Summary report Wellbore: End time:

Report Number: Period:: - Wellbore: Wellbore Id: Status: Created Date:

Summary of Activities (24 Hours)

Summary of Planned Activities (Next 24 Hours)

Operation

Start Time End Time Start Depth mMD End Depth mMD Depth mMD Main Oper Class Main Oper Eval Class Remark

Equipment Failure Information

Start Depth mMD Sub Equip Syst Class Operation Downtime Equipment Repaired Equip Failure Description

Bit record

Bit size Run No Model Hours drilled MD start MD end Dull grade Hole made (run) Hours drilled (run) ROP Total hole made Total hours drilled Total ROP

Casing/Liner/Tubing information

Type of pipe Casing type Run time Description Nominal outside diameter Nominal inside diameter Nominal Weight Nominal Grade Nominal Connection Length Top/Hangar MD Bottom/Shoe MD

Cement information

Start Time End Time Job Type Casing string diameter Comments Top plug used Bottom plug used Plug failed to bump Plug bump pressure Float failed Pressure release time Full returns cement volume returns Reciprocated Rotated

Cementing Fluid Details

Sample Time MD At Logging Fluid Type Fluid Description Volume Pumped Fluid Density Fluid Viscosity Yield Point Mix Water Ratio Free Water Thick Time Comments

Pore Pressure

Reading Equ Mud Weight Time Depth mMD Depth mTVD

Survey Station

Depth mMD Depth mTVD Inclination deg Azimuth deg

Log Information

Logging company: Run No Depth Top mMD Depth Bottom mMD Tool BHCT BHST

Core Information

Core No Depth Top mMD Depth Bottom mMD Core length m Recover core % Core barrel length m Inner barrel type Description

Well Test Information

Time Test No. Type Depth Top mMD Depth Bottom mMD Choke Orifice Size Density Crude Oil Oil Flow Rate Gas Flow Rate Water Flow Rate Shut in Pressure Flow Pressure Bottom Hole Pressure Gas Oil Ratio Water Oil Ratio Chloride Content CO2 Content H2S Content

Formation Test

Depth mMD Formation Pore Pressure Good Seal Ind Depth to Sample Point mMD Dominate Fluid Component HC Component Density Sample Volume Description

Stratigraphic Information

Depth to Top of Formation mMD Depth to Top of Formation mTVD Formation Name

Lithology Information

Start Depth mMD End Depth mMD Difference in Depth mMD Start Depth mTVD End Depth mTVD Difference in Depth mTVD Shows Description Lithology Description

Well Control Incident

Date Depth of Well mMD Depth of Well mTVD Lost Time Time for Well Control Regain Depth at Bit mMD Drilling Fluid Density Pore Pressure Depth to Casing mMD Gained Vol of Fluid Shut in Casing Pressure Shut in Drill Pipe Pressure Incident Class Killing Procd Formation BHT

Perforation Information

Time of Opening Well Perf Time of Closing Well Perf Duration Well Perf Top of Perf mMD Bottom of Perf mMD Top of Perf mTVD Bottom of Perf mTVD

Gas Reading Information

Time Class Depth to Top mMD Depth to Bottom mMD Depth to Top mTVD Depth to Bottom mTVD Highest Gas Lowest Gas C1 C2 C3 IC4 IC5

Operator: Drilling contractor: Rig Name: NPD Rig Id: Elevation RKB-MSL (): Spud Date: Date Well Complete: Water Depth MSL (): Tight well: High Pressure - High Temperature: Pressure (): Temperature (): Rig Type: Wellbore type: Depth at Kick Off mMD: Depth at Kick Off mTVD: Depth mMD: Depth mTVD: Plug Back Depth mMD: Dist Drilled : Penetration Rate : Hole Dia : Pressure Test Type: Formation Strength : Depth At Formation Strength mMD: Depth At Formation Strength mTVD: Dia Last Casing : Depth At Last Casing mMD: Depth At Last Casing mTVD: