xsd:element name="supplyDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 464 | <xsd:annotation> |
---|
| 465 | <xsd:documentation>A fiber may go through several manufacturers for its various parts. The supplier is the final company in the chain that supplies the fiber to the |
---|
| 466 | end user.</xsd:documentation> |
---|
| 467 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 468 | </xsd:annotation> |
---|
| 469 | </xsd:element> |
---|
| 470 | <xsd:element name="supplier" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 471 | <xsd:annotation> |
---|
| 472 | <xsd:documentation>A fiber may go through several manufacturers for its various parts. The supplier is the final company in the chain that supplies the fiber to the |
---|
| 473 | end user.</xsd:documentation> |
---|
| 474 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 475 | </xsd:annotation> |
---|
| 476 | </xsd:element> |
---|
| 477 | <xsd:element name="supplierModelNumber" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 478 | <xsd:annotation> |
---|
| 479 | <xsd:documentation>The model number (alphanumeric) that is used by the supplier to reference the type of fiber that is supplied to the user.</xsd:documentation> |
---|
| 480 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 481 | </xsd:annotation> |
---|
| 482 | </xsd:element> |
---|
| 483 | <xsd:element name="factoryCalibration" type="witsml:q_cs_dtsCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
| 484 | <xsd:annotation> |
---|
| 485 | <xsd:documentation>Information about calibrations and quality checks that were performed on the cable at the factory. This is not to include calibrations that are |
---|
| 486 | run at installation time and at measurement time.</xsd:documentation> |
---|
| 487 | </xsd:annotation> |
---|
| 488 | </xsd:element> |
---|
| 489 | <xsd:element name="installationHistory" type="witsml:q_refNameString" minOccurs="0" maxOccurs="unbounded"> |
---|
| 490 | <xsd:annotation> |
---|
| 491 | <xsd:documentation>A reference to a dtsInstalledSytem object that previously used the fiber.</xsd:documentation> |
---|
| 492 | </xsd:annotation> |
---|
| 493 | </xsd:element> |
---|
| 494 | </xsd:sequence> |
---|
| 495 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 496 | <xsd:annotation> |
---|
| 497 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 498 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 499 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 500 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 501 | </xsd:annotation> |
---|
| 502 | </xsd:attribute> |
---|
| 503 | </xsd:complexType> |
---|
| 504 | <xsd:complexType name="q_cs_dtsFiberEndPoint"> |
---|
| 505 | <xsd:annotation> |
---|
| 506 | <xsd:documentation>A fiber installed in a "U" configuration has two end points that a cable may hook to. When making a measurement, it is useful to be able to say which |
---|
| 507 | end was hooked to the input from the instrument box. In order to do this, the fiber ends must be identified. The identifier is a name, along with a description to further |
---|
| 508 | aid the interpreter in determining which end was used as the input</xsd:documentation> |
---|
| 509 | </xsd:annotation> |
---|
| 510 | <xsd:sequence> |
---|
| 511 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 512 | <xsd:annotation> |
---|
| 513 | <xsd:documentation>A name, unique within the context of the well, for an instrument box cable to hook to.</xsd:documentation> |
---|
| 514 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 515 | </xsd:annotation> |
---|
| 516 | </xsd:element> |
---|
| 517 | <xsd:element name="description" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 518 | <xsd:annotation> |
---|
| 519 | <xsd:documentation>Any description of the node that may be useful in identifying the hookup.</xsd:documentation> |
---|
| 520 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 521 | </xsd:annotation> |
---|
| 522 | </xsd:element> |
---|
| 523 | </xsd:sequence> |
---|
| 524 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 525 | <xsd:annotation> |
---|
| 526 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 527 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 528 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 529 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 530 | </xsd:annotation> |
---|
| 531 | </xsd:attribute> |
---|
| 532 | </xsd:complexType> |
---|
| 533 | <xsd:complexType name="q_cs_dtsFiberInformation"> |
---|
| 534 | <xsd:annotation> |
---|
| 535 | <xsd:documentation>The optical fiber used for distributed temperature surveys</xsd:documentation> |
---|
| 536 | </xsd:annotation> |
---|
| 537 | <xsd:sequence> |
---|
| 538 | <xsd:element name="installationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 539 | <xsd:annotation> |
---|
| 540 | <xsd:documentation>The date the fiber is installed.</xsd:documentation> |
---|
| 541 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 542 | </xsd:annotation> |
---|
| 543 | </xsd:element> |
---|
| 544 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 545 | <xsd:annotation> |
---|
| 546 | <xsd:documentation>The company that installed the fiber in the wellbore.</xsd:documentation> |
---|
| 547 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 548 | </xsd:annotation> |
---|
| 549 | </xsd:element> |
---|
| 550 | <xsd:element name="deInstallationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 551 | <xsd:annotation> |
---|
| 552 | <xsd:documentation>The date the fiber was de-installed from the wellbore.</xsd:documentation> |
---|
| 553 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 554 | </xsd:annotation> |
---|
| 555 | </xsd:element> |
---|
| 556 | <xsd:element name="capillaryTubeDiameter" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 557 | <xsd:annotation> |
---|
| 558 | <xsd:documentation>The diameter of the capillary tube into which one or more fibers will be installed. If the installation has fibers that go to different |
---|
| 559 | wellbores, only those fibers installed in the parent wellbore should be included in this instance.</xsd:documentation> |
---|
| 560 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 561 | </xsd:annotation> |
---|
| 562 | </xsd:element> |
---|
| 563 | <xsd:element name="fiber" type="witsml:q_cs_dtsFiber" minOccurs="0" maxOccurs="unbounded"> |
---|
| 564 | <xsd:annotation> |
---|
| 565 | <xsd:documentation>The properties of the fiber or fibers installed in the wellbore.</xsd:documentation> |
---|
| 566 | </xsd:annotation> |
---|
| 567 | </xsd:element> |
---|
| 568 | </xsd:sequence> |
---|
| 569 | </xsd:complexType> |
---|
| 570 | <xsd:complexType name="q_cs_dtsFiberInstalledPoints"> |
---|
| 571 | <xsd:annotation> |
---|
| 572 | <xsd:documentation>A wrapper for multiple instances of the point in a well.</xsd:documentation> |
---|
| 573 | </xsd:annotation> |
---|
| 574 | <xsd:sequence> |
---|
| 575 | <xsd:element name="installedPoint" type="witsml:q_cs_dtsSingleInstalledPoint" minOccurs="0" maxOccurs="unbounded"> |
---|
| 576 | <xsd:annotation> |
---|
| 577 | <xsd:documentation>This carries the information about one point</xsd:documentation> |
---|
| 578 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 579 | </xsd:annotation> |
---|
| 580 | </xsd:element> |
---|
| 581 | </xsd:sequence> |
---|
| 582 | </xsd:complexType> |
---|
| 583 | <xsd:complexType name="q_cs_dtsInstrumentBox"> |
---|
| 584 | <xsd:annotation> |
---|
| 585 | <xsd:documentation>The instrument box used for distributed temperature surveys</xsd:documentation> |
---|
| 586 | </xsd:annotation> |
---|
| 587 | <xsd:sequence> |
---|
| 588 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 589 | <xsd:annotation> |
---|
| 590 | <xsd:documentation>A name for the instrument box. This can be used to access the instrument box.</xsd:documentation> |
---|
| 591 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 592 | </xsd:annotation> |
---|
| 593 | </xsd:element> |
---|
| 594 | <xsd:element name="manufacturer" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 595 | <xsd:annotation> |
---|
| 596 | <xsd:documentation>The ultimate manufacturer of the instrument box.</xsd:documentation> |
---|
| 597 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 598 | </xsd:annotation> |
---|
| 599 | </xsd:element> |
---|
| 600 | <xsd:element name="manufacturingDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 601 | <xsd:annotation> |
---|
| 602 | <xsd:documentation>The date the manufacturing of the instrument box was completed.</xsd:documentation> |
---|
| 603 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 604 | </xsd:annotation> |
---|
| 605 | </xsd:element> |
---|
| 606 | <xsd:element name="type" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 607 | <xsd:annotation> |
---|
| 608 | <xsd:documentation>The type of instrument box used.</xsd:documentation> |
---|
| 609 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 610 | </xsd:annotation> |
---|
| 611 | </xsd:element> |
---|
| 612 | <xsd:element name="nameTag" type="witsml:q_cs_nameTag" minOccurs="0" maxOccurs="unbounded"> |
---|
| 613 | <xsd:annotation> |
---|
| 614 | <xsd:documentation>An identification tag for the instrument box. A serial number is a type of identification tag however some tags contain many pieces of |
---|
| 615 | information. This structure just identifies the tag and does not describe the contents.</xsd:documentation> |
---|
| 616 | </xsd:annotation> |
---|
| 617 | </xsd:element> |
---|
| 618 | <xsd:element name="softwareVersion" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 619 | <xsd:annotation> |
---|
| 620 | <xsd:documentation>The version of the software installed in the instrument box.</xsd:documentation> |
---|
| 621 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 622 | </xsd:annotation> |
---|
| 623 | </xsd:element> |
---|
| 624 | <xsd:element name="factoryCalibration" type="witsml:q_cs_dtsInstrumentBoxCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
| 625 | <xsd:annotation> |
---|
| 626 | <xsd:documentation>Information about the calibration of the instrument box that was performed. This includes factory calibrations before shipping, and bench |
---|
| 627 | calibrations. This does not include calibrations made in preparation for taking measurements.</xsd:documentation> |
---|
| 628 | </xsd:annotation> |
---|
| 629 | </xsd:element> |
---|
| 630 | <xsd:element name="internalOvenLocationNear" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 631 | <xsd:annotation> |
---|
| 632 | <xsd:documentation>Near distance of the oven from the beginning of the fiber.</xsd:documentation> |
---|
| 633 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 634 | </xsd:annotation> |
---|
| 635 | </xsd:element> |
---|
| 636 | <xsd:element name="internalOvenLocationFar" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 637 | <xsd:annotation> |
---|
| 638 | <xsd:documentation>Far distance of the oven from the beginning of the fiber.</xsd:documentation> |
---|
| 639 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 640 | </xsd:annotation> |
---|
| 641 | </xsd:element> |
---|
| 642 | <xsd:element name="ovenSetPoint" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 643 | <xsd:annotation> |
---|
| 644 | <xsd:documentation>The temperature of the oven.</xsd:documentation> |
---|
| 645 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
| 646 | </xsd:annotation> |
---|
| 647 | </xsd:element> |
---|
| 648 | <xsd:element name="testCable" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 649 | <xsd:annotation> |
---|
| 650 | <xsd:documentation>The cable used to test the instrument box.</xsd:documentation> |
---|
| 651 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 652 | </xsd:annotation> |
---|
| 653 | </xsd:element> |
---|
| 654 | <xsd:element name="offset" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 655 | <xsd:annotation> |
---|
| 656 | <xsd:documentation>The offset setting applied to the instrument box based on the factory or bench calibration.</xsd:documentation> |
---|
| 657 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 658 | </xsd:annotation> |
---|
| 659 | </xsd:element> |
---|
| 660 | <xsd:element name="differentialLossSetting" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 661 | <xsd:annotation> |
---|
| 662 | <xsd:documentation>The power loss over the length of the cable.</xsd:documentation> |
---|
| 663 | <xsd:appinfo>constraints:@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
| 664 | </xsd:annotation> |
---|
| 665 | </xsd:element> |
---|
| 666 | <xsd:element name="parameter" type="witsml:q_indexedObject" minOccurs="0" maxOccurs="unbounded"> |
---|
| 667 | <xsd:annotation> |
---|
| 668 | <xsd:documentation>Additional parameters to define the instrument box as a piece of equipment. These should not be parameters to define the installation or use of |
---|
| 669 | the box in the wellbore, or other system. This element should be used only if an appropriate parameter is not available as an element, or in the calibration |
---|
| 670 | operation.</xsd:documentation> |
---|
| 671 | </xsd:annotation> |
---|
| 672 | </xsd:element> |
---|
| 673 | </xsd:sequence> |
---|
| 674 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 675 | <xsd:annotation> |
---|
| 676 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 677 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 678 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 679 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 680 | </xsd:annotation> |
---|
| 681 | </xsd:attribute> |
