Super-types: | None |
---|---|
Sub-types: | None |
Name | cs_wellTestPointData |
---|---|
Used by (from the same schema document) | Complex Type cs_wellTestProductionTestData |
Abstract | no |
Documentation | Well test data gathered at points in the wellbore. |
'The temperature at the point.'
'The P/Z value at the point. This is P/Z, pressure over gas compressibility factor (z). Note that the uom is units of pressure., since Z is dimensionless.'
'Defines the wellbore (sidetract) represented by the measured depth. This must be given when the well has multiple wellbores and the measured depth value is deeper than the first kickoff point. It is recommended that it always be given.'
'A value of true (1 or \"true\") indicates that the point is at the bottomhole. A value of false (0 or \"false\") or not given indicates otherwise.'
'A value of true (1 or \"true\") indicates a static (non-flowing) pressure. A value of false (0 or \"false\") or not given indicates otherwise. The pressure may be measured (e.g., shut-in well) or calculated.'