1 | |
---|
2 | ======================================================================================= |
---|
3 | Changes since v1.3.1.0 |
---|
4 | ======================================================================================= |
---|
5 | Retained the namespace as "http://www.witsml.org/schemas/131" |
---|
6 | Changed the XML schema version attribute from "1.3.1.0" to "1.3.1.1". |
---|
7 | In typ_dataTypes.xsd, modified schemaVersionString to not allow "1.3.1.0". |
---|
8 | |
---|
9 | Issue 1.3-40 "Do somebody need runNumber as a string?" |
---|
10 | In grp_log, grp_wellLog and cs_realtimeHeader, added bhaRunNumber. |
---|
11 | In grp_bhaRun, clarified that numStringRun is the BHA run number. |
---|
12 | |
---|
13 | Issue 1.3-59 "Why do 1.3 use maxOccurs="2" for interval ?" |
---|
14 | In cs_realtimeHeader, deleted interval. |
---|
15 | In cs_groupDefinition, changed maxOccurs of interval from 2 to 1. |
---|
16 | In cs_channelDefinition, changed maxOccurs of interval from 2 to 1. |
---|
17 | In cs_interval, deleted uid. |
---|
18 | |
---|
19 | Issue 1.3.1-3 "Schema Error in trajectoryStation" |
---|
20 | In grp_trajectoryStation, change the type of magTotalFieldReference |
---|
21 | from accelerationLinearMeasure to magneticInductionMeasure. |
---|
22 | |
---|
23 | Issue 1.3.1-4 "Units of Pressure" |
---|
24 | In witsmlUnitDict.xml, deprecated psig and psia. |
---|
25 | |
---|
26 | Issue 1.3.1-6 "Schema Error in grp_cementJob.xsd" |
---|
27 | In grp_cementJob, change the type of rpmPipeRecip from momentOfForceMeasure |
---|
28 | to anglePerTimeMeasure. |
---|
29 | |
---|
30 | Issue 1.3.1-7 "Errors in enums" |
---|
31 | In enumValues.xml, change "aasalt" to "basalt". |
---|
32 | Change "do description" to "no description". |
---|
33 | |
---|
34 | Issue 1.3.1-8 "mudLog Lithology-GIs without mdBottom" |
---|
35 | In cs_geologyInterval, made mdBottom mandatory. |
---|
36 | Documented a point interval as top=bottom. |
---|
37 | |
---|
38 | Issue 1.3.1-9 "Significant wave in cs_weather" |
---|
39 | In cs_weather, added significantWave. |
---|
40 | Also added maxWave which was mistakenly omitted from the request. |
---|
41 | |
---|
42 | Issue 1.3.1-11 "Unit of measure: mol" |
---|
43 | In witsmlUnitDict.xml, deprecated mol. |
---|
44 | |
---|
45 | Issue 1.3.1-13 "Is mnemonic unique?" |
---|
46 | In cs_logCurveInfo, document that mnemonic must be unique for all curves in a log. |
---|
47 | In cs_blockInfo, document that each curve in the block must have a different mnemonic. |
---|
48 | |
---|
49 | Issue 1.3.1-16 "commonData still missing in trajectoryStation?" |
---|
50 | In cs_trajectoryStation, added an include for cs_commonData.xsd. |
---|
51 | |
---|
52 | Issue 1.3.1-17 "issue with witsmlUnitDict.xml" |
---|
53 | In witsmlUnitDict.xml, deleted <!DOCTYPE defineIDs [ ... ]> |
---|
54 | |
---|
55 | Issue 1.3.1-18 "Grad unit of measure" |
---|
56 | In witsmlUnitDict.xsd, deprecated grad. |
---|
57 | As part of new dictionary, added "dB/km", "tonfUK/ft2". |
---|
58 | Modified Units.xsl to flag deprecated values. |
---|
59 | |
---|
60 | Issue 1.3.1-22 "Measurement assigned to Trajectory magnetic data" |
---|
61 | Change the type of the following |
---|
62 | from magneticFieldStrengthMeasure to magneticInductionMeasure (flux density): |
---|
63 | In grp_trajectoryStation, |
---|
64 | magTotalUncert |
---|
65 | In cs_stnTrajRawData, |
---|
66 | magAxialRaw |
---|
67 | magTran1Raw |
---|
68 | magTran2Raw |
---|
69 | In cs_stnTrajCorUsed, |
---|
70 | magAxialDrlstrCor |
---|
71 | magTran1DrlstrCor |
---|
72 | magTran2DrlstrCor |
---|
73 | In cs_stnTrajValid, |
---|
74 | magTotalFieldCalc |
---|
75 | |
---|
76 | Issue 1.3.1-23 "mudLog-131 issues for the Houston Meeting" |
---|
77 | In cs_lithology, changed the type of lithPc |
---|
78 | from lengthPerLengthMeasure to volumePerVolumeMeasurePercent. |
---|
79 | In lithPc, documented that the sum over an interval should be 100 percent. |
---|
80 | In cs_qualifier, changed the type of abundance |
---|
81 | from volumePerVolumeMeasure to volumePerVolumeMeasurePercent. |
---|
82 | Documented that mdTop and mdBottom must be within the range of the |
---|
83 | geologicInterval. |
---|
84 | In enumValues.xml, added "undifferentiated" to LithologyType. |
---|
85 | |
---|
86 | Issue 1.3.1-25 "units for mudLog-geologyInterval-averageTorque" |
---|
87 | In cs_geologyInterval, added currentAv. |
---|
88 | |
---|
89 | Issue 1.3.1-28 "WITSML quantity type request" |
---|
90 | In cs_tubularComponent, changed the type of the following |
---|
91 | from energyPerAreaMeasure to forcePerLengthMeasure: |
---|
92 | bendStiffness |
---|
93 | axialStiffness |
---|
94 | torsionalStiffness |
---|