---|
| 682 | </xsd:complexType> |
---|
| 683 | <xsd:complexType name="q_cs_dtsInstrumentBoxCalibration"> |
---|
| 684 | <xsd:annotation> |
---|
| 685 | <xsd:documentation>Calibration parameters vary from vendor to vendor, depending on the calibration method being used. This is an extension of the general |
---|
| 686 | cs_dtsCalibration, and allows for specific parameters associated with an instrument box. The two additional parameters are the offset temperature calibration, and the |
---|
| 687 | slope calibration. These allow for a linear shift in temperature vs measurements. Additional offset and slope calibrations may be performed at measurement |
---|
| 688 | time.</xsd:documentation> |
---|
| 689 | </xsd:annotation> |
---|
| 690 | <xsd:sequence> |
---|
| 691 | <xsd:element name="dTimCalibration" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 692 | <xsd:annotation> |
---|
| 693 | <xsd:documentation>The date of the calibration</xsd:documentation> |
---|
| 694 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 695 | </xsd:annotation> |
---|
| 696 | </xsd:element> |
---|
| 697 | <xsd:element name="calibratedBy" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 698 | <xsd:annotation> |
---|
| 699 | <xsd:documentation>The business associate that performed the calibration.</xsd:documentation> |
---|
| 700 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 701 | </xsd:annotation> |
---|
| 702 | </xsd:element> |
---|
| 703 | <xsd:element name="calibrationProtocol" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 704 | <xsd:annotation> |
---|
| 705 | <xsd:documentation>This may be a standard protocol, or a software application.</xsd:documentation> |
---|
| 706 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 707 | </xsd:annotation> |
---|
| 708 | </xsd:element> |
---|
| 709 | <xsd:element name="parameter" type="witsml:q_cs_dtsCalibrationParameter" minOccurs="0" maxOccurs="unbounded"> |
---|
| 710 | <xsd:annotation> |
---|
| 711 | <xsd:documentation>Attribute name is the name of the parameter. Optional attribute uom is the unit of measure of the parameter. The value of the element is the |
---|
| 712 | value of the parameter. Note that a string value may appear as a parameter.</xsd:documentation> |
---|
| 713 | </xsd:annotation> |
---|
| 714 | </xsd:element> |
---|
| 715 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 716 | <xsd:annotation> |
---|
| 717 | <xsd:documentation>Any remarks that may be useful, regarding the calibration information.</xsd:documentation> |
---|
| 718 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 719 | </xsd:annotation> |
---|
| 720 | </xsd:element> |
---|
| 721 | <xsd:element name="offsetTemperatureCalibration" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 722 | <xsd:annotation> |
---|
| 723 | <xsd:documentation>The temperature offset correction that is applied to the dts instrument box.</xsd:documentation> |
---|
| 724 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
| 725 | </xsd:annotation> |
---|
| 726 | </xsd:element> |
---|
| 727 | <xsd:element name="slopeCalibration" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 728 | <xsd:annotation> |
---|
| 729 | <xsd:documentation>The temperature slope correction that is applied to the dts instrument box.</xsd:documentation> |
---|
| 730 | <xsd:appinfo>constraints:@type="witsml:q_temperatureSlopeMeasure"</xsd:appinfo> |
---|
| 731 | </xsd:annotation> |
---|
| 732 | </xsd:element> |
---|
| 733 | </xsd:sequence> |
---|
| 734 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 735 | <xsd:annotation> |
---|
| 736 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 737 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 738 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 739 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 740 | </xsd:annotation> |
---|
| 741 | </xsd:attribute> |
---|
| 742 | </xsd:complexType> |
---|
| 743 | <xsd:complexType name="q_cs_dtsOneWayLoss"> |
---|
| 744 | <xsd:annotation> |
---|
| 745 | <xsd:documentation>The The power loss for one way travel of a beam of light, usually measured in decibels per unit length. It is necessary to include both the value (and |
---|
| 746 | its unit) and the wavelength. The wavelength varies with the refractive index, while the frequency remains constant. The wavelength given to specify this type is the |
---|
| 747 | wavelength in a vacuum (refractive index = 1).</xsd:documentation> |
---|
| 748 | </xsd:annotation> |
---|
| 749 | <xsd:sequence> |
---|
| 750 | <xsd:element name="value" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 751 | <xsd:annotation> |
---|
| 752 | <xsd:documentation>The value of the one way loss per unit of length. The usual uom is decibels per kilometre (dB/km), although this might vary depending on the |
---|
| 753 | calibration method used.</xsd:documentation> |
---|
| 754 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
| 755 | </xsd:annotation> |
---|
| 756 | </xsd:element> |
---|
| 757 | <xsd:element name="frequency" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 758 | <xsd:annotation> |
---|
| 759 | <xsd:documentation>The frequency (and uom) for which the one-way loss is measured.</xsd:documentation> |
---|
| 760 | <xsd:appinfo>constraints:@type="witsml:q_frequencyMeasure"</xsd:appinfo> |
---|
| 761 | </xsd:annotation> |
---|
| 762 | </xsd:element> |
---|
| 763 | <xsd:element name="wavelength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 764 | <xsd:annotation> |
---|
| 765 | <xsd:documentation>The wavelength (and uom) for which the one-way loss is measured. The reported wavelength should be the wavelength of the light in a |
---|
| 766 | vacuum.</xsd:documentation> |
---|
| 767 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 768 | </xsd:annotation> |
---|
| 769 | </xsd:element> |
---|
| 770 | </xsd:sequence> |
---|
| 771 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 772 | <xsd:annotation> |
---|
| 773 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 774 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 775 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 776 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 777 | </xsd:annotation> |
---|
| 778 | </xsd:attribute> |
---|
| 779 | </xsd:complexType> |
---|
| 780 | <xsd:complexType name="q_cs_dtsOtdr"> |
---|
| 781 | <xsd:annotation> |
---|
| 782 | <xsd:documentation>This records the result arrays, along with context information, from an Optical Time Domain Reflectometry (OTDR) run. The arrays will define the |
---|
| 783 | relative scattered power from the Rayleigh scattering vs distance along the fiber. The actual data values are recorded in a wellLog object, which is referenced in a |
---|
| 784 | subelement.</xsd:documentation> |
---|
| 785 | </xsd:annotation> |
---|
| 786 | <xsd:sequence> |
---|
| 787 | <xsd:element name="reasonForRun" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 788 | <xsd:annotation> |
---|
| 789 | <xsd:documentation>The reason the OTDR test was run. The three main reasons are 'pre-installation', which is before the installation of the fiber; |
---|
| 790 | 'post-installation', which is used to validate a successful fiber installation; and 'DTS run', which is a quality check of the fiber prior to a DTS run. A fourth |
---|
| 791 | permitted value is 'other'.</xsd:documentation> |
---|
| 792 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_OTDRReason",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 793 | </xsd:annotation> |
---|
| 794 | </xsd:element> |
---|
| 795 | <xsd:element name="dTimRun" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 796 | <xsd:annotation> |
---|
| 797 | <xsd:documentation>The dateTime of the run.</xsd:documentation> |
---|
| 798 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 799 | </xsd:annotation> |
---|
| 800 | </xsd:element> |
---|
| 801 | <xsd:element name="dataInWellLog" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 802 | <xsd:annotation> |
---|
| 803 | <xsd:documentation>A reference to the well log used to record the table of data.</xsd:documentation> |
---|
| 804 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 805 | </xsd:annotation> |
---|
| 806 | </xsd:element> |
---|
| 807 | <xsd:element name="fiberEndConncected" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 808 | <xsd:annotation> |
---|
| 809 | <xsd:documentation>A pointer to the fiber connection node. If more than one node is available for a well/wellbore, this element is used to specify which node is |
---|
| 810 | connected to the instrument box. This name should correspond to the fiberEndPoint/name that is recorded in the installed system object.</xsd:documentation> |
---|
| 811 | </xsd:annotation> |
---|
| 812 | </xsd:element> |
---|
| 813 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 814 | <xsd:annotation> |
---|
| 815 | <xsd:documentation>A general comment about the OTDR run.</xsd:documentation> |
---|
| 816 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 817 | </xsd:annotation> |
---|
| 818 | </xsd:element> |
---|
| 819 | </xsd:sequence> |
---|
| 820 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 821 | <xsd:annotation> |
---|
| 822 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 823 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 824 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 825 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 826 | </xsd:annotation> |
---|
| 827 | </xsd:attribute> |
---|
| 828 | </xsd:complexType> |
---|
| 829 | <!--UNUSED: Deleted type cs_dtsProcessedWellLog.--> |
---|
| 830 | <xsd:complexType name="q_cs_dtsPumpActivity"> |
---|
| 831 | <xsd:annotation> |
---|
| 832 | <xsd:documentation>The activity of pumping the fiber downhole.</xsd:documentation> |
---|
| 833 | </xsd:annotation> |
---|
| 834 | <xsd:sequence> |
---|
| 835 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 836 | <xsd:annotation> |
---|
| 837 | <xsd:documentation>A name which can be used to reference the pumping activity. In general, a pumping activity does not have a natural name, so that this element |
---|
| 838 | will not be often used.</xsd:documentation> |
---|
| 839 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 840 | </xsd:annotation> |
---|
| 841 | </xsd:element> |
---|
| 842 | <xsd:element name="installedFiber" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 843 | <xsd:annotation> |
---|
| 844 | <xsd:documentation>The name of the InstalledFiberInstance that this activity relates to.</xsd:documentation> |
---|
| 845 | </xsd:annotation> |
---|
| 846 | </xsd:element> |
---|
| 847 | <xsd:element name="pumpingDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 848 | <xsd:annotation> |
---|
| 849 | <xsd:documentation>The date of the pumping activity.</xsd:documentation> |
---|
| 850 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 851 | </xsd:annotation> |
---|
| 852 | </xsd:element> |
---|
| 853 | <xsd:element name="engineerName" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 854 | <xsd:annotation> |
---|
| 855 | <xsd:documentation>The person in charge of the pumping activity.</xsd:documentation> |
---|
| 856 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 857 | </xsd:annotation> |
---|
| 858 | </xsd:element> |
---|
| 859 | <xsd:element name="serviceCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 860 | <xsd:annotation> |
---|
| 861 | <xsd:documentation>The company that performed the pumping activity.</xsd:documentation> |
---|
| 862 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 863 | </xsd:annotation> |
---|
| 864 | </xsd:element> |
---|
| 865 | <xsd:element name="pumpFluidType" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 866 | <xsd:annotation> |
---|
| 867 | <xsd:documentation>The type of fluid used in the pump.</xsd:documentation> |
---|
| 868 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 869 | </xsd:annotation> |
---|
| 870 | </xsd:element> |
---|
| 871 | <xsd:element name="controlLineFluid" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 872 | <xsd:annotation> |
---|
| 873 | <xsd:documentation>The type of fluid used in the control line.</xsd:documentation> |
---|
| 874 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 875 | </xsd:annotation> |
---|
| 876 | </xsd:element> |
---|
| 877 | <xsd:element name="pumpDirection" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 878 | <xsd:annotation> |
---|
| 879 | <xsd:documentation>The direction of the pumping.</xsd:documentation> |
---|
| 880 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 881 | </xsd:annotation> |
---|
| 882 | </xsd:element> |
---|
| 883 | <xsd:element name="fiberEndSeal" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 884 | <xsd:annotation> |
---|
| 885 | <xsd:documentation>The type of end seal on the fiber.</xsd:documentation> |
---|
| 886 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 887 | </xsd:annotation> |
---|
| 888 | </xsd:element> |
---|
| 889 | <xsd:element name="cableMeterType" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 890 | <xsd:annotation> |
---|
| 891 | <xsd:documentation>The type of cable meter.</xsd:documentation> |
---|
| 892 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 893 | </xsd:annotation> |
---|
| 894 | </xsd:element> |
---|
| 895 | <xsd:element name="cableMeterSerialNumber" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 896 | <xsd:annotation> |
---|
| 897 | <xsd:documentation>The serial number of the cable meter.</xsd:documentation> |
---|
| 898 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 899 | </xsd:annotation> |
