POSC License Agreement
This file is distributed under the POSC License Agreement at
http://www.posc.org/about/license.shtml.
Use of this file constitutes agreement with the POSC License Agreement.
<xsd:documentation>The diameter of the cable and all its sheathing, generally
measured in microns (um). This is intended to be the diameter of the cable on the spool.</xsd:documentation>
<xsd:documentation>The refractive index of the fiber. Also included is the frequency
in Hz for which this refractive index is valid. There may be multiple instances of this element.</xsd:documentation>
<xsd:documentation>The power loss (usually in decibels) per unit of length of
the fiber. Also included is the frequency for which this loss is measured.
There ay be multiple instances of this element.</xsd:documentation>
<xsd:documentation>Additional parameters to define the fiber as a material.
These should not be parameters to define the installation of the fiber in a
well, or other system. This element should be used only if an appropriate
parameter is not available as an element, or in the calibration operation.</xsd:documentation>
<xsd:documentation>A fiber may go through several manufacturers for its various
parts. The supplier is the final company in the chain that supplies the fiber
to the end user.</xsd:documentation>
<xsd:documentation>A fiber may go through several manufacturers for its various
parts. The supplier is the final company in the chain that supplies the fiber
to the end user.</xsd:documentation>
<xsd:documentation>The model number (alphanumeric) that is used by the supplier
to reference the type of fiber that is supplied to the user.</xsd:documentation>
<xsd:documentation>Information about calibrations and quality checks that were
performed on the cable at the factory. This is not to include calibrations that
are run at installation time and at measurement time.</xsd:documentation>