---|
| 900 | </xsd:element> |
---|
| 901 | <xsd:element name="cableMeterCalibrationDate" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 902 | <xsd:annotation> |
---|
| 903 | <xsd:documentation>The date the cable meter was calibrated.</xsd:documentation> |
---|
| 904 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 905 | </xsd:annotation> |
---|
| 906 | </xsd:element> |
---|
| 907 | <xsd:element name="wasDriftRunPerformed" type="witsml:q_booleanTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 908 | <xsd:annotation> |
---|
| 909 | <xsd:documentation>True or False. Was a drift run performed? This element should be used to indicate if a drift run was performed or not, where the instance of the |
---|
| 910 | drift run (OTDR) is not available. If the OTDR is available, use the OTDRPerformed element to specify the OTDR instance.</xsd:documentation> |
---|
| 911 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
| 912 | </xsd:annotation> |
---|
| 913 | </xsd:element> |
---|
| 914 | <xsd:element name="OTDRPerformed" type="witsml:q_refNameString" minOccurs="0" maxOccurs="unbounded"> |
---|
| 915 | <xsd:annotation> |
---|
| 916 | <xsd:documentation>A reference to the OTDR that was run. If an OTDR was run, but there is not instance of the OTDR to reference, choose the wasDriftRunPerformed |
---|
| 917 | element, and set it to True.</xsd:documentation> |
---|
| 918 | </xsd:annotation> |
---|
| 919 | </xsd:element> |
---|
| 920 | <xsd:element name="excessFiberRecovered" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 921 | <xsd:annotation> |
---|
| 922 | <xsd:documentation>The length of the excess fiber that was removed.</xsd:documentation> |
---|
| 923 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 924 | </xsd:annotation> |
---|
| 925 | </xsd:element> |
---|
| 926 | <xsd:element name="pumpLog" type="witsml:q_cs_dtsPumpLogTable" minOccurs="0" maxOccurs="1"> |
---|
| 927 | <xsd:annotation> |
---|
| 928 | <xsd:documentation>Information about the pumping activity, that is captured in the pump log.</xsd:documentation> |
---|
| 929 | </xsd:annotation> |
---|
| 930 | </xsd:element> |
---|
| 931 | </xsd:sequence> |
---|
| 932 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 933 | <xsd:annotation> |
---|
| 934 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 935 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 936 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 937 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 938 | </xsd:annotation> |
---|
| 939 | </xsd:attribute> |
---|
| 940 | </xsd:complexType> |
---|
| 941 | <xsd:complexType name="q_cs_dtsPumpLogRow"> |
---|
| 942 | <xsd:annotation> |
---|
| 943 | <xsd:documentation>The pump log row are elements defined in the sequence below.</xsd:documentation> |
---|
| 944 | </xsd:annotation> |
---|
| 945 | <xsd:sequence> |
---|
| 946 | <xsd:element name="cableSpeed" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 947 | <xsd:annotation> |
---|
| 948 | <xsd:documentation>The speed of the cable.</xsd:documentation> |
---|
| 949 | <xsd:appinfo>constraints:@type="witsml:q_velocityMeasure"</xsd:appinfo> |
---|
| 950 | </xsd:annotation> |
---|
| 951 | </xsd:element> |
---|
| 952 | <xsd:element name="fiberPumpedLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 953 | <xsd:annotation> |
---|
| 954 | <xsd:documentation>The length of fiber pumped into the wellbore.</xsd:documentation> |
---|
| 955 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 956 | </xsd:annotation> |
---|
| 957 | </xsd:element> |
---|
| 958 | <xsd:element name="pumpPressure" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 959 | <xsd:annotation> |
---|
| 960 | <xsd:documentation>The operating pressure of the pump.</xsd:documentation> |
---|
| 961 | <xsd:appinfo>constraints:@type="witsml:q_pressureMeasure"</xsd:appinfo> |
---|
| 962 | </xsd:annotation> |
---|
| 963 | </xsd:element> |
---|
| 964 | <xsd:element name="pumpFluid" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 965 | <xsd:annotation> |
---|
| 966 | <xsd:documentation>The fluid used in the pumping operation.</xsd:documentation> |
---|
| 967 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 968 | </xsd:annotation> |
---|
| 969 | </xsd:element> |
---|
| 970 | <xsd:element name="temperatureIn" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 971 | <xsd:annotation> |
---|
| 972 | <xsd:documentation>The temperature going into the wellbore.</xsd:documentation> |
---|
| 973 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
| 974 | </xsd:annotation> |
---|
| 975 | </xsd:element> |
---|
| 976 | <xsd:element name="temperatureOut" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 977 | <xsd:annotation> |
---|
| 978 | <xsd:documentation>The temperature at the end of the operation</xsd:documentation> |
---|
| 979 | <xsd:appinfo>constraints:@type="witsml:q_thermodynamicTemperatureMeasure"</xsd:appinfo> |
---|
| 980 | </xsd:annotation> |
---|
| 981 | </xsd:element> |
---|
| 982 | <xsd:element name="remarks" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 983 | <xsd:annotation> |
---|
| 984 | <xsd:documentation>Any general remarks about the pumping operation.</xsd:documentation> |
---|
| 985 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 986 | </xsd:annotation> |
---|
| 987 | </xsd:element> |
---|
| 988 | </xsd:sequence> |
---|
| 989 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 990 | <xsd:annotation> |
---|
| 991 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 992 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 993 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 994 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 995 | </xsd:annotation> |
---|
| 996 | </xsd:attribute> |
---|
| 997 | </xsd:complexType> |
---|
| 998 | <xsd:complexType name="q_cs_dtsPumpLogTable"> |
---|
| 999 | <xsd:annotation> |
---|
| 1000 | <xsd:documentation>Data type supporting a pump log for DST fiber installation data.</xsd:documentation> |
---|
| 1001 | </xsd:annotation> |
---|
| 1002 | <xsd:sequence> |
---|
| 1003 | <xsd:element name="tableRow" type="witsml:q_cs_dtsPumpLogRow" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1004 | <xsd:annotation> |
---|
| 1005 | <xsd:documentation>This is a row of the pump log table.</xsd:documentation> |
---|
| 1006 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 1007 | </xsd:annotation> |
---|
| 1008 | </xsd:element> |
---|
| 1009 | </xsd:sequence> |
---|
| 1010 | </xsd:complexType> |
---|
| 1011 | <xsd:complexType name="q_cs_dtsRefractiveIndex"> |
---|
| 1012 | <xsd:annotation> |
---|
| 1013 | <xsd:documentation>The refractive index of a material depends on the frequency or wavelength of the light. Hence it is necessary to include both the value (a unitless |
---|
| 1014 | number) and the frequency or wavelength. The frequency will be a quantity type with a frequency unit, such as Hz, kHz, or MHz. The wavelength will be a quantity type with |
---|
| 1015 | a length unit, such as m, cm, um, in, or ft.</xsd:documentation> |
---|
| 1016 | </xsd:annotation> |
---|
| 1017 | <xsd:sequence> |
---|
| 1018 | <xsd:element name="value" type="witsml:q_doubleTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1019 | <xsd:annotation> |
---|
| 1020 | <xsd:documentation>The value of the refractive index.</xsd:documentation> |
---|
| 1021 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_unitlessQuantity",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1022 | </xsd:annotation> |
---|
| 1023 | </xsd:element> |
---|
| 1024 | <xsd:element name="frequency" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 1025 | <xsd:annotation> |
---|
| 1026 | <xsd:documentation>The frequency (and uom) for which the refractive index is measured.</xsd:documentation> |
---|
| 1027 | <xsd:appinfo>constraints:@type="witsml:q_frequencyMeasure"</xsd:appinfo> |
---|
| 1028 | </xsd:annotation> |
---|
| 1029 | </xsd:element> |
---|
| 1030 | <xsd:element name="wavelength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 1031 | <xsd:annotation> |
---|
| 1032 | <xsd:documentation>The wavelength (and uom) for which the refractive index is measured. The reported wavelength should be the wavelength of the light in a |
---|
| 1033 | vacuum.</xsd:documentation> |
---|
| 1034 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 1035 | </xsd:annotation> |
---|
| 1036 | </xsd:element> |
---|
| 1037 | </xsd:sequence> |
---|
| 1038 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 1039 | <xsd:annotation> |
---|
| 1040 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 1041 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 1042 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 1043 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1044 | </xsd:annotation> |
---|
| 1045 | </xsd:attribute> |
---|
| 1046 | </xsd:complexType> |
---|
| 1047 | <xsd:complexType name="q_cs_dtsSingleInstalledPoint"> |
---|
| 1048 | <xsd:annotation> |
---|
| 1049 | <xsd:documentation>A set of points recorded during the installation process. The information can include the length along the fiber, the measured depth, and a type of |
---|
| 1050 | point.</xsd:documentation> |
---|
| 1051 | </xsd:annotation> |
---|
| 1052 | <xsd:sequence> |
---|
| 1053 | <xsd:element name="md" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
| 1054 | <xsd:annotation> |
---|
| 1055 | <xsd:documentation>The measured depth of the installed point of the fiber. This is optional, because the sender may want to record points that are outside the |
---|
| 1056 | well.</xsd:documentation> |
---|
| 1057 | <xsd:appinfo>constraints:@type="witsml:q_measuredDepthCoord"</xsd:appinfo> |
---|
| 1058 | </xsd:annotation> |
---|
| 1059 | </xsd:element> |
---|
| 1060 | <xsd:element name="lengthAlongFiber" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 1061 | <xsd:annotation> |
---|
| 1062 | <xsd:documentation>The length along the fiber, from the zero point, for this particular point.</xsd:documentation> |
---|
| 1063 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 1064 | </xsd:annotation> |
---|
| 1065 | </xsd:element> |
---|
| 1066 | <xsd:element name="type" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1067 | <xsd:annotation> |
---|
| 1068 | <xsd:documentation>The type of point that is being recorded.</xsd:documentation> |
---|
| 1069 | <xsd:appinfo>constraints:@type="witsml:q_InstalledFiberPoint",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1070 | </xsd:annotation> |
---|
| 1071 | </xsd:element> |
---|
| 1072 | </xsd:sequence> |
---|
| 1073 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 1074 | <xsd:annotation> |
---|
| 1075 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 1076 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 1077 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 1078 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1079 | </xsd:annotation> |
---|
| 1080 | </xsd:attribute> |
---|
| 1081 | </xsd:complexType> |
---|
| 1082 | <!--UNUSED: Deleted type cs_fluidResultCceTestStep.--> |
---|
| 1083 | <!--UNUSED: Deleted type cs_fluidResultCompositeComposition.--> |
---|
| 1084 | <!--UNUSED: Deleted type cs_fluidResultComposition.--> |
---|
| 1085 | <!--UNUSED: Deleted type cs_fluidResultConstantCompositionExpansionTest.--> |
---|
| 1086 | <!--UNUSED: Deleted type cs_fluidResultConstantVolumeDepletionTest.--> |
---|
| 1087 | <!--UNUSED: Deleted type cs_fluidResultContaminant.--> |
---|
| 1088 | <!--UNUSED: Deleted type cs_fluidResultCvdTestStep.--> |
---|
| 1089 | <!--UNUSED: Deleted type cs_fluidResultDataQuality.--> |
---|
| 1090 | <!--UNUSED: Deleted type cs_fluidResultDifferentialLiberationTest.--> |
---|
| 1091 | <!--UNUSED: Deleted type cs_fluidResultDifferentialLiberationTestStep.--> |
---|
| 1092 | <!--UNUSED: Deleted type cs_fluidResultJCurveTest.--> |
---|
| 1093 | <!--UNUSED: Deleted type cs_fluidResultJCurveTestStep.--> |
---|
| 1094 | <!--UNUSED: Deleted type cs_fluidResultPhaseComposition.--> |
---|
| 1095 | <!--UNUSED: Deleted type cs_fluidResultSaturationTest.--> |
---|
| 1096 | <!--UNUSED: Deleted type cs_fluidResultSaturationTestStep.--> |
---|
| 1097 | <!--UNUSED: Deleted type cs_fluidResultSeparatorTest.--> |
---|
| 1098 | <!--UNUSED: Deleted type cs_fluidResultSeparatorTestStep.--> |
---|
| 1099 | <!--UNUSED: Deleted type cs_fluidResultStockTank.--> |
---|
| 1100 | <!--UNUSED: Deleted type cs_fluidResultTransportPropertiesTest.--> |
---|
| 1101 | <!--UNUSED: Deleted type cs_fluidResultTransportTestStep.--> |
---|
| 1102 | <!--UNUSED: Deleted type cs_fluidResultVolumeReference.--> |
---|
| 1103 | <!--UNUSED: Deleted type cs_generalAddress.--> |
---|
| 1104 | <!--UNUSED: Deleted type cs_geographicContext.--> |
---|
| 1105 | <xsd:complexType name="q_cs_nameTag"> |
---|
| 1106 | <xsd:annotation> |
---|
| 1107 | <xsd:documentation>WITSML - Equipment NameTag Schema</xsd:documentation> |
---|
| 1108 | </xsd:annotation> |
---|
| 1109 | <xsd:sequence> |
---|
| 1110 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1111 | <xsd:annotation> |
---|
| 1112 | <xsd:documentation>The physical identification string of the equipment tag.</xsd:documentation> |
---|
| 1113 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1114 | </xsd:annotation> |
---|
| 1115 | </xsd:element> |
---|
| 1116 | <xsd:element name="numberingScheme" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1117 | <xsd:annotation> |
---|
| 1118 | <xsd:documentation>The format or encoding specification of the equipment tag. The tag may contain may different pieces of information and knowledge of that |
---|
| 1119 | information is inherent in the specification. The "identification string" is a mandatory part of the information in a tag.</xsd:documentation> |
---|
| 1120 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_NameTagNumberingScheme",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1121 | </xsd:annotation> |
---|
| 1122 | </xsd:element> |
---|
| 1123 | <xsd:element name="technology" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1124 | <xsd:annotation> |
---|
| 1125 | <xsd:documentation>Identifies the general type of identifier on an item. If multiple identifiers exist on an item, a separate description set for each identifier |
---|
| 1126 | should be created. For example, a joint of casing may have a barcode label on it along with a painted-on code and an RFID tag attached or embedded into the |
---|
| 1127 | coupling. The barcode label may in turn be an RFID equipped label. This particular scenario would require populating five nameTags to fully describe and decode all |
---|
| 1128 | the possible identifiers as follows: 'tagged' - RFID tag embedded in the coupling, 'label' - Serial number printed on the label, 'tagged' - RFID tag embedded into |
---|
| 1129 | the label, 'label' - Barcode printed on the label, 'painted'- Mill number painted on the pipe body.</xsd:documentation> |
---|
| 1130 | <xsd:appinfo>constraints:@type="witsml:q_NameTagTechnology",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1131 | </xsd:annotation> |
---|
| 1132 | </xsd:element> |
---|
| 1133 | <xsd:element name="location" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1134 | <xsd:annotation> |
---|
| 1135 | <xsd:documentation>An indicator of where the tag is attached to the item. This is used to assist the user in finding where an identifier is located on an item. This |
---|
| 1136 | optional field also helps to differentiate where an identifier is located when multiple identifiers exist on an item. Most downhole components have a box (female |
---|
| 1137 | thread) and pin (male thread) end as well as a pipe body in between the ends. Where multiple identifiers are used on an item, it is convenient to have a reference |
---|
| 1138 | as to which end, or somewhere in the middle, an identifier may be closer to. Some items may have an identifier on a non-standard location, such as on the arm of a |
---|
| 1139 | hole opener. 'other', by exclusion, tells a user to look elsewhere than on the body or near the ends of an item. Most non-downhole tools will use either 'body', |
---|
| 1140 | 'other' or not specified as the location tends to lose value with smaller or non threaded items.</xsd:documentation> |
---|
| 1141 | <xsd:appinfo>constraints:@type="witsml:q_NameTagLocation",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1142 | </xsd:annotation> |
---|
| 1143 | </xsd:element> |
---|
| 1144 | <xsd:element name="installationDate" type="witsml:q_dateTimeTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1145 | <xsd:annotation> |
---|
| 1146 | <xsd:documentation>When the tag was installed in or on the item.</xsd:documentation> |
---|
| 1147 | <xsd:appinfo>constraints:@type="witsml:q_timestamp",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1148 | </xsd:annotation> |
---|
| 1149 | </xsd:element> |
---|
| 1150 | <xsd:element name="installationCompany" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1151 | <xsd:annotation> |
---|
| 1152 | <xsd:documentation>The name of the company that installed the tag.</xsd:documentation> |
---|
| 1153 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1154 | </xsd:annotation> |
---|
| 1155 | </xsd:element> |
---|
| 1156 | <xsd:element name="mountingCode" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1157 | <xsd:annotation> |
---|
| 1158 | <xsd:documentation>Reference to a manufacturers or installers installation description, code, or method.</xsd:documentation> |
---|
| 1159 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1160 | </xsd:annotation> |
---|
| 1161 | </xsd:element> |
---|
| 1162 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1163 | <xsd:annotation> |
---|
| 1164 | <xsd:documentation>A comment or remark about the tag.</xsd:documentation> |
---|
| 1165 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1166 | </xsd:annotation> |
---|
| 1167 | </xsd:element> |
---|
| 1168 | </xsd:sequence> |
---|
| 1169 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 1170 | <xsd:annotation> |
---|
| 1171 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 1172 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 1173 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 1174 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1175 | </xsd:annotation> |
---|
| 1176 | </xsd:attribute> |
---|
| 1177 | </xsd:complexType> |
---|
| 1178 | <!--UNUSED: Deleted type cs_northSeaOffshore.--> |
---|
| 1179 | <!--UNUSED: Deleted type cs_offshoreLocation.--> |
---|
| 1180 | <!--UNUSED: Deleted type cs_personName.--> |
---|
| 1181 | <!--UNUSED: Deleted type cs_productFlowChangeLog.--> |
---|
| 1182 | <!--UNUSED: Deleted type cs_productFlowExpectedPortProperty.--> |
---|
| 1183 | <!--UNUSED: Deleted type cs_productFlowExpectedUnitProperty.--> |
---|
| 1184 | <!--UNUSED: Deleted type cs_productFlowExternalReference.--> |
---|
| 1185 | <!--UNUSED: Deleted type cs_productFlowlExternalPort.--> |
---|
| 1186 | <!--UNUSED: Deleted type cs_productFlowNetwork.--> |
---|
| 1187 | <!--UNUSED: Deleted type cs_productFlowNetworkPlan.--> |
---|
| 1188 | <!--UNUSED: Deleted type cs_productFlowPort.--> |
---|
| 1189 | <!--UNUSED: Deleted type cs_productFlowQualifierExpected.--> |
---|
| 1190 | <!--UNUSED: Deleted type cs_productFlowUnit.--> |
---|
| 1191 | <!--UNUSED: Deleted type cs_productionOperationActivity.--> |
---|
| 1192 | <!--UNUSED: Deleted type cs_productionOperationAlarm.--> |
---|
| 1193 | <!--UNUSED: Deleted type cs_productionOperationCargoShipOperation.--> |
---|
| 1194 | <!--UNUSED: Deleted type cs_productionOperationHSE.--> |
---|
| 1195 | <!--UNUSED: Deleted type cs_productionOperationInstallationReport.--> |
---|
| 1196 | <!--UNUSED: Deleted type cs_productionOperationLostProduction.--> |
---|
| 1197 | <!--UNUSED: Deleted type cs_productionOperationMarineOperation.--> |
---|
| 1198 | <!--UNUSED: Deleted type cs_productionOperationOperationalComment.--> |
---|
| 1199 | <!--UNUSED: Deleted type cs_productionOperationSafety.--> |
---|
| 1200 | <!--UNUSED: Deleted type cs_productionOperationShutdown.--> |
---|
| 1201 | <!--UNUSED: Deleted type cs_productionOperationThirdPartyProcessing.--> |
---|
| 1202 | <!--UNUSED: Deleted type cs_productionOperationWaterCleaningQuality.--> |
---|
| 1203 | <!--UNUSED: Deleted type cs_productionOperationWeather.--> |
---|
| 1204 | <!--UNUSED: Deleted type cs_productVolumeAlert.--> |
---|
| 1205 | <!--UNUSED: Deleted type cs_productVolumeBusinessUnit.--> |
---|
| 1206 | <!--UNUSED: Deleted type cs_productVolumeBusinessSubUnit.--> |
---|
| 1207 | <!--UNUSED: Deleted type cs_productVolumeBusinessOwnershipShare.--> |
---|
| 1208 | <!--UNUSED: Deleted type cs_productVolumeBusinessAccountInfo.--> |
---|
| 1209 | <!--UNUSED: Deleted type BusinessUnitKind.--> |
---|
| 1210 | <!--UNUSED: Deleted type cs_productVolumeComponentContent.--> |
---|
| 1211 | <!--UNUSED: Deleted type cs_productVolumeFacility.--> |
---|
| 1212 | <!--UNUSED: Deleted type cs_productVolumeFlow.--> |
---|
| 1213 | <!--UNUSED: Deleted type cs_productVolumeParameterSet.--> |
---|
| 1214 | <!--UNUSED: Deleted type cs_productVolumeParameterValue.--> |
---|
| 1215 | <!--UNUSED: Deleted type cs_productVolumePeriod.--> |
---|
| 1216 | <!--UNUSED: Deleted type q_cs_productVolumePortDifference.--> |
---|
| 1217 | <!--UNUSED: Deleted type cs_productVolumeProduct.--> |
---|
| 1218 | <!--UNUSED: Deleted type cs_productVolumeRelatedFacility.--> |
---|
| 1219 | <!--UNUSED: Deleted type cs_productVolumeSalesSet.--> |
---|
| 1220 | <!--UNUSED: Deleted type cs_productVolumeSalesDetail.--> |
---|
| 1221 | <!--UNUSED: Deleted type cs_productVolumeDestination.--> |
---|
| 1222 | <!--UNUSED: Deleted type cs_productVolumeSaleEvent.--> |
---|
| 1223 | <!--UNUSED: Deleted type SaleEventKind.--> |
---|
| 1224 | <!--UNUSED: Deleted type SalesFlowPart.--> |
---|
| 1225 | <!--UNUSED: Deleted type SaleDestinationType.--> |
---|
| 1226 | <!--UNUSED: Deleted type cs_refProductFlow.--> |
---|
| 1227 | <xsd:complexType name="q_cs_refWellWellbore"> |
---|
| 1228 | <xsd:annotation> |
---|
| 1229 | <xsd:documentation>Data that represents a foreign key to a wellbore. The wellbore may be defined within the context of another well.</xsd:documentation> |
---|
| 1230 | </xsd:annotation> |
---|
| 1231 | <xsd:sequence> |
---|
| 1232 | <xsd:element name="wellboreReference" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1233 | <xsd:annotation> |
---|
| 1234 | <xsd:documentation>A pointer the wellbore with which there is a relationship.</xsd:documentation> |
---|
| 1235 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 1236 | </xsd:annotation> |
---|
| 1237 | </xsd:element> |
---|
| 1238 | <xsd:element name="wellParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1239 | <xsd:annotation> |
---|
| 1240 | <xsd:documentation>A pointer to the well that contains the wellboreReference. This is not needed unless the referenced wellbore is outside the context of a common |
---|
| 1241 | parent well.</xsd:documentation> |
---|
| 1242 | </xsd:annotation> |
---|
| 1243 | </xsd:element> |
---|
| 1244 | </xsd:sequence> |
---|
| 1245 | </xsd:complexType> |
---|
| 1246 | <xsd:complexType name="q_cs_refWellWellboreRig"> |
---|
| 1247 | <xsd:annotation> |
---|
| 1248 | <xsd:documentation>A reference to a rig within a wellbore. The wellbore may be defined within the context of another well. This value represents a foreign key from one |
---|
| 1249 | node to another.</xsd:documentation> |
---|
| 1250 | </xsd:annotation> |
---|
| 1251 | <xsd:sequence> |
---|
| 1252 | <xsd:element name="rigReference" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1253 | <xsd:annotation> |
---|
| 1254 | <xsd:documentation>A pointer to the rig with which there is a relationship.</xsd:documentation> |
---|
| 1255 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 1256 | </xsd:annotation> |
---|
| 1257 | </xsd:element> |
---|
| 1258 | <xsd:element name="wellboreParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1259 | <xsd:annotation> |
---|
| 1260 | <xsd:documentation>A pointer to the wellbore that contains the rigReference. This is not needed unless the referenced rig is outside the context of a common parent |
---|
| 1261 | wellbore.</xsd:documentation> |
---|
| 1262 | </xsd:annotation> |
---|
| 1263 | </xsd:element> |
---|
| 1264 | <xsd:element name="wellParent" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1265 | <xsd:annotation> |
---|
| 1266 | <xsd:documentation>A pointer to the well that contains the wellboreParent. This is not needed unless the referenced wellbore is outside the context of a common |
---|
| 1267 | parent well.</xsd:documentation> |
---|
| 1268 | </xsd:annotation> |
---|
| 1269 | </xsd:element> |
---|
| 1270 | </xsd:sequence> |
---|
| 1271 | </xsd:complexType> |
---|
| 1272 | <!--UNUSED: Deleted type cs_relativeCoordinate.--> |
---|
| 1273 | <!--UNUSED: Deleted type q_cs_volumeValue.--> |
---|
| 1274 | <xsd:complexType name="q_cs_wellContext"> |
---|
| 1275 | <xsd:annotation> |
---|
| 1276 | <xsd:documentation>Within the context of a WITSML Server, this data should duplicate the equivalent information in the well object.</xsd:documentation> |
---|
| 1277 | </xsd:annotation> |
---|
| 1278 | <xsd:sequence> |
---|
| 1279 | <xsd:element name="field" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1280 | <xsd:annotation> |
---|
| 1281 | <xsd:documentation>Name of the field in which the well is located.</xsd:documentation> |
---|
| 1282 | </xsd:annotation> |
---|
| 1283 | </xsd:element> |
---|
| 1284 | <xsd:element name="wellAlias" type="witsml:q_nameStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1285 | <xsd:annotation> |
---|
| 1286 | <xsd:documentation>An alias name associated with the well. If the wellName is associated with a naming system then it should be included in this |
---|
| 1287 | list.</xsd:documentation> |
---|
| 1288 | </xsd:annotation> |
---|
| 1289 | </xsd:element> |
---|
| 1290 | <xsd:element name="wellDatum" type="witsml:q_cs_wellDatum" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1291 | <xsd:annotation> |
---|
| 1292 | <xsd:documentation>A datum to which elevations and depths are referenced.</xsd:documentation> |
---|
| 1293 | </xsd:annotation> |
---|
| 1294 | </xsd:element> |
---|
| 1295 | </xsd:sequence> |
---|
| 1296 | </xsd:complexType> |
---|
| 1297 | <xsd:complexType name="q_cs_wellDatum"> |
---|
| 1298 | <xsd:annotation> |
---|
| 1299 | <xsd:documentation>Defines the datums associated with elevation, vertical depth and measured depth coordinates within the context of a well.</xsd:documentation> |
---|
| 1300 | </xsd:annotation> |
---|
| 1301 | <xsd:sequence> |
---|
| 1302 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1303 | <xsd:annotation> |
---|
| 1304 | <xsd:documentation>The human understandable contextual name of the reference datum.</xsd:documentation> |
---|
| 1305 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1306 | </xsd:annotation> |
---|
| 1307 | </xsd:element> |
---|
| 1308 | <xsd:element name="code" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1309 | <xsd:annotation> |
---|
| 1310 | <xsd:documentation>The code value that represents the type of reference datum. This may represent a point on a device (e.g., kelly bushing) or it may represent a |
---|
| 1311 | vertical reference datum (e.g., mean sea level).</xsd:documentation> |
---|
| 1312 | <xsd:appinfo> |
---|
| 1313 | constraints:@type="witsml:q_ElevCodeEnum",xsd:enumeration="CF",xsd:enumeration="CV",xsd:enumeration="DF",xsd:enumeration="GL",xsd:enumeration="KB",xsd:enumeration="RB",xsd:enumeration="RT",xsd:enumeration="SF",xsd:enumeration="LAT",xsd:enumeration="SL",xsd:enumeration="MHHW",xsd:enumeration="MHW",xsd:enumeration="MLLW",xsd:enumeration="MLW",xsd:enumeration="MTL",xsd:enumeration="KO",xsd:enumeration="unknown",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1314 | </xsd:annotation> |
---|
| 1315 | </xsd:element> |
---|
| 1316 | <xsd:element name="datumName" type="witsml:q_wellKnownNameStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1317 | <xsd:annotation> |
---|
| 1318 | <xsd:documentation>The name of the vertical reference datum in a particular naming system. This should only be specified if the above 'code' represents some |
---|
| 1319 | variation of sea level. An optional short name (code) can also be specified. Specifying a well known datum is highly desired if the above code is a variant of sea |
---|
| 1320 | level because sea level varies over time and space. An example would be to specify a name of 'Caspian Sea' with a code of '5106' in the 'EPSG' naming |
---|
| 1321 | system.</xsd:documentation> |
---|
| 1322 | </xsd:annotation> |
---|
| 1323 | </xsd:element> |
---|
| 1324 | <xsd:element name="kind" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1325 | <xsd:annotation> |
---|
| 1326 | <xsd:documentation>Since various activities may use different points as measurement datums, it is useful to characterize the point based on its usage. A well |
---|
| 1327 | reference datum may have more than one such characterization. For example, it may be the datum used by the driller and logger for measuring their depths. Example |
---|
| 1328 | usage values would be 'permanent','driller', 'logger' 'WRP' (well reference point) and 'SRP' (site reference point).</xsd:documentation> |
---|
| 1329 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1330 | </xsd:annotation> |
---|
| 1331 | </xsd:element> |
---|
| 1332 | <xsd:element name="wellbore" type="witsml:q_cs_refWellWellbore" minOccurs="0" maxOccurs="1"> |
---|
| 1333 | <xsd:annotation> |
---|
| 1334 | <xsd:documentation>A pointer to the wellbore that contains the reference datum. This should be specified if a measured depth is given.</xsd:documentation> |
---|
| 1335 | </xsd:annotation> |
---|
| 1336 | </xsd:element> |
---|
| 1337 | <xsd:element name="rig" type="witsml:q_cs_refWellWellboreRig" minOccurs="0" maxOccurs="1"> |
---|
| 1338 | <xsd:annotation> |
---|
| 1339 | <xsd:documentation>A pointer to the rig that contains the device used as a reference datum. The rig may be associated with a wellbore in another well (e.g., pattern |
---|
| 1340 | drilling using a rig on a track).</xsd:documentation> |
---|
| 1341 | </xsd:annotation> |
---|
| 1342 | </xsd:element> |
---|
| 1343 | <xsd:element name="elevation" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
| 1344 | <xsd:annotation> |
---|
| 1345 | <xsd:documentation>The gravity based elevation coordinate of this reference datum as measured from another datum. Positive moving upward from the elevation datum. |
---|
| 1346 | An elevation should be given unless this is a vertical reference datum (e.g., sea level).</xsd:documentation> |
---|
| 1347 | <xsd:appinfo>constraints:@type="witsml:q_wellElevationCoord"</xsd:appinfo> |
---|
| 1348 | </xsd:annotation> |
---|
| 1349 | </xsd:element> |
---|
| 1350 | <xsd:element name="measuredDepth" type="witsml:q_verticalCoord" minOccurs="0" maxOccurs="1"> |
---|
| 1351 | <xsd:annotation> |
---|
| 1352 | <xsd:documentation>The measured depth coordinate of this reference datum as measured from another datum. The measured depth datum should either be the same as the |
---|
| 1353 | elevation datum or it should be relatable to the elevation datum through other datums. Positive moving toward the bottomhole from the measured depth datum. This |
---|
| 1354 | should be given when a local reference is "downhole", such as a kickoff point or ocean bottom template, and the borehole may not be vertical. If a Depth is given |
---|
| 1355 | then an Elevation should also be given.</xsd:documentation> |
---|
| 1356 | <xsd:appinfo>constraints:@type="witsml:q_measuredDepthCoord"</xsd:appinfo> |
---|
| 1357 | </xsd:annotation> |
---|
| 1358 | </xsd:element> |
---|
| 1359 | <xsd:element name="comment" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1360 | <xsd:annotation> |
---|
| 1361 | <xsd:documentation>A contextual description of the well reference datum.</xsd:documentation> |
---|
| 1362 | <xsd:appinfo>constraints:@type="witsml:q_commentString",xsd:maxLength="4000",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1363 | </xsd:annotation> |
---|
| 1364 | </xsd:element> |
---|
| 1365 | </xsd:sequence> |
---|
| 1366 | <xsd:attribute name="defaultMeasuredDepth" type="xsd:string" use="optional"> |
---|
| 1367 | <xsd:annotation> |
---|
| 1368 | <xsd:documentation>True indicates that this is the default reference datum for measured depth coordinates. False or not given indicates that this is not the default |
---|
| 1369 | reference datum. Measured depth coordinates that do not specify a datum reference should be assumed to be measured relative to this default reference datum. Only one |
---|
| 1370 | reference datum may be designated as the default measured depth datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
| 1371 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1372 | </xsd:annotation> |
---|
| 1373 | </xsd:attribute> |
---|
| 1374 | <xsd:attribute name="defaultVerticalDepth" type="xsd:string" use="optional"> |
---|
| 1375 | <xsd:annotation> |
---|
| 1376 | <xsd:documentation>True indicates that this is the default reference datum for vertical depth coordinates. False or not given indicates that this is not the default |
---|
| 1377 | reference datum. Vertical depth coordinates that do not specify a datum reference should be assumed to be measured relative to the default reference datum. Only one |
---|
| 1378 | reference datum may be designated as the default vertical depth datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
| 1379 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1380 | </xsd:annotation> |
---|
| 1381 | </xsd:attribute> |
---|
| 1382 | <xsd:attribute name="defaultElevation" type="xsd:string" use="optional"> |
---|
| 1383 | <xsd:annotation> |
---|
| 1384 | <xsd:documentation>True indicates that this is the default reference datum for elevation coordinates. False or not given indicates that this is not the default |
---|
| 1385 | reference datum. Elevation coordinates that do not specify a datum reference should be assumed to be measured relative to the default reference datum. Only one |
---|
| 1386 | reference datum may be designated as the default elevation datum for each well. Values are "true" (or "1") and "false" ( or "0").</xsd:documentation> |
---|
| 1387 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1388 | </xsd:annotation> |
---|
| 1389 | </xsd:attribute> |
---|
| 1390 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 1391 | <xsd:annotation> |
---|
| 1392 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 1393 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is only |
---|
| 1394 | required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 1395 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1396 | </xsd:annotation> |
---|
| 1397 | </xsd:attribute> |
---|
| 1398 | </xsd:complexType> |
---|
| 1399 | <!--UNUSED: Deleted type cs_wellTestBottomholeData.--> |
---|
| 1400 | <!--UNUSED: Deleted type cs_wellTestCumulative.--> |
---|
| 1401 | <!--UNUSED: Deleted type cs_wellTestFluidLevelTest.--> |
---|
| 1402 | <!--UNUSED: Deleted type cs_wellTestFluidRate.--> |
---|
| 1403 | <!--UNUSED: Deleted type cs_wellTestInjectionTestData.--> |
---|
| 1404 | <!--UNUSED: Deleted type cs_wellTestInjectionTestResults.--> |
---|
| 1405 | <!--UNUSED: Deleted type cs_wellTestInterval.--> |
---|
| 1406 | <!--UNUSED: Deleted type cs_wellTestPointData.--> |
---|
| 1407 | <!--UNUSED: Deleted type cs_wellTestProductionTestData.--> |
---|
| 1408 | <!--UNUSED: Deleted type cs_wellTestProductionTestResults.--> |
---|
| 1409 | <!--UNUSED: Deleted type cs_wellTestSeparatorData.--> |
---|
| 1410 | <!--UNUSED: Deleted type cs_wellTestTestVolume.--> |
---|
| 1411 | <!--UNUSED: Deleted type cs_wellTestWellheadData.--> |
---|
| 1412 | <!--UNUSED: Deleted type grp_commonPropertiesProductVolume.--> |
---|
| 1413 | <!--UNUSED: Deleted type grp_dtsMeasurement.--> |
---|
| 1414 | <!--UNUSED: Deleted type grp_fluidAnalysis.--> |
---|
| 1415 | <!--UNUSED: Deleted type grp_fluidAnalysisResult.--> |
---|
| 1416 | <!--UNUSED: Deleted type grp_fluidResultCommonTestGroup.--> |
---|
| 1417 | <!--UNUSED: Deleted type grp_fluidSample.--> |
---|
| 1418 | <!--UNUSED: Deleted type grp_productFlowModel.--> |
---|
| 1419 | <!--UNUSED: Deleted type grp_productionOperation.--> |
---|
| 1420 | <!--UNUSED: Deleted type grp_productVolume.--> |
---|
| 1421 | <!--UNUSED: Deleted type grp_wellTest.--> |
---|
| 1422 | <xsd:element name="dtsInstalledSystemQuerySet" type="witsml:q_obj_dtsInstalledSystems"> |
---|
| 1423 | <xsd:annotation> |
---|
| 1424 | <xsd:documentation>The WITSML API mandated plural root element which allows multiple singular objects to be sent. The plural name is formed by adding an "s" to the |
---|
| 1425 | singular name.</xsd:documentation> |
---|
| 1426 | </xsd:annotation> |
---|
| 1427 | </xsd:element> |
---|
| 1428 | <xsd:complexType name="q_obj_dtsInstalledSystems"> |
---|
| 1429 | <xsd:sequence> |
---|
| 1430 | <xsd:element name="documentInfo" type="witsml:q_cs_documentInfo" minOccurs="0" maxOccurs="1"> |
---|
| 1431 | <xsd:annotation> |
---|
| 1432 | <xsd:documentation>Information about the XML message instance.</xsd:documentation> |
---|
| 1433 | </xsd:annotation> |
---|
| 1434 | </xsd:element> |
---|
| 1435 | <xsd:element name="dtsInstalledSystem" type="witsml:q_obj_dtsInstalledSystem" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1436 | <xsd:annotation> |
---|
| 1437 | <xsd:documentation>Main wrapper for all the distributed temperature survey information about the installed system. Note that this can serve as a standalone object |
---|
| 1438 | for messages that are not part of the WITSML server architecture.</xsd:documentation> |
---|
| 1439 | <xsd:appinfo>constraints:@minOccurs="1"</xsd:appinfo> |
---|
| 1440 | </xsd:annotation> |
---|
| 1441 | </xsd:element> |
---|
| 1442 | </xsd:sequence> |
---|
| 1443 | <xsd:attribute name="version" type="xsd:string" use="optional"> |
---|
| 1444 | <xsd:annotation> |
---|
| 1445 | <xsd:documentation>Data object schema version. The fourth level must match the version of the schema constraints (enumerations and XML loader files) that are assumed |
---|
| 1446 | by the document instance.</xsd:documentation> |
---|
| 1447 | <xsd:appinfo> |
---|
| 1448 | constraints:@use="required",@type="witsml:q_schemaVersionString",xsd:maxLength="16",xsd:pattern="1\.0\.0\.[1-9]?[0-9]\(PRODML\)",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1449 | </xsd:annotation> |
---|
| 1450 | </xsd:attribute> |
---|
| 1451 | </xsd:complexType> |
---|
| 1452 | <xsd:complexType name="q_obj_dtsInstalledSystem"> |
---|
| 1453 | <xsd:complexContent> |
---|
| 1454 | <xsd:extension base="witsml:q_abstractSingularDataObject"> |
---|
| 1455 | <xsd:sequence> |
---|
| 1456 | <xsd:element name="nameWell" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1457 | <xsd:annotation> |
---|
| 1458 | <xsd:documentation>Human recognizable context for the well that contains the wellbore.</xsd:documentation> |
---|
| 1459 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1460 | </xsd:annotation> |
---|
| 1461 | </xsd:element> |
---|
| 1462 | <xsd:element name="nameWellbore" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1463 | <xsd:annotation> |
---|
| 1464 | <xsd:documentation>Human recognizable context for the wellbore that contains the installed system.</xsd:documentation> |
---|
| 1465 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1466 | </xsd:annotation> |
---|
| 1467 | </xsd:element> |
---|
| 1468 | <xsd:element name="name" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1469 | <xsd:annotation> |
---|
| 1470 | <xsd:documentation>Human recognizable context for the dts.</xsd:documentation> |
---|
| 1471 | <xsd:appinfo>constraints:@minOccurs="1",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1472 | </xsd:annotation> |
---|
| 1473 | </xsd:element> |
---|
| 1474 | <xsd:element name="dateMin" type="witsml:q_endpointQualifiedDate" minOccurs="0" maxOccurs="1"> |
---|
| 1475 | <xsd:annotation> |
---|
| 1476 | <xsd:documentation>The minimum date index contained within the object. The minimum and maximum indexes are server query parameters and will be populated with |
---|
| 1477 | valid values in a "get" result. That is, all measurements for a well in the specified period defined by the min/max. See the WITSML API Specification appendix |
---|
| 1478 | on "Special Handling" of growing objects for a description of the behavior related to this parameter.</xsd:documentation> |
---|
| 1479 | </xsd:annotation> |
---|
| 1480 | </xsd:element> |
---|
| 1481 | <xsd:element name="dateMax" type="witsml:q_endpointQualifiedDate" minOccurs="0" maxOccurs="1"> |
---|
| 1482 | <xsd:annotation> |
---|
| 1483 | <xsd:documentation>The maximum date index contained within the object. The minimum and maximum indexes are server query parameters and will be populated with |
---|
| 1484 | valid values in a "get" result. See the WITSML API Specification appendix on "Special Handling" of growing objects for a description of the behavior related |
---|
| 1485 | to this parameter.</xsd:documentation> |
---|
| 1486 | </xsd:annotation> |
---|
| 1487 | </xsd:element> |
---|
| 1488 | <xsd:element name="dateCurrent" type="witsml:q_dateTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1489 | <xsd:annotation> |
---|
| 1490 | <xsd:documentation>The definition of the "current date" index for this object. The current date index is a server query parameter which requests the selection |
---|
| 1491 | of a single node from a recurring set (e.g., the data related to one point in a date series). That is, the "most recent" (at or before the specified date) |
---|
| 1492 | installation for a well. See the WITSML API Specification appendix on "Special Handling" of growing objects for a description of the behavior related to this |
---|
| 1493 | parameter.</xsd:documentation> |
---|
| 1494 | <xsd:appinfo>constraints:@type="witsml:q_date",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1495 | </xsd:annotation> |
---|
| 1496 | </xsd:element> |
---|
| 1497 | <xsd:element name="wellContext" type="witsml:q_cs_wellContext" minOccurs="0" maxOccurs="1"> |
---|
| 1498 | <xsd:annotation> |
---|
| 1499 | <xsd:documentation>Contextual data about the well in which the system was installed.</xsd:documentation> |
---|
| 1500 | </xsd:annotation> |
---|
| 1501 | </xsd:element> |
---|
| 1502 | <xsd:element name="isPlanned" type="witsml:q_booleanTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1503 | <xsd:annotation> |
---|
| 1504 | <xsd:documentation>Is this a planned installation in a well, or has the installation already occurred. Note that the default value is 'false', which states |
---|
| 1505 | that this is an actual installation.</xsd:documentation> |
---|
| 1506 | <xsd:appinfo>constraints:@type="witsml:q_logicalBoolean",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1507 | </xsd:annotation> |
---|
| 1508 | </xsd:element> |
---|
| 1509 | <xsd:element name="fiberInformation" type="witsml:q_cs_dtsFiberInformation" minOccurs="0" maxOccurs="1"> |
---|
| 1510 | <xsd:annotation> |
---|
| 1511 | <xsd:documentation>Information about the fiber used, and its installation.</xsd:documentation> |
---|
| 1512 | </xsd:annotation> |
---|
| 1513 | </xsd:element> |
---|
| 1514 | <xsd:element name="instrumentBoxInformation" type="witsml:q_cs_dtsBoxInformation" minOccurs="0" maxOccurs="1"> |
---|
| 1515 | <xsd:annotation> |
---|
| 1516 | <xsd:documentation>Information about the instrument box used, and its installation.</xsd:documentation> |
---|
| 1517 | </xsd:annotation> |
---|
| 1518 | </xsd:element> |
---|
| 1519 | <xsd:element name="fiberConfiguration" type="witsml:q_stringTemplateStruct" minOccurs="0" maxOccurs="1"> |
---|
| 1520 | <xsd:annotation> |
---|
| 1521 | <xsd:documentation>The configuration of the fiber installation. Example values would be linear, linear with gauge, J, U.</xsd:documentation> |
---|
| 1522 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1523 | </xsd:annotation> |
---|
| 1524 | </xsd:element> |
---|
| 1525 | <xsd:element name="fiberEndPoint" type="witsml:q_cs_dtsFiberEndPoint" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1526 | <xsd:annotation> |
---|
| 1527 | <xsd:documentation>A fiber installed with a "U" configuration will have two ends available for hookup to an instrument box. In order to record which end is |
---|
| 1528 | cabled to the instrument box on a particular measurement run, it is necessary to identify the two ends. This complex type allows a name and description for |
---|
| 1529 | each end, so that it may be identified in a later use. This may also be useful when multiple fibers in multiple wellbores converge at the same |
---|
| 1530 | wellhead.</xsd:documentation> |
---|
| 1531 | </xsd:annotation> |
---|
| 1532 | </xsd:element> |
---|
| 1533 | <xsd:element name="fiberLength" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 1534 | <xsd:annotation> |
---|
| 1535 | <xsd:documentation>The length of the fiber installed in the wellbore.</xsd:documentation> |
---|
| 1536 | <xsd:appinfo>constraints:@type="witsml:q_lengthMeasure"</xsd:appinfo> |
---|
| 1537 | </xsd:annotation> |
---|
| 1538 | </xsd:element> |
---|
| 1539 | <xsd:element name="wellboreFiberSchematic" type="witsml:q_cs_dtsFiberInstalledPoints" minOccurs="0" maxOccurs="1"> |
---|
| 1540 | <xsd:annotation> |
---|
| 1541 | <xsd:documentation>A table of values along the length along the fiber.</xsd:documentation> |
---|
| 1542 | </xsd:annotation> |
---|
| 1543 | </xsd:element> |
---|
| 1544 | <xsd:element name="opticalBudget" type="witsml:q_measure" minOccurs="0" maxOccurs="1"> |
---|
| 1545 | <xsd:annotation> |
---|
| 1546 | <xsd:documentation>Total light budget available for the installation. This is generally measured in decibels, and indicates the total power loss for two-way |
---|
| 1547 | travel of the light in the installed fiber.</xsd:documentation> |
---|
| 1548 | <xsd:appinfo>constraints:@type="witsml:q_generalMeasureType"</xsd:appinfo> |
---|
| 1549 | </xsd:annotation> |
---|
| 1550 | </xsd:element> |
---|
| 1551 | <xsd:element name="pumpActivity" type="witsml:q_cs_dtsPumpActivity" minOccurs="0" maxOccurs="1"> |
---|
| 1552 | <xsd:annotation> |
---|
| 1553 | <xsd:documentation>The activity of pumping the fiber downhole</xsd:documentation> |
---|
| 1554 | </xsd:annotation> |
---|
| 1555 | </xsd:element> |
---|
| 1556 | <xsd:element name="otdrInstallationTest" type="witsml:q_cs_dtsOtdr" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1557 | <xsd:annotation> |
---|
| 1558 | <xsd:documentation>This captures the data from the pre-installation and post-installation OTDR tests run on the fiber. A standard quality control program |
---|
| 1559 | would include these two, but the schema allows for more than two if additional runs associated with the installation of the fiber are performed. OTDR runs |
---|
| 1560 | associated with a measurement are given as a child of the measurementInformation element.</xsd:documentation> |
---|
| 1561 | </xsd:annotation> |
---|
| 1562 | </xsd:element> |
---|
| 1563 | <xsd:element name="installationCalibration" type="witsml:q_cs_dtsCalibration" minOccurs="0" maxOccurs="unbounded"> |
---|
| 1564 | <xsd:annotation> |
---|
| 1565 | <xsd:documentation>Any calibration other than the ones explicitly given may be recorded here. This is a general calibration type, which is populated with |
---|
| 1566 | name/value pairs.</xsd:documentation> |
---|
| 1567 | </xsd:annotation> |
---|
| 1568 | </xsd:element> |
---|
| 1569 | <xsd:element name="basedOnInstalledFiber" type="witsml:q_refNameString" minOccurs="0" maxOccurs="1"> |
---|
| 1570 | <xsd:annotation> |
---|
| 1571 | <xsd:documentation>If an instrument box is changed, for example, but the fiber remains the same, this instance of installed fiber is given to record that |
---|
| 1572 | change. This element refers to a previous installed fiber, on which this one is based. For example, the wellboreFiberSchematic is unchanged, and may be |
---|
| 1573 | obtained from the previous instance of installed fiber that is referenced here.</xsd:documentation> |
---|
| 1574 | </xsd:annotation> |
---|
| 1575 | </xsd:element> |
---|
| 1576 | <xsd:element name="commonData" type="witsml:q_cs_commonData" minOccurs="0" maxOccurs="1"> |
---|
| 1577 | <xsd:annotation> |
---|
| 1578 | <xsd:documentation>A container element that contains elements that are common to all data objects.</xsd:documentation> |
---|
| 1579 | </xsd:annotation> |
---|
| 1580 | </xsd:element> |
---|
| 1581 | <xsd:element name="customData" type="witsml:q_cs_customData" minOccurs="0" maxOccurs="1"> |
---|
| 1582 | <xsd:annotation> |
---|
| 1583 | <xsd:documentation>A container element that can contain custom or user defined data elements.</xsd:documentation> |
---|
| 1584 | </xsd:annotation> |
---|
| 1585 | </xsd:element> |
---|
| 1586 | </xsd:sequence> |
---|
| 1587 | <xsd:attribute name="uidWell" type="xsd:string" use="optional"> |
---|
| 1588 | <xsd:annotation> |
---|
| 1589 | <xsd:documentation>Unique identifier for the well. This uniquely represents the well referenced by the (possibly non-unique) nameWell.</xsd:documentation> |
---|
| 1590 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1591 | </xsd:annotation> |
---|
| 1592 | </xsd:attribute> |
---|
| 1593 | <xsd:attribute name="uidWellbore" type="xsd:string" use="optional"> |
---|
| 1594 | <xsd:annotation> |
---|
| 1595 | <xsd:documentation>Unique identifier for the wellbore. This uniquely represents the wellbore referenced by the (possibly non-unique) |
---|
| 1596 | nameWellbore.</xsd:documentation> |
---|
| 1597 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1598 | </xsd:annotation> |
---|
| 1599 | </xsd:attribute> |
---|
| 1600 | <xsd:attribute name="uid" type="xsd:string" use="optional"> |
---|
| 1601 | <xsd:annotation> |
---|
| 1602 | <xsd:documentation>The unique identifier of a container element. This attribute is generally required within the context of a WITSML server. There should be no |
---|
| 1603 | assumption as to the semantic content of this attribute. This should only be used with recurring container types (i.e., maxOccurs greater than one). The value is |
---|
| 1604 | only required to be unique within the context of the nearest recurring parent element.</xsd:documentation> |
---|
| 1605 | <xsd:appinfo>constraints:@type="witsml:q_uidString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1606 | </xsd:annotation> |
---|
| 1607 | </xsd:attribute> |
---|
| 1608 | </xsd:extension> |
---|
| 1609 | </xsd:complexContent> |
---|
| 1610 | </xsd:complexType> |
---|
| 1611 | <!--UNUSED: Deleted type q_abstractBoolean.--> |
---|
| 1612 | <!--UNUSED: Deleted type q_abstractDateTime.--> |
---|
| 1613 | <!--UNUSED: Deleted type q_abstractDate.--> |
---|
| 1614 | <!--UNUSED: Deleted type abstractYear.--> |
---|
| 1615 | <!--UNUSED: Deleted type q_abstractDouble.--> |
---|
| 1616 | <!--UNUSED: Deleted type q_abstractShort.--> |
---|
| 1617 | <!--UNUSED: Deleted type abstractInt.--> |
---|
| 1618 | <!--UNUSED: Deleted type q_abstractString.--> |
---|
| 1619 | <!--UNUSED: Deleted type q_abstractMeasure.--> |
---|
| 1620 | <!--UNUSED: Deleted type q_abstractMaximumLengthString.--> |
---|
| 1621 | <!--UNUSED: Deleted type abstractUncollapsedString.--> |
---|
| 1622 | <!--UNUSED: Deleted type abstractContextualObject.--> |
---|
| 1623 | <xsd:complexType name="q_abstractSingularDataObject"> |
---|
| 1624 | <xsd:annotation> |
---|
| 1625 | <xsd:documentation>The intended abstract supertype of all singular data objects.</xsd:documentation> |
---|
| 1626 | </xsd:annotation> |
---|
| 1627 | <xsd:sequence /> |
---|
| 1628 | </xsd:complexType> |
---|
| 1629 | <!--UNUSED: Deleted type q_abstractPositiveCount.--> |
---|
| 1630 | <!--UNUSED: Deleted type q_abstractNameString.--> |
---|
| 1631 | <!--UNUSED: Deleted type q_abstractUidString.--> |
---|
| 1632 | <!--UNUSED: Deleted type q_abstractCommentString.--> |
---|
| 1633 | <!--UNUSED: Deleted type q_abstractTypeEnum.--> |
---|
| 1634 | <!--UNUSED: Deleted type q_abstractUomEnum.--> |
---|
| 1635 | <!--UNUSED: Deleted type abstractNonNegativeCount.--> |
---|
| 1636 | <!--UNUSED: Deleted type ActivityClassType.--> |
---|
| 1637 | <!--UNUSED: Deleted type ActivityCode.--> |
---|
| 1638 | <!--UNUSED: Deleted type AddressKindEnum.--> |
---|
| 1639 | <!--UNUSED: Deleted type AddressQualifier.--> |
---|
| 1640 | <!--UNUSED: Deleted type AziRef.--> |
---|
| 1641 | <!--UNUSED: Deleted type ArrayElementDataType.--> |
---|
| 1642 | <!--UNUSED: Deleted type BearingType.--> |
---|
| 1643 | <!--UNUSED: Deleted type BitDullCode.--> |
---|
| 1644 | <!--UNUSED: Deleted type BitReasonPulled.--> |
---|
| 1645 | <!--UNUSED: Deleted type BitType.--> |
---|
| 1646 | <!--UNUSED: Deleted type BhaStatus.--> |
---|
| 1647 | <!--UNUSED: Deleted type BladeShapeType.--> |
---|
| 1648 | <!--UNUSED: Deleted type BladeType.--> |
---|
| 1649 | <!--UNUSED: Deleted type BopType.--> |
---|
| 1650 | <!--UNUSED: Deleted type BoxPinConfig.--> |
---|
| 1651 | <!--UNUSED: Deleted type CalculationMethod.--> |
---|
| 1652 | <!--UNUSED: Deleted type CementJobType.--> |
---|
| 1653 | <!--UNUSED: Deleted type ConnectionPosition.--> |
---|
| 1654 | <!--UNUSED: Deleted type ContactPreference.--> |
---|
| 1655 | <!--UNUSED: Deleted type DeflectionMethod.--> |
---|
| 1656 | <!--UNUSED: Deleted type DerrickType.--> |
---|
| 1657 | <!--UNUSED: Deleted type DrawWorksType.--> |
---|
| 1658 | <!--UNUSED: Deleted type DriveType.--> |
---|
| 1659 | <!--UNUSED: Deleted type q_ElevCodeEnum.--> |
---|
| 1660 | <!--UNUSED: Deleted type Ellipsoid.--> |
---|
| 1661 | <!--UNUSED: Deleted type q_EndpointQualifier.--> |
---|
| 1662 | <!--UNUSED: Deleted type FacilityParameter.--> |
---|
| 1663 | <!--UNUSED: Deleted type q_FiberMode.--> |
---|
| 1664 | <!--UNUSED: Deleted type FlowQualifier.--> |
---|
| 1665 | <!--UNUSED: Deleted type FlowSubQualifier.--> |
---|
| 1666 | <!--UNUSED: Deleted type GasPeakType.--> |
---|
| 1667 | <!--UNUSED: Deleted type GeodeticDatum.--> |
---|
| 1668 | <!--UNUSED: Deleted type Hemispheres.--> |
---|
| 1669 | <!--UNUSED: Deleted type HoleCasingType.--> |
---|
| 1670 | <!--UNUSED: Deleted type HoleOpenerType.--> |
---|
| 1671 | <!--UNUSED: Deleted type InjectionFluid.--> |
---|
| 1672 | <!--UNUSED: Deleted type IntervalMethod.--> |
---|
| 1673 | <!--UNUSED: Deleted type IntervalType.--> |
---|
| 1674 | <!--UNUSED: Deleted type q_ItemState.--> |
---|
| 1675 | <!--UNUSED: Deleted type q_InstalledFiberPoint.--> |
---|
| 1676 | <!--UNUSED: Deleted type JarType.--> |
---|
| 1677 | <!--UNUSED: Deleted type JarAction.--> |
---|
| 1678 | <!--UNUSED: Deleted type LithologySource.--> |
---|
| 1679 | <!--UNUSED: Deleted type LithologyType.--> |
---|
| 1680 | <!--UNUSED: Deleted type LogDataType.--> |
---|
| 1681 | <!--UNUSED: Deleted type LogIndexDirection.--> |
---|
| 1682 | <!--UNUSED: Deleted type LogIndexType.--> |
---|
| 1683 | <!--UNUSED: Deleted type LogTraceOrigin.--> |
---|
| 1684 | <!--UNUSED: Deleted type LogTraceState.--> |
---|
| 1685 | <!--UNUSED: Deleted type MaterialType.--> |
---|
| 1686 | <!--UNUSED: Deleted type MeasureClass.--> |
---|
| 1687 | <!--UNUSED: Deleted type MeasurementType.--> |
---|
| 1688 | <!--UNUSED: Deleted type MessageProbability.--> |
---|
| 1689 | <!--UNUSED: Deleted type MessageSeverity.--> |
---|
| 1690 | <!--UNUSED: Deleted type MessageType.--> |
---|
| 1691 | <!--UNUSED: Deleted type MudLogParameterType.--> |
---|
| 1692 | <!--UNUSED: Deleted type NADTypes.--> |
---|
| 1693 | <!--UNUSED: Deleted type q_NameTagLocation.--> |
---|
| 1694 | <!--UNUSED: Deleted type q_NameTagNumberingScheme.--> |
---|
| 1695 | <!--UNUSED: Deleted type q_NameTagTechnology.--> |
---|
| 1696 | <!--UNUSED: Deleted type NozzleType.--> |
---|
| 1697 | <!--UNUSED: Deleted type q_OTDRReason.--> |
---|
| 1698 | <!--UNUSED: Deleted type PhoneType.--> |
---|
| 1699 | <!--UNUSED: Deleted type PitType.--> |
---|
| 1700 | <!--UNUSED: Deleted type ProductFlowPortType.--> |
---|
| 1701 | <!--UNUSED: Deleted type Projection.--> |
---|
| 1702 | <!--UNUSED: Deleted type ProjectionVariantsObliqueMercator.--> |
---|
| 1703 | <!--UNUSED: Deleted type PumpType.--> |
---|
| 1704 | <!--UNUSED: Deleted type PumpOpType.--> |
---|
| 1705 | <!--UNUSED: Deleted type QualifierType.--> |
---|
| 1706 | <!--UNUSED: Deleted type RealtimeData.--> |
---|
| 1707 | <!--UNUSED: Deleted type ReportingFacility.--> |
---|
| 1708 | <!--UNUSED: Deleted type ReportingFlow.--> |
---|
| 1709 | <!--UNUSED: Deleted type ReportingPeriod.--> |
---|
| 1710 | <!--UNUSED: Deleted type ReportingProduct.--> |
---|
| 1711 | <!--UNUSED: Deleted type ReportingProperty.--> |
---|
| 1712 | <!--UNUSED: Deleted type RigType.--> |
---|
| 1713 | <!--UNUSED: Deleted type RiskAffectedPersonnel.--> |
---|
| 1714 | <!--UNUSED: Deleted type RiskCategory.--> |
---|
| 1715 | <!--UNUSED: Deleted type RiskSubCategory.--> |
---|
| 1716 | <!--UNUSED: Deleted type RiskType.--> |
---|
| 1717 | <!--UNUSED: Deleted type ScrType.--> |
---|
| 1718 | <!--UNUSED: Deleted type ShowFluorescence.--> |
---|
| 1719 | <!--UNUSED: Deleted type ShowLevel.--> |
---|
| 1720 | <!--UNUSED: Deleted type ShowRating.--> |
---|
| 1721 | <!--UNUSED: Deleted type ShowSpeed.--> |
---|
| 1722 | <!--UNUSED: Deleted type StandardTempPress.--> |
---|
| 1723 | <!--UNUSED: Deleted type SupportCraft.--> |
---|
| 1724 | <!--UNUSED: Deleted type SurfEquipType.--> |
---|
| 1725 | <!--UNUSED: Deleted type TargetCategory.--> |
---|
| 1726 | <!--UNUSED: Deleted type TargetScope.--> |
---|
| 1727 | <!--UNUSED: Deleted type TargetSectionScope.--> |
---|
| 1728 | <!--UNUSED: Deleted type TestReason.--> |
---|
| 1729 | <!--UNUSED: Deleted type TrajStationStatus.--> |
---|
| 1730 | <!--UNUSED: Deleted type TrajStationType.--> |
---|
| 1731 | <!--UNUSED: Deleted type TubularAssembly.--> |
---|
| 1732 | <!--UNUSED: Deleted type TubularComponent.--> |
---|
| 1733 | <!--UNUSED: Deleted type TypeSurveyTool.--> |
---|
| 1734 | <!--UNUSED: Deleted type q_ValueStatus.--> |
---|
| 1735 | <!--UNUSED: Deleted type WellDirection.--> |
---|
| 1736 | <!--UNUSED: Deleted type WellFluid.--> |
---|
| 1737 | <!--UNUSED: Deleted type WellboreShape.--> |
---|
| 1738 | <!--UNUSED: Deleted type WellboreType.--> |
---|
| 1739 | <!--UNUSED: Deleted type WellPurpose.--> |
---|
| 1740 | <!--UNUSED: Deleted type WellStatus.--> |
---|
| 1741 | <!--UNUSED: Deleted type CrewType.--> |
---|
| 1742 | <!--UNUSED: Deleted type OperationKind.--> |
---|
| 1743 | <!--UNUSED: Deleted type ReasonLost.--> |
---|
| 1744 | <!--UNUSED: Deleted type SafetyType.--> |
---|
| 1745 | <!--UNUSED: Deleted type VolumeReferenceKind.--> |
---|
| 1746 | <!--UNUSED: Deleted type DataQuality.--> |
---|
| 1747 | <!--UNUSED: Deleted type FluidAnalysisKind.--> |
---|
| 1748 | <!--UNUSED: Deleted type FluidComponent.--> |
---|
| 1749 | <!--UNUSED: Deleted type FluidSampleTestAcquisition.--> |
---|
| 1750 | <!--UNUSED: Deleted type FluidComponentKind.--> |
---|
| 1751 | <!--UNUSED: Deleted type FluidContaminant.--> |
---|
| 1752 | <!--UNUSED: Deleted type FluidSampleKind.--> |
---|
| 1753 | <!--UNUSED: Deleted type ReservoirFluidKind.--> |
---|
| 1754 | <!--UNUSED: Deleted type EosModelKind.--> |
---|
| 1755 | <!--UNUSED: Deleted type q_generalMeasureType.--> |
---|
| 1756 | <!--UNUSED: Deleted type q_temperatureSlopeMeasure.--> |
---|
| 1757 | <xsd:complexType name="q_typeOptionalClassString"> |
---|
| 1758 | <xsd:annotation> |
---|
| 1759 | <xsd:documentation>A type with a classType attribute. This allows a user to give a classification of something, and to specify the type of classification that it is. |
---|
| 1760 | There is no control over the class values, or the class types.</xsd:documentation> |
---|
| 1761 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1762 | </xsd:annotation> |
---|
| 1763 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 1764 | <xsd:annotation> |
---|
| 1765 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1766 | </xsd:annotation> |
---|
| 1767 | </xsd:attribute> |
---|
| 1768 | <xsd:attribute name="classType" type="xsd:string" use="optional"> |
---|
| 1769 | <xsd:annotation> |
---|
| 1770 | <xsd:documentation>This identifies the classification system to which the class belongs.</xsd:documentation> |
---|
| 1771 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1772 | </xsd:annotation> |
---|
| 1773 | </xsd:attribute> |
---|
| 1774 | </xsd:complexType> |
---|
| 1775 | <xsd:complexType name="q_endpointQualifiedDateTime"> |
---|
| 1776 | <xsd:annotation> |
---|
| 1777 | <xsd:documentation>A timestamp value used for min/max query parameters related to "growing objects". The meaning of the endpoint of an interval can be modified by the |
---|
| 1778 | endpoint attribute.</xsd:documentation> |
---|
| 1779 | <xsd:appinfo>constraints:@base="witsml:abstractDateTime",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1780 | </xsd:annotation> |
---|
| 1781 | <xsd:attribute name="queryValue" type="xsd:dateTime"> |
---|
| 1782 | <xsd:annotation> |
---|
| 1783 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1784 | </xsd:annotation> |
---|
| 1785 | </xsd:attribute> |
---|
| 1786 | <xsd:attribute name="endpoint" type="xsd:string" use="optional"> |
---|
| 1787 | <xsd:annotation> |
---|
| 1788 | <xsd:documentation>The default is "inclusive".</xsd:documentation> |
---|
| 1789 | <xsd:appinfo>constraints:@type="witsml:q_EndpointQualifier",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1790 | </xsd:annotation> |
---|
| 1791 | </xsd:attribute> |
---|
| 1792 | </xsd:complexType> |
---|
| 1793 | <xsd:complexType name="q_endpointQualifiedDate"> |
---|
| 1794 | <xsd:annotation> |
---|
| 1795 | <xsd:documentation>A date value used for min/max query parameters related to "growing objects". The meaning of the endpoint of an interval can be modified by the endpoint |
---|
| 1796 | attribute.</xsd:documentation> |
---|
| 1797 | <xsd:appinfo>constraints:@base="witsml:abstractDate",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1798 | </xsd:annotation> |
---|
| 1799 | <xsd:attribute name="queryValue" type="xsd:date"> |
---|
| 1800 | <xsd:annotation> |
---|
| 1801 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1802 | </xsd:annotation> |
---|
| 1803 | </xsd:attribute> |
---|
| 1804 | <xsd:attribute name="endpoint" type="xsd:string" use="optional"> |
---|
| 1805 | <xsd:annotation> |
---|
| 1806 | <xsd:documentation>The default is "inclusive".</xsd:documentation> |
---|
| 1807 | <xsd:appinfo>constraints:@type="witsml:q_EndpointQualifier",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1808 | </xsd:annotation> |
---|
| 1809 | </xsd:attribute> |
---|
| 1810 | </xsd:complexType> |
---|
| 1811 | <!--UNUSED: Deleted type emailQualifierStruct.--> |
---|
| 1812 | <!--UNUSED: Deleted type facilityIdentifierStruct.--> |
---|
| 1813 | <!--UNUSED: Deleted type phoneNumberStruct.--> |
---|
| 1814 | <!--UNUSED: Deleted type q_logicalBoolean.--> |
---|
| 1815 | <!--UNUSED: Deleted type q_date.--> |
---|
| 1816 | <!--UNUSED: Deleted type month.--> |
---|
| 1817 | <!--UNUSED: Deleted type year.--> |
---|
| 1818 | <!--UNUSED: Deleted type q_timestamp.--> |
---|
| 1819 | <!--UNUSED: Deleted type timeZone.--> |
---|
| 1820 | <!--UNUSED: Deleted type calendarYear.--> |
---|
| 1821 | <!--UNUSED: Deleted type yAxisAzimuth.--> |
---|
| 1822 | <!--UNUSED: Deleted type nonNegativeFraction.--> |
---|
| 1823 | <!--UNUSED: Deleted type q_unitlessQuantity.--> |
---|
| 1824 | <!--UNUSED: Deleted type genericMeasure.--> |
---|
| 1825 | <!--UNUSED: Deleted type indexCurve.--> |
---|
| 1826 | <!--UNUSED: Deleted type ratioGenericMeasure.--> |
---|
| 1827 | <!--UNUSED: Deleted type listOfString.--> |
---|
| 1828 | <!--UNUSED: Deleted type listOfDouble.--> |
---|
| 1829 | <xsd:complexType name="q_refNameString"> |
---|
| 1830 | <xsd:annotation> |
---|
| 1831 | <xsd:documentation>A reference to a name in another node of the xml hierachy. This value represents a foreign key from one element to another.</xsd:documentation> |
---|
| 1832 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1833 | </xsd:annotation> |
---|
| 1834 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 1835 | <xsd:annotation> |
---|
| 1836 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1837 | </xsd:annotation> |
---|
| 1838 | </xsd:attribute> |
---|
| 1839 | <xsd:attribute name="uidRef" type="xsd:string" use="optional"> |
---|
| 1840 | <xsd:annotation> |
---|
| 1841 | <xsd:documentation>A reference to the unique identifier (uid attribute) in the node referenced by the name value. This attribute is required within the context of a |
---|
| 1842 | WITSML server.</xsd:documentation> |
---|
| 1843 | <xsd:appinfo>constraints:@type="witsml:q_refString",xsd:maxLength="64",xsd:pattern="[^ ]*",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1844 | </xsd:annotation> |
---|
| 1845 | </xsd:attribute> |
---|
| 1846 | </xsd:complexType> |
---|
| 1847 | <!--UNUSED: Deleted type refObjectString.--> |
---|
| 1848 | <!--UNUSED: Deleted type refPositiveCount.--> |
---|
| 1849 | <!--UNUSED: Deleted type q_refWellDatum.--> |
---|
| 1850 | <!--UNUSED: Deleted type q_nameString.--> |
---|
| 1851 | <!--UNUSED: Deleted type q_commentString.--> |
---|
| 1852 | <!--UNUSED: Deleted type q_descriptionString.--> |
---|
| 1853 | <!--UNUSED: Deleted type shortDescriptionString.--> |
---|
| 1854 | <!--UNUSED: Deleted type encodedArrayString.--> |
---|
| 1855 | <!--UNUSED: Deleted type encodedValueString.--> |
---|
| 1856 | <!--UNUSED: Deleted type q_kindString.--> |
---|
| 1857 | <!--UNUSED: Deleted type q_uomString.--> |
---|
| 1858 | <!--UNUSED: Deleted type q_uidString.--> |
---|
| 1859 | <!--UNUSED: Deleted type q_refString.--> |
---|
| 1860 | <!--UNUSED: Deleted type q_schemaVersionString.--> |
---|
| 1861 | <xsd:complexType name="q_nameStruct"> |
---|
| 1862 | <xsd:annotation> |
---|
| 1863 | <xsd:documentation>The name of something within a naming system.</xsd:documentation> |
---|
| 1864 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1865 | </xsd:annotation> |
---|
| 1866 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 1867 | <xsd:annotation> |
---|
| 1868 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1869 | </xsd:annotation> |
---|
| 1870 | </xsd:attribute> |
---|
| 1871 | <xsd:attribute name="namingSystem" type="xsd:string" use="optional"> |
---|
| 1872 | <xsd:annotation> |
---|
| 1873 | <xsd:documentation>The naming system within the name is (hopefully) unique.</xsd:documentation> |
---|
| 1874 | <xsd:appinfo>constraints:@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1875 | </xsd:annotation> |
---|
| 1876 | </xsd:attribute> |
---|
| 1877 | </xsd:complexType> |
---|
| 1878 | <xsd:complexType name="q_wellKnownNameStruct"> |
---|
| 1879 | <xsd:annotation> |
---|
| 1880 | <xsd:documentation>The name of something within a mandatory naming system with an optional code.</xsd:documentation> |
---|
| 1881 | <xsd:appinfo>constraints:@base="witsml:abstractNameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1882 | </xsd:annotation> |
---|
| 1883 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 1884 | <xsd:annotation> |
---|
| 1885 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1886 | </xsd:annotation> |
---|
| 1887 | </xsd:attribute> |
---|
| 1888 | <xsd:attribute name="namingSystem" type="xsd:string" use="optional"> |
---|
| 1889 | <xsd:annotation> |
---|
| 1890 | <xsd:documentation>The naming system within the name is unique.</xsd:documentation> |
---|
| 1891 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_nameString",xsd:maxLength="64",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1892 | </xsd:annotation> |
---|
| 1893 | </xsd:attribute> |
---|
| 1894 | <xsd:attribute name="code" type="xsd:string" use="optional"> |
---|
| 1895 | <xsd:annotation> |
---|
| 1896 | <xsd:documentation>A unique (short) code associated with the name.</xsd:documentation> |
---|
| 1897 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1898 | </xsd:annotation> |
---|
| 1899 | </xsd:attribute> |
---|
| 1900 | </xsd:complexType> |
---|
| 1901 | <!--UNUSED: Deleted type uncollapsedString.--> |
---|
| 1902 | <!--UNUSED: Deleted type iadcBearingWearCode.--> |
---|
| 1903 | <!--UNUSED: Deleted type geodeticZoneString.--> |
---|
| 1904 | <!--UNUSED: Deleted type generalQualifiedMeasure.--> |
---|
| 1905 | <!--UNUSED: Deleted type integerQualifiedCount.--> |
---|
| 1906 | <!--UNUSED: Deleted type kindQualifiedString.--> |
---|
| 1907 | <!--UNUSED: Deleted type areaQualifiedMeasure.--> |
---|
| 1908 | <!--UNUSED: Deleted type areaPerAreaQualifiedMeasure.--> |
---|
| 1909 | <!--UNUSED: Deleted type anglePerTimeQualifiedMeasure.--> |
---|
| 1910 | <!--UNUSED: Deleted type lengthPerLengthQualifiedMeasure.--> |
---|
| 1911 | <!--UNUSED: Deleted type pressureQualifiedMeasure.--> |
---|
| 1912 | <!--UNUSED: Deleted type thermodynamicTemperatureQualifiedMeasure.--> |
---|
| 1913 | <!--UNUSED: Deleted type q_volumeQualifiedMeasure.--> |
---|
| 1914 | <!--UNUSED: Deleted type q_volumeFlowRateQualifiedMeasure.--> |
---|
| 1915 | <!--UNUSED: Deleted type q_measuredDepthCoord.--> |
---|
| 1916 | <!--UNUSED: Deleted type q_MeasuredDepthUom.--> |
---|
| 1917 | <!--UNUSED: Deleted type wellVerticalDepthCoord.--> |
---|
| 1918 | <!--UNUSED: Deleted type q_wellElevationCoord.--> |
---|
| 1919 | <!--UNUSED: Deleted type q_WellVerticalCoordinateUom.--> |
---|
| 1920 | <!--UNUSED: Deleted type nonNegativeCount.--> |
---|
| 1921 | <!--UNUSED: Deleted type q_positiveCount.--> |
---|
| 1922 | <!--UNUSED: Deleted type positiveBigCount.--> |
---|
| 1923 | <!--UNUSED: Deleted type integerCount.--> |
---|
| 1924 | <!--UNUSED: Deleted type beaufortScaleIntegerCode.--> |
---|
| 1925 | <!--UNUSED: Deleted type pumpActionIntegerCode.--> |
---|
| 1926 | <!--UNUSED: Deleted type iadcIntegerCode.--> |
---|
| 1927 | <!--UNUSED: Deleted type levelIntegerCode.--> |
---|
| 1928 | <!--UNUSED: Deleted type cost.--> |
---|
| 1929 | <xsd:complexType name="q_indexedObject"> |
---|
| 1930 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 1931 | <xsd:annotation> |
---|
| 1932 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 1933 | </xsd:annotation> |
---|
| 1934 | </xsd:attribute> |
---|
| 1935 | <xsd:attribute name="index" type="xsd:string" use="optional"> |
---|
| 1936 | <xsd:annotation> |
---|
| 1937 | <xsd:documentation>Indexes things with the same name. That is the first one, the second one, etc.</xsd:documentation> |
---|
| 1938 | <xsd:appinfo>constraints:@use="required",@type="witsml:q_positiveCount",xsd:minInclusive="1",xsd:minInclusive="1",xsd:pattern=".+"</xsd:appinfo> |
---|
| 1939 | </xsd:annotation> |
---|
| 1940 | </xsd:attribute> |
---|
| 1941 | <xsd:attribute name="name" type="xsd:string" use="optional"> |
---|
| 1942 | <xsd:annotation> |
---|
| 1943 | <xsd:appinfo>constraints:@type="witsml:q_kindString",xsd:maxLength="40",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1944 | </xsd:annotation> |
---|
| 1945 | </xsd:attribute> |
---|
| 1946 | <xsd:attribute name="uom" type="xsd:string" use="optional"> |
---|
| 1947 | <xsd:annotation> |
---|
| 1948 | <xsd:appinfo>constraints:@type="witsml:q_uomString",xsd:maxLength="24",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1949 | </xsd:annotation> |
---|
| 1950 | </xsd:attribute> |
---|
| 1951 | <xsd:attribute name="description" type="xsd:string" use="optional"> |
---|
| 1952 | <xsd:annotation> |
---|
| 1953 | <xsd:appinfo>constraints:@type="witsml:q_descriptionString",xsd:maxLength="256",xsd:whiteSpace="collapse",xsd:minLength="1"</xsd:appinfo> |
---|
| 1954 | </xsd:annotation> |
---|
| 1955 | </xsd:attribute> |
---|
| 1956 | </xsd:complexType> |
---|
| 1957 | <!--UNUSED: Deleted type str2.--> |
---|
| 1958 | <!--UNUSED: Deleted type str16.--> |
---|
| 1959 | <!--UNUSED: Deleted type str32.--> |
---|
| 1960 | <!--UNUSED: Deleted type crewCount.--> |
---|
| 1961 | <!--UNUSED: Deleted type lostVolumeAndReason.--> |
---|
| 1962 | <!--UNUSED: Deleted type safetyCount.--> |
---|
| 1963 | <!--UNUSED: Deleted type binaryInteractionCoefficient.--> |
---|
| 1964 | <!--UNUSED: Deleted type q_massConcentrationMeasurePercent.--> |
---|
| 1965 | <!--UNUSED: Deleted type q_molarFractionMeasurePercent.--> |
---|
| 1966 | <!--UNUSED: Deleted type volumePerVolumeMeasurePercent.--> |
---|
| 1967 | <!--UNUSED: Deleted type q_PercentUom.--> |
---|
| 1968 | <!--UNUSED: Deleted type accelerationLinearMeasure.--> |
---|
| 1969 | <!--UNUSED: Deleted type q_amountOfSubstanceMeasure.--> |
---|
| 1970 | <!--UNUSED: Deleted type anglePerLengthMeasure.--> |
---|
| 1971 | <!--UNUSED: Deleted type anglePerTimeMeasure.--> |
---|
| 1972 | <!--UNUSED: Deleted type areaMeasure.--> |
---|
| 1973 | <!--UNUSED: Deleted type areaPerAreaMeasure.--> |
---|
| 1974 | <!--UNUSED: Deleted type q_densityMeasure.--> |
---|
| 1975 | <!--UNUSED: Deleted type q_dimensionlessMeasure.--> |
---|
| 1976 | <!--UNUSED: Deleted type dynamicViscosityMeasure.--> |
---|
| 1977 | <!--UNUSED: Deleted type electricPotentialMeasure.--> |
---|
| 1978 | <!--UNUSED: Deleted type energyPerAreaMeasure.--> |
---|
| 1979 | <!--UNUSED: Deleted type equivalentPerMassMeasure.--> |
---|
| 1980 | <!--UNUSED: Deleted type forceMeasure.--> |
---|
| 1981 | <!--UNUSED: Deleted type forcePerVolumeMeasure.--> |
---|
| 1982 | <!--UNUSED: Deleted type q_frequencyMeasure.--> |
---|
| 1983 | <!--UNUSED: Deleted type illuminanceMeasure.--> |
---|
| 1984 | <!--UNUSED: Deleted type q_lengthMeasure.--> |
---|
| 1985 | <!--UNUSED: Deleted type q_lengthPerLengthMeasure.--> |
---|
| 1986 | <!--UNUSED: Deleted type magneticFieldStrengthMeasure.--> |
---|
| 1987 | <!--UNUSED: Deleted type q_massConcentrationMeasure.--> |
---|
| 1988 | <!--UNUSED: Deleted type q_massFlowRateMeasure.--> |
---|
| 1989 | <!--UNUSED: Deleted type q_massMeasure.--> |
---|
| 1990 | <!--UNUSED: Deleted type massPerLengthMeasure.--> |
---|
| 1991 | <!--UNUSED: Deleted type q_modulusOfCompressionMeasure.--> |
---|
| 1992 | <!--UNUSED: Deleted type momentOfForceMeasure.--> |
---|
| 1993 | <!--UNUSED: Deleted type perLengthMeasure.--> |
---|
| 1994 | <!--UNUSED: Deleted type planeAngleMeasure.--> |
---|
| 1995 | <!--UNUSED: Deleted type powerMeasure.--> |
---|
| 1996 | <!--UNUSED: Deleted type q_pressureMeasure.--> |
---|
| 1997 | <!--UNUSED: Deleted type relativePowerMeasure.--> |
---|
| 1998 | <!--UNUSED: Deleted type specificVolumeMeasure.--> |
---|
| 1999 | <!--UNUSED: Deleted type q_thermodynamicTemperatureMeasure.--> |
---|
| 2000 | <!--UNUSED: Deleted type timeMeasure.--> |
---|
| 2001 | <!--UNUSED: Deleted type q_velocityMeasure.--> |
---|
| 2002 | <!--UNUSED: Deleted type volumeMeasure.--> |
---|
| 2003 | <!--UNUSED: Deleted type volumeFlowRateMeasure.--> |
---|
| 2004 | <!--UNUSED: Deleted type q_volumePerVolumeMeasure.--> |
---|
| 2005 | <!--UNUSED: Deleted type q_workMeasure.--> |
---|
| 2006 | <!--UNUSED: Deleted type compressibilityMeasure.--> |
---|
| 2007 | <!--UNUSED: Deleted type molarVolumeMeasure.--> |
---|
| 2008 | <!--UNUSED: Deleted type standardVolumeMeasure.--> |
---|
| 2009 | <!--UNUSED: Deleted type thermalConductivityMeasure.--> |
---|
| 2010 | <!--UNUSED: Deleted type volumePerStandardVolumeMeasure.--> |
---|
| 2011 | <!--UNUSED: Deleted type standardVolumePerStandardVolumeMeasure.--> |
---|
| 2012 | <!--UNUSED: Deleted type standardVolumePerVolumeMeasure.--> |
---|
| 2013 | <!--UNUSED: Deleted type accelerationLinearUom.--> |
---|
| 2014 | <!--UNUSED: Deleted type q_amountOfSubstanceUom.--> |
---|
| 2015 | <!--UNUSED: Deleted type anglePerLengthUom.--> |
---|
| 2016 | <!--UNUSED: Deleted type anglePerTimeUom.--> |
---|
| 2017 | <!--UNUSED: Deleted type areaUom.--> |
---|
| 2018 | <!--UNUSED: Deleted type areaPerAreaUom.--> |
---|
| 2019 | <!--UNUSED: Deleted type q_densityUom.--> |
---|
| 2020 | <!--UNUSED: Deleted type q_dimensionlessUom.--> |
---|
| 2021 | <!--UNUSED: Deleted type dynamicViscosityUom.--> |
---|
| 2022 | <!--UNUSED: Deleted type electricPotentialUom.--> |
---|
| 2023 | <!--UNUSED: Deleted type energyPerAreaUom.--> |
---|
| 2024 | <!--UNUSED: Deleted type equivalentPerMassUom.--> |
---|
| 2025 | <!--UNUSED: Deleted type forceUom.--> |
---|
| 2026 | <!--UNUSED: Deleted type forcePerVolumeUom.--> |
---|
| 2027 | <!--UNUSED: Deleted type q_frequencyUom.--> |
---|
| 2028 | <!--UNUSED: Deleted type illuminanceUom.--> |
---|
| 2029 | <!--UNUSED: Deleted type q_lengthUom.--> |
---|
| 2030 | <!--UNUSED: Deleted type q_lengthPerLengthUom.--> |
---|
| 2031 | <!--UNUSED: Deleted type magneticFieldStrengthUom.--> |
---|
| 2032 | <!--UNUSED: Deleted type q_massConcentrationUom.--> |
---|
| 2033 | <!--UNUSED: Deleted type q_massFlowRateUom.--> |
---|
| 2034 | <!--UNUSED: Deleted type q_massUom.--> |
---|
| 2035 | <!--UNUSED: Deleted type massPerLengthUom.--> |
---|
| 2036 | <!--UNUSED: Deleted type q_modulusOfCompressionUom.--> |
---|
| 2037 | <!--UNUSED: Deleted type momentOfForceUom.--> |
---|
| 2038 | <!--UNUSED: Deleted type perLengthUom.--> |
---|
| 2039 | <!--UNUSED: Deleted type planeAngleUom.--> |
---|
| 2040 | <!--UNUSED: Deleted type powerUom.--> |
---|
| 2041 | <!--UNUSED: Deleted type q_pressureUom.--> |
---|
| 2042 | <!--UNUSED: Deleted type relativePowerUom.--> |
---|
| 2043 | <!--UNUSED: Deleted type specificVolumeUom.--> |
---|
| 2044 | <!--UNUSED: Deleted type q_thermodynamicTemperatureUom.--> |
---|
| 2045 | <!--UNUSED: Deleted type timeUom.--> |
---|
| 2046 | <!--UNUSED: Deleted type q_velocityUom.--> |
---|
| 2047 | <!--UNUSED: Deleted type q_volumeUom.--> |
---|
| 2048 | <!--UNUSED: Deleted type q_volumeFlowRateUom.--> |
---|
| 2049 | <!--UNUSED: Deleted type q_volumePerVolumeUom.--> |
---|
| 2050 | <!--UNUSED: Deleted type q_workUom.--> |
---|
| 2051 | <!--UNUSED: Deleted type compressibilityUom.--> |
---|
| 2052 | <!--UNUSED: Deleted type molarVolumeUom.--> |
---|
| 2053 | <!--UNUSED: Deleted type thermalConductivityUom.--> |
---|
| 2054 | <xsd:complexType name="q_booleanTemplateStruct"> |
---|
| 2055 | <xsd:attribute name="queryValue" type="xsd:boolean"> |
---|
| 2056 | <xsd:annotation> |
---|
| 2057 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2058 | </xsd:annotation> |
---|
| 2059 | </xsd:attribute> |
---|
| 2060 | </xsd:complexType> |
---|
| 2061 | <!--UNUSED: Deleted type q_shortTemplateStruct.--> |
---|
| 2062 | <!--UNUSED: Deleted type q_intTemplateStruct.--> |
---|
| 2063 | <xsd:complexType name="q_stringTemplateStruct"> |
---|
| 2064 | <xsd:attribute name="queryValue" type="xsd:string"> |
---|
| 2065 | <xsd:annotation> |
---|
| 2066 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2067 | </xsd:annotation> |
---|
| 2068 | </xsd:attribute> |
---|
| 2069 | </xsd:complexType> |
---|
| 2070 | <xsd:complexType name="q_doubleTemplateStruct"> |
---|
| 2071 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
| 2072 | <xsd:annotation> |
---|
| 2073 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2074 | </xsd:annotation> |
---|
| 2075 | </xsd:attribute> |
---|
| 2076 | </xsd:complexType> |
---|
| 2077 | <xsd:complexType name="q_dateTimeTemplateStruct"> |
---|
| 2078 | <xsd:attribute name="queryValue" type="xsd:dateTime"> |
---|
| 2079 | <xsd:annotation> |
---|
| 2080 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2081 | </xsd:annotation> |
---|
| 2082 | </xsd:attribute> |
---|
| 2083 | </xsd:complexType> |
---|
| 2084 | <xsd:complexType name="q_dateTemplateStruct"> |
---|
| 2085 | <xsd:attribute name="queryValue" type="xsd:date"> |
---|
| 2086 | <xsd:annotation> |
---|
| 2087 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2088 | </xsd:annotation> |
---|
| 2089 | </xsd:attribute> |
---|
| 2090 | </xsd:complexType> |
---|
| 2091 | <!--UNUSED: Deleted type q_gYearTemplateStruct.--> |
---|
| 2092 | <xsd:complexType name="q_measure"> |
---|
| 2093 | <xsd:attribute name="uom" type="xsd:string"> |
---|
| 2094 | <xsd:annotation> |
---|
| 2095 | <xsd:documentation>The unit of measure for the value.</xsd:documentation> |
---|
| 2096 | </xsd:annotation> |
---|
| 2097 | </xsd:attribute> |
---|
| 2098 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
| 2099 | <xsd:annotation> |
---|
| 2100 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2101 | </xsd:annotation> |
---|
| 2102 | </xsd:attribute> |
---|
| 2103 | </xsd:complexType> |
---|
| 2104 | <!--UNUSED: Deleted type q_measureWithQualifier.--> |
---|
| 2105 | <xsd:complexType name="q_verticalCoord"> |
---|
| 2106 | <xsd:attribute name="uom" type="xsd:string"> |
---|
| 2107 | <xsd:annotation> |
---|
| 2108 | <xsd:documentation>The unit of measure for the value.</xsd:documentation> |
---|
| 2109 | </xsd:annotation> |
---|
| 2110 | </xsd:attribute> |
---|
| 2111 | <xsd:attribute name="datum" type="xsd:string"> |
---|
| 2112 | <xsd:annotation> |
---|
| 2113 | <xsd:documentation>The datum of the coordinate value.</xsd:documentation> |
---|
| 2114 | </xsd:annotation> |
---|
| 2115 | </xsd:attribute> |
---|
| 2116 | <xsd:attribute name="queryValue" type="xsd:double"> |
---|
| 2117 | <xsd:annotation> |
---|
| 2118 | <xsd:documentation>The element value for which a match is requested.</xsd:documentation> |
---|
| 2119 | </xsd:annotation> |
---|
| 2120 | </xsd:attribute> |
---|
| 2121 | </xsd:complexType> |
---|
| 2122 | <!--UNUSED: Deleted type q_integerString.--> |
---|
| 2123 | </xsd:schema> |
---|